Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.Measure from the top of the rod to your desired length.
What size traverse rod do I need?
Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.
What is a standard traverse rod?
What are traverse curtain rods? Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.
How do you measure pinch pleated drapes on a traverse rod?
How to Measure: Pinch Pleat-Curtains
- MEASURE LENGTH. Measure from the top of the curtain rod down to where you want the curtain to fall.
- MEASURE WIDTH. Measure straight across the window.
- STYLING TIP. We recommend Traverse Rods, which allow easy open and close sliding, via a track system.
How do you measure for hanging curtain rods?
To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.
What is the standard curtain rod size?
Curtain rods are available in a variety of lengths. The most standard sizes you’ll find in stores are 28-48 inches, 48-84 inches, 66-120 inches or 120-170 inches. These ready-made options cater to most common window sizes, but it’s best to purchase adjustable rods that can accommodate a broader range of window sizes.
How much wider than window should curtain rod be?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How far above a window should a curtain rod be?
between four to six inches
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Can I hang regular curtains on a traverse rod?
Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.
What is a two way traverse rod?
Curtain rods with two operable layers of fabric are called double traverse rods.For a stronger double rod, visit our heavy-duty curtain rods section.
What kind of curtains do you put on a traverse rod?
Curtains for a traverse rod are referred to as pinch pleat curtains. They require the use of special curtain pins to hang (pins are often included with drapes, but not always). The best way to find traverse curtains is to consult a drapery professional, as they are often a special-order item.
How many inches are between pinch pleats?
4 inches is recommended for a leading edge. Then you have to divide the rest of the curtain into spaces and pleats. Mine looked like this.
How wide should pleated curtains be?
To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2? times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1? times the width.
How high do I hang curtain rod for 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
How wide should curtains be for 36 inch window?
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
How much should a curtain pole overhang?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again. Then cut the pole to your required width (excluding finials).
How high do you hang 84 inch curtains with grommets?
around 82.5 inches
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
How far apart should curtain rod brackets be?
As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.
Should curtains touch the floor or window sill?
In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.
Is it OK for curtains to drag on the floor?
Curtains that are dragging on the floor don’t look good either, can be a hazard, and collect dust more easily. How to fix it: Aim for the magic middle ground (literally)curtains that hover just above the floor. To find the right curtain length, measure from the floor to where you’ll hang the rod.
How do you hang curtains to make a room look bigger?
Hang the Curtains as High as Possible
In order to make your window and the whole wall seem higher, put the curtain rod as high above the window as possible. Attaching the rail close to the ceiling tricks the eye into believing the wall is bigger. Thus, it visually expands the whole room.
Contents