How Do I Get Rid Of Reolink?

You may follow the steps below to remove the Reolink watermark when you live view your 5MP camera.

1. Launch Reolink App and log in to your camera.
2. Go to Device Settings -> Display and find the Watermark option.
3. Click the button to hide the watermark. You may also click the. button to display the watermark.

How do I delete a Reolink camera?

” to open “Settings” page and click “Delete” to remove the camera from Reolink App. Note: If you delete the camera in LAN while the camera is still connected, please disable “Add Devices Automatically” first and then delete the camera; otherwise, the camera will show up again after being deleted.

How do you delete a Reolink account?

Log in to your Reolink account at https://reolink.com/my-account/, and then go to Account Details -> Security page. Step 2. ?Click I Want to Delete, then enter the password in box 1, check box 2, and click Delete My Account to proceed.

What is Reolink watermark?

Watermark: Users may enable/disable the watermark (shows the Reolink logo) on the screen. Note: This option is only for the new hardware cameras. Privacy Mask: Users may set the privacy mask (up to 4 parts) for the camera to mask some areas.

How do I remove the Reolink from my Argus 2 SD card?

Note: Before uninstalling the SD card, please power off the camera first, in case it will damage the SD card. Step 2: Please use something sharp suck as the reset pin or a paperclip or your fingernail to push the SD to make it pop out.

How do I delete a channel in Reolink NVR?

Go to the menu of the NVR->Channel->Channel Management. Step 3. Click on the offline camera and tap the Delete button to delete it from the NVR. Then the channel this camera was taken is free now.

How do I stop sharing a Reolink camera?

How to Disable Remote Access/P2P on IP Cameras

1. Applies to: All Reolink IP cameras (except for battery-powered cameras).
2. Go to Device Settings-> Network-> Advanced page and disable UID in this page.
3. Go to Device Settings->Network->Advanced-> NTP Setup page, disable NTP Auto-Synchronize option.

Can you remove Reolink watermark?

Go to Device Settings ->Camera-> Display page, then uncheck the Watermark box.

How do I get rid of Reolink logo?

You may follow the steps below to remove the Reolink watermark when you live view your 5MP camera.

1. Launch Reolink App and log in to your camera.
2. Go to Device Settings >> Display and find the Watermark option.
3. Click the button to hide the watermark. You may also click the. button to display the watermark.

How do I change the name of my Reolink camera?

On Reolink Client
Right-click the mouse and choose Rename, change the name of camera. Or go to camera Settings>Camera>Info, change the Camera Name.

How do you remove a micro SD card?

Open the itty-bitty hatch covering the MicroSD card slot. Use your fingernail to press the MicroSD card inward a tad. The MicroSD card is spring-loaded, so pressing it in eventually pops it outward. Pinch the MicroSD card between your fingers and remove it completely.

How do I format a Reolink SD card?

Step 1: Launch Reolink App, then click the button in the picture below to go to the Device Settings-> Device Information-> Storage page. Step 2: Select the SD card, then tap on Format to format the SD card. Note: Please wait for a few minutes for the camera to reboot after tapping on the Format.

Where does SD card go on Reolink camera?

Insert your SD Card in the SD card slot on the right side of the camera. Use the Reset needle to push the SD card in until you feel it is locked.

How do I block security cameras?

Also, you can close the curtain or shade on the window to block security cameras. The privacy fence, bamboo curtains and yard shade sails are also effective tools to disable CCTV security cameras. Additionally, you may put up cheap posts with cloth flags along the property line to block the CCTV security camera’ view.

Can Reolink cameras be hacked?

Reolink security IP cameras feature advanced encryption, like the SSL encryption, WPA2, and AES encryption, making sure the live surveillance streams unable to be accessed by hackers.

Are Reolink cameras secure?

25, 2016 /PRNewswire/ — Reolink provides multi-level security features to keep video surveillance footage from prying eyes and ensure the security products are indeed secure. The major enabled security settings of Reolink IP cameras and systems are: SSL encryption, WPA2-AES encryption, and SSL-TLS enabled.

How do I rearrange the cameras on my Reolink app?

If you want to arrange the display order of cameras via Reolink Client, you can select the camera that you want to change its display order, then long-press the mouse cursor and drag the camera to the channel you want.

Does removing SD card delete everything?

The SD card will unmount, and a notification will appear saying, “SD card safe to remove. You can safely remove SD card.” You can now pull it out of your phone or tablet and not risk losing any data.

How do you remove an SD card without the tool?

Using a paper clip, thumbtack, or a push pin
For those who don’t have a SIM tray ejector on hand, the humble paper clip is one of the best alternatives. Just bend one of its ends and you’re good to go! But make sure you use a paper clip thin enough to fit into the tray’s hole.

Is it safe to remove SD card when phone is off?

Android supports hot swapping of external storage. However, since there is no way to fully ascertain visibly at what stage of shutdown process the external storage is unmounted, it should be removed only when the phone has powered off.