Can You Shorten Roller Blinds?

Roller window shades are relatively easy to shorten. Unlike blinds that involve strings and pulleys, window shades are shortened by cutting the fabric where it attaches at the roller. When the shade is too long, you can shorten it to pull down to the window sill instead of beyond the sill.

How do you cut roller blinds too long?

Drag your utility knife along the straightedge to cut through the blinds. When you reach the top of your roller blinds, you can use scissors or a utility knife to cut the large lengthwise piece of fabric off. Don’t worry about removing the fabric at a perfect 90-degree angle or anything.

Is it easy to cut a roller blind to size?

Roller blinds are simple and easy to cut to size yourself. You simply need to take the measurements of your windows, compare them against your blinds and cut off the excess material. You Will Need: A pair of sharp scissors.

Does it matter if roller blinds are too long?

Roller blinds that are too long don’t make for a very pleasant or neat look and may ruin the aesthetics of the room and the window frame. The blinds that are too long also increase the safety risk, especially if you have kids or pets in the house. Long roller blinds are easier to reach for the kids and pets alike.

Can you cut blinds that are too long?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

How do you cut blinds that are too wide?

Cutting down the slats

1. Align the slats so that they are even.
2. Using a clamp or rubber bands, secure the slats together into position.
3. Wrap the slats with masking tape to prevent chipping.
4. Measure where you want to cut and mark a line with your pencil.
5. Lay them on the saw and line up the blade where you need to cut.

Can you shorten the width of vertical blinds?

How to shorten vertical blinds?You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place. Do not measure the length of the slats until you have fitted the track.

Can you cut blinds with a miter saw?

Put your blinds in your chop saw (miter saw), make sure you get it lined up exactly where you want it. Remember, when you cut, the saw blade will take away a teeny bit extra, so make sure you’ve got the blade lined up on the outside of your line.Aaaannd cut. You did it!

Can all blinds be cut down?

Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.

How much can you cut off blinds?

Don’t try to do it yourself — you’ll end up being dissatisfied. How do I cut a notch in my blinds to make room for a door latch? If you only need to trim a few of the slats shorter and the blind is mounted permanently onto a door, then I would say to use tin snips or sheers. Can I cut tape blinds that are 131 cm.

Can vinyl blinds be cut?

If the vanes on a vertical blind are too long they can be trimmed to the correct length. Because the vanes are made from a thin pvc vinyl material they are easy to cut.