How Do I Use Lg Smart Diagnosis?

https://www.youtube.com/watch?v=0BMW7iv0i04

https://www.youtube.com/watch?v=0BMW7iv0i04

How do I run smart diagnosis on my LG washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I know if my LG refrigerator is smart diagnosis?

Smart Diagnosis label is located at the top-right hinge of the unit.
You can run Smart Diagnosis^TM on your smartphone using the SmartThinQ app.

1. On your phone, press the SETTINGS button.
2. Press SMART DIAGNOSIS button.
3. Select the START SMART DIAGNOSIS option.

What is smart diagnosis app?

Smart Diagnosis is a feature available in the Support App useful for identifying and solving problems with your smartphone or tablet. This tool checks the general status of your device, locates issues and provides with simple and effective solutions.

How do I reset my LG Smart Diagnosis?

Press and hold the TEMP. CONTROL key for three seconds, while holding the phone mouthpiece to the icon or POWER button. Keep the phone in place until the tone transmission has finished. This takes about 10 seconds, and the display will count down the time.

What is thinq smart diagnosis?

Your smart refrigerator has the smart diagnosis feature which has the capability of transmitting and troubleshooting information through audible or Wi-Fi diagnosis.While holding the phone up, press the start button from the refrigerator display.

What is LG Smart Diagnosis microwave?

The smart diagnosis feature of the LG Microwave Oven helps you when you need an accurate diagnosis by an LG Electronics Service Centre when the product malfunctions or fails. This feature should only be used for contacting the service representative during product malfunction.

How do I put my LG refrigerator in diagnostic mode?

To put your LG refrigerator in Test Mode 1, locate the “Freezer Temp” function. But keep in mind that some units have a dedicated “TEST” button. If yours is one of them, press the button for the amount of time indicated instead. Then, press the “Express Freezing” and “Colder” choices at the same time.

How do I connect my LG refrigerator to WIFI?

the Wi-Fi button on the Refrigerator for 3 seconds until the wi-fi LED light starts to blink. network and completely register your Refrigerator. Once finished, your product will be listed on the main dashboard. Connect SmartThinQ® to the LG Network by following the on-screen prompts below.

What is LG Auto Smart Connect?

Auto Smart Connect™ is a technology that helps connect your refrigerator to home inverter. Once the refrigerator is connected to the home inverter, every time the power goes off it automatically takes inverter power to run the refrigerator without any manual supervision.

Are Huawei phones going to be banned?

By February 2020, Huawei had had nearly a year of living without the full ramifications of the ban. That same month, the US government issued a final 45-day reprieve, allowing the Huawei ban to take full and permanent effect by April 1, 2020.

What is smart ThinQ?

LG ThinQ (pronounced as “think-cue”; sometimes known as LG SmartThinQ) is a brand launched by LG Electronics in 2017, featuring products that are equipped with voice control and artificial intelligence technology.In February 2018, LG announced the LG V30S ThinQ, which is the first phone to have the “ThinQ” branding.

How do I run a diagnostic on my Huawei phone?

Open up the Support App on your device. On the Services tab, go to the Phones home page. Find and select Smart Diagnosis under Check-up & repair. Choose to run a full analysis or test a specific function of your device.

How do I reset the check filter on my LG dryer?

Here’s what you need to do: Unplug your machine. Press the ‘Start/Pause’ button for 8 – 10 seconds. Replug the machine immediately afterward and turn it on.

What is Le code on LG washer?

An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur.But if the error code displays on every washing cycle, the unit will require a repair service.

How do I fix error on my LG washing machine?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

What does LG Smart ThinQ do?

With just the touch of a button, your smartphone can help you control your LG smart appliances—from starting wash cycles to checking your refrigerator’s inventory—and even troubleshooting issues.Explore our newest collection of ThinQ^® appliances, including the kitchen, living room and laundry room.

How do I reset my LG refrigerator control panel?

How Can You Reset Your LG Refrigerator Control Panel? Hold the REFRIGERATOR AND ICE PLUS buttons simultaneously for five seconds with both the fridge doors open media. After 5 seconds of holding the buttons, the control panel will sound, and the heat settings will display to confirm that DEMO MODE has been deactivated.

How do I reset my LG smart inverter microwave?

Press the START/ENTER button for about 4 seconds to reset your LG microwave. The L indicator or lock icon should disappear from the screen. If the commands still don’t respond, try to restart the microwave by turning off the device for 2–3 minutes. Reconnect the microwave and try to use it.

Why is my refrigerator running but not cooling?

The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.

How do you connect a refrigerator to WiFi?

Connect your refrigerator.

1. On the App, choose the LCD Display option.
2. On the refrigerator, tap “WiFi” on the display and then tap “Turn On.” Make sure the WiFi icon is flashing on the LCD display.
3. The refrigerator display will show the WiFi Network and Password.