Can You Use Back Tab Curtains With A Traverse Rod?

If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.

Can you hang any curtain on a traverse rod?

Ideally, no since traverse rods only work for pinch pleat curtains. Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.

Can I hang rod pocket curtains on a traverse rod?

The traverse rod provides drawstrings for opening and closing the curtains. Although the traverse rod system was made for pinch pleat curtains, you can adapt almost any rod pocket curtain to work on the rods.

Can you hang back tab curtains with rings?

Tabs on the back side of heavier curtains are designed to support the the fabric, which lets the curtains hang properly without sagging or bowing. Hanging heavy curtains with rings can cause the clips to pull, snag or tear the top edge of the fabric.

How does a traverse curtain rod work?

How do Traverse Curtain Rods Work? These mechanical rods operate by using small clips that move along a track that is embedded in the rod itself. This allows the curtain or drape to move smoothly along the rod and prevents any snagging that may happen with traditional curtain rods.

What is Pleater tape?

Best Pleat Pleater Tape is 4 inches wide and used in drapery headings to make creating pleats easy. Use with traverse pleater hooks to make triple pinch pleated curtains. Sew the tape to the back of the heading and side the ends of the hooks into the pockets on the tape to make perfect pleats.

Can you hang pinch pleat curtains on a pole?

They come as either double or triple pleated curtains, can be used on either a track system or on a rod/pole with rings both use the same type of hooks. PINCH PLEATED CURTAINS can hang on either a track or a rod with rings like in this pictures above.

What is a two way traverse rod?

Curtain rods with two operable layers of fabric are called double traverse rods.For a stronger double rod, visit our heavy-duty curtain rods section.

Can you use curtain hooks on rod pocket curtains?

Pinhooks can give you the custom-pleated look you want without the wear and tear on your wallet that nobody wants. The best news is that with a little ingenuity, pinhooks can be used with rod pocket curtains and a curtain rod, sparing you the expense of the more traditionally-used traverse rod.

How do you add back tabs to curtains?

Instructions

1. Step 1: Measure & cut the fabric. To determine the length to cut your main fabric, add 10” to your desired finished length.
2. Step 2: Make the tabs. Cut 4.5” x 6” pieces for the tabs.
3. Step 3: Pin fabric and lining.
4. Step 4: Sew the sides & bottom.
5. Step 5: Sew top & tabs.

What is pencil pleat curtains?

Pencil pleat curtains are a classic. Folds of fabric are tightly gathered to create a semi-cylindrical heading that resembles a line of pencils. From the close pleats of the header, the fabric tumbles freely to the floor. You can choose pencil pleat curtains for either poles or tracks.

How do you use Pleater tape on a hook?

Lay the pleater tape on the back of the top, fold under the ends, and pin. Make sure the pockets are on the bottom of the tape and facing out. Take note of the different color threads and sew around the edges of the tape on those lines. Take a hook and insert the ends of the prongs into the pockets.

What are curtains with a pull string called?

For larger windows, French doors, patio sliders and any other large opening, traverse curtain rods with a pull cord will allow you to open and close the curtains smoothly.

What are non grommet curtains called?

Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.

What is fullness for curtains?

So, if you are having curtains with a gathered valance, our experience has taught us that for the best results, you should aim for the curtains to have a fullness ratio of 2.0 – 2.5 times the rail width and the valance to have a fullness of around 2.5 – 3.0 times the rail width.

What is eyelet curtains?

Eyelet curtains, or ring top curtains, are contemporary headings that uses poles for mounting. The rings on the headings give out even soft pleats for your window treatments, unlike the usual ones that use a header tape. This means they do not need much material in the same way as a taped heading would.

What is the difference between pencil pleat and pinch pleat curtains?

Pinch pleat is a decorative heading for curtains, suitable for all fabrics. Pinch pleats use more fabric and are fuller than pencil pleats. The pleats are hand-sewn in and permanently fixed for more luxurious, tailored look.This will allow us to gather your curtains to the correct width.

Are metal curtain hooks better than plastic?

Metal Curtain Hooks
Our metal hooks are brass or zinc plated and are much stronger than plastic hooks for hanging curtains. Metal hooks are very strong, can be used in direct sunlight and are suitable for hanging heavy weight curtains.

Are pinch pleat curtains out of style?

Pleated panels are a classic style of drapery and so never really go out of fashion, although their popularity rises and falls with current trends. They look quite formal, so work best with formal or traditional decorating styles.Pinch pleat is the most common style.