How Do I Adjust My Wyze Camera?

Sensitivity

1. In the Wyze app, tap Home then your Wyze Cam Outdoor.
2. Tap the Settings icon on the top right, then Detection Settings.
3. Move the slider left or right to lower or increase the sensitivity.
4. Your change will save automatically.

Where are camera settings on Wyze?

To set up your Wyze Cam or Wyze Cam Pan:

• In the Wyze app, tap Home, then tap + plus sign on the top left.
• Tap Add Device.
• Tap Cameras > Wyze Cam or Wyze Cam Pan.
• With your camera plugged into an outlet, tap Next in the app.
• Pull the base from your camera and single-press SETUP on the bottom of the camera.

What is detection distance on Wyze camera?

it is typically up to 20-25 feet for human. 2) After the camera wakes up, there is a software algorithm to analyze motion from the image.

Why isn’t my Wyze camera picking up motion?

Make sure event recording is enabled in the Wyze app. Tap on your camera, then the Settings gear on the top right. Tap Event Recording, then make sure the Detects Motion toggle is ON.

How do I control my Wyze camera?

Wyze Cam Pan gives you added controls with Pan, Tilt, and Zoom.
Motor Controls

1. In the Wyze app, tap on your Wyze Cam Pan.
2. Tap the Settings icon on the top right, then Advanced Settings > Motor Controls.
3. Drag the slider to set the speed. By default, the rotation speed is 5. 1 is the slowest speed, while 9 is the fastest.

How do I change the resolution on my WYZE camera?

Check to see if you have it set as HD/SD or 360p. You will see it on the top left. You can change the resolution by tapping it and a box will pop up.

How do I reset my WYZE camera to factory settings?

To factory reset your Wyze Cam Pan v2:
With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera.

How do I adjust the sensitivity on my WYZE outdoor camera?

To change the Sensitivity setting:

1. In the Wyze app, tap Home then your Wyze Cam Outdoor.
2. Tap the Settings icon on the top right, then Detection Settings.
3. Move the slider left or right to lower or increase the sensitivity.
4. Your change will save automatically.

How far can WYZE outdoor cam detect motion?

The maximum signal range for the Wyze Outdoor Camera from the Base Station is up to 300 Feet. However, this range is for a completely unobstructed signal and may vary depending on certain factors.

Why did WYZE remove person detection?

“In a nutshell: Person Detection will be temporarily removed from Wyze Cam beginning with a new firmware release planned for mid-January 2020, due to the unexpected termination of our agreement with our AI provider.26, 2019 would have to sign up for Cam Plus proper and pay a monthly fee.

How do you record more than 12 seconds on Wyze camera?

Go to the Wyze Cam Outdoor in the Wyze app. Go to Settings. Select Event Recording. Tap Recording Cooldown and Maximum Video Length to change their values.

How do you set up a Wyze motion sensor?

Follow these steps to add a sensor:

1. Open the Wyze app.
2. Check your camera’s firmware to make sure it’s up to date.
3. From the Home Tab tap the + plus sign on the top left.
4. Select Add Device.
5. Tap Sensors > Wyze Contact Sensor or Wyze Motion Sensor.
6. On the next screen, select the camera you want to connect your sensor to.

How do I get WYZE cam to record all the time?

Go to the home tab on the Wyze app, select the Camera, and then click on the HD, SD, or 360p setting on the top left. The Continuous Recording has a rolling feature to it. When the card is full, it will begin to overwrite the oldest footage and roll forward.

Is WYZE Cam always on?

There is a 5-minute “cooldown” period between the same type of event videos generated and stored on the cloud. This means that when there is continuous motion, the camera will only capture one 12-second event video every five minutes.

Can the Wyze camera move?

Wyze Cam Pan can follow motion automatically. Using the pan and tilt features, whenever motion is detected, the camera can move to track the motion until motion stops. This feature is only available on Wyze Cam Pan.

Can WYZE Cam turn on lights?

The Wyze Cam Outdoor has 8 LED infrared (IR) lights that turn when Night Vision is On. The camera also has an infrared light filter that drops in front of the camera lens to view the video feed using the infrared light. You may hear a clicking sound when Night Vision is turned on or off.

Can you rotate Wyze Cam 90 degrees?

The Wyze Cam Pan can be mounted sideways as well without any issues, but there is currently no rotation setting to make the image upright if it is mounted sideways”.

Why is my Wyze Cam so slow?

Troubleshooting Tips:
Toggle your camera’s resolution. All Wyze Cam devices have a quality setting on the top left of the live stream. Tap to choose between HD, SD, and 360p. If you’re on HD, try a lower setting as they both consume less bandwidth.

What is Auto on Wyze Cam?

Matthew. March 07, 2021 13:58. The Wyze app uses geofencing to unlock your Wyze Lock automatically when you’re home. Through a combination of Location Services and Bluetooth, Auto-Unlock uses a 2-step process to make sure you’re close enough for it to unlock reliably.

How do you Unbrick a WYZE camera?

Hold the setup button, plug in your USB cable, and keep holding the setup button for 12-15 seconds, then release the button. Wait for 3-4 minutes. The camera will reboot and change light status during this time.

How do I reset my WYZE camera to a new WiFi?

To perform a factory reset on your Wyze Plug:

1. Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
2. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.