The blinking blue light indicates that your camera has already acquired the router information, but the network is poor.Reboot your router. 2. Check whether the router your camera connected can work normally.
How do I turn off the blue light on my WYZE camera?
- Why are you staring at the back of the camera?
- Go to Advanced Settings and turn off “Camera Status Light”.
How do I get my WYZE camera back online?
Reboot your Wyze Base Station to reestablish the connection.
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
Does WYZE camera light up when someone is watching?
I have 3 Wyze cameras. One in the newer model with the blue light that turns red when someone is viewing the feed.
Someone viewing camera.
| Status light state: | What does the light mean? |
|---|---|
| Solid red light | Camera is powered and starting up, or Watching live stream or Recording alarm video |
How do I reconnect my WYZE camera to WiFi?
Press and hold the on/off button on the side of the Plug until the status light begins to flash blue. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.
Why is Wyze camera flashing?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor. You can try as following:Check whether the router your camera connected can work normally.
How do I get my Wyze camera out of night mode?
In the Wyze app, tap on your Wyze Cam. Tap the Settings icon on the top right. Tap Advanced Settings. Tap the toggle next to Night Vision IR Lights to Off.
Why does my WYZE camera keep going offline?
Troubleshooting: Try power cycling your camera by unplugging for about 30 seconds and plugging it back in. Reboot your router.
Why do my WYZE bulbs keep going offline?
Check that the bulb is plugged in and turned on at the light socket or physical switch. The bulb requires a constant power source to stay connected. If connected to a dimmer switch, make sure the dimmer switch is set to maximum to ensure the bulb is getting the power it needs.
How do you reset a WYZE camera?
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.
Can WYZE camera see in dark?
Wyze Cam Pan v2 can see color in varying levels of darkness. If you enable the Dusk setting, the v2 will switch the view from color to black and white, and turn on IR LED lights, when the environment has low light.
Do WYZE cameras work in the dark?
Yes, the Wyze Cams and Wyze Cam Pan have the included function of night vision. The night vision works with the help of IR LED lights The maximum distance that the cameras can reach at night time is 29.6 feet.Membership discounts on Wyze products are only available on purchases on Wyze.com.
Does WYZE have night vision?
The Wyze Cam Outdoor has 8 LED infrared (IR) lights that turn when Night Vision is On. The camera also has an infrared light filter that drops in front of the camera lens to view the video feed using the infrared light. You may hear a clicking sound when Night Vision is turned on or off.
What happens if you unplug WYZE camera?
If you unplug your camera then plug it in again in the same WiFi environment your camera will automatically reconnect to the WiFi network. You do not need to re-enter the WiFi information again. It may take a minute or two for your camera to initialize and get connected to the network.
Do I have to keep my WYZE camera plugged in?
In addition to being powered through the Micro USB port, the Wyze Cam Outdoor has an internal battery that allows it to work without being plugged in.
How do I sync my WYZE camera?
To set up your Wyze Cam or Wyze Cam Pan:
- In the Wyze app, tap Home, then tap + plus sign on the top left.
- Tap Add Device.
- Tap Cameras > Wyze Cam or Wyze Cam Pan.
- With your camera plugged into an outlet, tap Next in the app.
- Pull the base from your camera and single-press SETUP on the bottom of the camera.
How long does it take for a WYZE camera to charge?
It’s an easy process, as it relies on the Base Station for network communication. Fully charge your Wyze Cam Outdoor before setting it up the first time. This can take up to 4 hours. Once fully charged the light will switch from flashing red to solid red.
Why is Wyze so dark?
If Night Vision is enabled, and the image looks black and white while the room’s lights are turned on (or while the sun is up), but looks completely black in the dark, this could be a sign that the IR lights are simply turned off.Tap the toggle next to Night Vision IR Lights so that it’s on.
How do I turn off the Wyze camera light?
Turn Status Light Off
If you hear Voice Prompts and setup is successful, navigate to Camera Settings -> Advanced Settings -> Toggle Camera Status Light Off/On and the LED will turn on.
Can WYZE Cam detect motion through glass?
No. The PIR Motion Sensor isn’t capable of detecting motion through the glass.
How do I reconnect my WYZE camera after unplugging?
Power cycle your Wyze Cam. Unplug your camera from the power outlet, wait 5-10 seconds, then plug it back into power.
Contents