Reset to factory default To reset the thermostat to factory default setting, go to Installer setupadvanced menu. To access the advanced menu, press and hold the thermostat Menu button for 5 seconds. Touch < or > to go to RESET menu.
How do I reset my Honeywell smart thermostat?
Press and hold the weather button for 5-10 seconds until the Menu shows up. Scroll down with the arrow until you find Factory Reset and tap OK. Confirm you want to proceed by tapping Yes.
How do I reset my Honeywell t6 Pro Z-Wave thermostat?
Reset to factory default
To reset the thermostat to factory default setting, go to Installer setupadvanced menu. To access the advanced menu, press and hold the thermostat Menu button for 5 seconds. Touch < or > to go to RESET menu.
How do I reset my Honeywell thermostat schedule?
To clear the program schedule on your Honeywell Thermostat, press the Hold button. For all scheduled periods, this will overrule the set temperature. The programmed schedule is cleared when you hold down the Hold button, and you will be prompted to enter a new temperature setting for the thermostat.
How do I reset my Honeywell thermostat after changing batteries?
Factory Reset the Thermostat
- Ensure that your thermostat is turned off.
- Open the door of the battery compartment.
- Now take out the batteries.
- Put the batteries back on in reverse to the indicated polarity by the markings in the battery holder.
- Allow the batteries to stay this way for about five seconds.
The Honeywell T5, T5+, and T6 models have quick access reset mode without a button. If you press and hold the MENU button, a reset option will appear. Select the RESET option and confirm with the OK button. Your Honeywell T5, T5+, or T6 thermostat is now reset.
How do I unlock my Z-Wave thermostat?
Unlock the keypad for your T6 Pro Z-Wave Thermostat using these easy steps:
- Press the lock symbol on the display. You’ll then be prompted to enter the PIN number.
- Press the +/- buttons to change the digit.
- Press Select to enter the digit.
- Repeat Steps 2 and 3 until you finish through the four numbers required.
How do I reset my Honeywell thermostat without battery?
To manually reset a thermostat, first turn off your thermostat using the power control switch. Then, turn off the breaker on your electrical panel. Wait about a minute, and then turn both back on. This should give the system time to reset.
What is wrong with my Honeywell thermostat?
A Honeywell thermostat may be malfunctioning generally, and this is the cause of its inability to hold temperature. If your screen is blank and unresponsive, or flashing, it may mean your thermostat’s batteries are dying.If your thermostat looks totally fine, the problem is likely with the sensor.
What is Z-Wave thermostat?
A Z-Wave thermostat allows you to control your home’s temperature from anywhere using a smartphone.You can program your thermostat to operate on a set schedule for daily use.
What is Z-Wave system?
Z-Wave is a wireless protocol harnessing low-energy radio waves to help smart devices or appliances communicate successfully with one another. Zensys from Denmark developed Z-Wave in 2001. The stated goal was to create a cost-effective Zigbee alternative enabling devices from different brands to communicate in harmony.
How do I turn off the schedule on my thermostat?
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen. Press the Run button if you wish to cancel either override and resume the schedule.
What do you do when your Honeywell thermostat stops working?
First, head over to your electrical breaker box and turn off the power source to your thermostat. Next, turn the thermostat off and carefully remove the top cover of the unit. Look at the wiring and check if anything is loose, broken, or disconnected. Also, check to see if everything is clean.
Do I need to reset my thermostat after changing batteries?
Factory Reset the Thermostat
Then factory resetting could be your best bet. That is, if you’re sure you have the right batteries and they are correctly placed, but your thermostat is not functioning correctly, then try to reset it.
Does the Honeywell thermostat have a battery?
The battery compartment on a Honeywell thermostat is located on the side of the device. To remove it, first push the tab on the top of the thermostat. Then pull it to remove the compartment it should slide right out.
What is Z-Wave controller Honeywell?
The Honeywell 5800ZBRIDGE is a Z-Wave® controller for home automation that provides intelligent energy management.
Contents