Where Is Qr Code In Hikvision Nvr?

Notes: Normally, the QR code is printed on the label, which is on the back cover of the device.

How do I get the QR code on my Hikvision camera?

Add a Device by Scanning Device QR Code

1. On the device list page, tap > Scan QR Code to enter the Scan QR Code page.
2. Scan the QR code.
3. Optional: Perform the following operations if the following situations occur.
4. Tap Add on the Result page.
5. Enter the device verification code.

Where is the QR code on my DVR?

This sticker is generally located on the side or base of a camera, or on the bottom of a DVR / NVR recorder. A QR code is a machine-readable optical label that contains information about the item to which it is attached.

How do I get verification code for Hikvision NVR?

Change Device’s Verification Code

1. Enter the Settings page of the device.
2. Tap Change Verification Code, and then tap Edit on the pop-up Window to enter the Change Verification Code page.
3. Enter the old verification code, and then tap Next.
4. Create a new verification code, and then confirm it.

How do I connect my phone to Hikvision NVR?

How to Use Hik-Connect on Mobile for both iOS and Android?

1. Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)
2. Open the app.
3. Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.

How do you enable HIK-connect on NVR?

Enabling Hik-Connect Service on Web
Input the device IP address and press the Enter key on your keyboard. Input the device user name and the device password to login. Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page. Check Enable.

How do I scan QR codes?

How to Scan a QR code on an Android Phone

1. Open the Camera app on your Android phone. You can open the camera app by swiping up from the bottom of your screen.
2. Then point your Android phone at the QR code to scan it.
3. Finally, tap the pop-up banner.

How can I watch Hikvision CCTV on mobile?

The steps to access a Hikvision DVR from a mobile are very simple. Just install the iVMS-4500 App in the mobile phone, click the Hik-connect button to create an account and finally add the DVR by pointing the mobile camera to the DVR QR Code. This process is very simple and work for Hikvision remote view.

How do I add a device to HIK-connect?

Add a Device by Hik-Connect Domain

1. On the device list page, tap > Manual Adding to enter the Add Device page.
2. Select Hik-Connect Domain as the adding type.
3. Enter the device serial No.
4. Tap to search the device.
5. Tap Add on the Result page.
6. Enter the device verification code.
7. Optional: Tap Configure DDNS to configure DDNS.

How do I create a verification code?

Set up Google Authenticator

1. On your device, go to your Google Account.
2. At the top, in the navigation panel, tap Security.
3. Under “Signing in to Google,” tap 2-Step Verification.
4. In the “Add more second steps to verify it’s you” section, under “Authenticator app,” tap Set up.
5. Follow the on-screen steps.

What is security code in Hikvision DVR?

From there we can provide you with a security code to enter which will restore your password to the Default “12345”. Once you have entered the code, click confirm to complete the procedure. To provide you with a security code you will need to Copy and Paste the full serial number from SADP.

Where is my HIK connect encryption password?

Set Video and Image Encryption

1. Enter the Settings page. On the device list page, if the page is in the list mode, swipe the device name to left and tap .
2. Set the Video and Image Encryption switch to ON to enable the function.
3. Optional: Change the encryption password (device verification code). Tap Change Password.

How do I access Hikvision NVR remotely?

Go the following menu location: Configuration –> Network –> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.

Why is my HIK-connect not working?

Make sure your phone has connected to a Wi-Fi network.Make sure the device is powered on and then tap OK on the Initialize Device page to enter the Network Connection page. Note: If you have set the device before, you should reset the device. Tap How to Reset and follow the instructions to reset your device.

How do I enable HIK-connect?

Go to Configuration > Network > Platform Access and enable Hik-Connect service by placing a check in the Enable checkbox. c. For the first time to use, users need to create a verification code.

How can I reset my Hikvision NVR password?

1. On device. 1) Click Forget Password on login menu. 2) Choose Verify by Hik-Connect. 3) Into the following page?
2. On app. 1) Run Hik-Connect app. 2) Tap More – Reset Device Password.
3. On device. 1) Enter the verification code obtained from app in the box below. 2) Click OK, then the system allows to create new password.

How do I get my HIK-connect back online?

1. Open the Main Menu by clicking the Cog icon and then browse to Network > TCP/IP.
2. Set your Preferred DNS Server so that it is the same as your IPv4 Default Gateway and set your Alternate DNS Server to 8.8. 8.8 and press Apply.
3. To check if this has worked browse to Network > Advanced > Platform Access.

How do I scan a QR code without an app?

1. Google Screen Search: Google Screen Search allows consumers to scan QR Codes without an app instantly. All one has to do is point their camera at the QR Code, long-press the Home button and click on ‘What’s on my screen? ‘ The QR Code link will be available for consumers to open.

How do I manually read a QR code?

How to decode QR codes without scanning them

1. Install QRreader from the Chrome Store.
2. When you see a QR code on a Web page, just right-click it and select “Read QR code from image” from the context menu. Step 2: Right-click the QR code.
3. If the code just contains a link, a new tab will open with that link.

How can I add IP camera to NVR Hikvision?

1, Connect your camera to the POE port of the NVR. Assume you connect your camera to the POE port 2. 2, Go to Camera Management->Camera->IP Camera, highlight the second channel (D2) and click Edit. 3, Select Adding Method as Plug-and-Play, click OK.

How do I find my verification code?

Get a code from Settings on your trusted device

1. Go to Settings > [your name].
2. Tap Password & Security > Get Verification Code.