What Is The Door Tongue Called?

Latch. The beveled “tongue” spring mechanism that extends from the edge of the door into the door jamb to hold the door shut when closed.

What is the thing called that the door latch goes into?

The latch bore, also known as the edge bore, is the hole drilled from the side of the door into the cross bore to allow the latch of the lock to be installed and to accommodate the sliding of the deadbolt. The diameter of the latch bore is generally 1” to accommodate bolts from either mechanical or electronic locksets.

What is the door notch called?

A knob is generally a round shape which is used to grab with your hand and open a door. Knobs are made of brass, zinc die cast or other products. The latch is the mechanism that slides into the enge of the door and retracts or protrudes with the turn of the door knob.

What are the parts of a door lock called?

The main parts of a door lock are the cylinder, bolt, box and strike plate. It’s useful for any DIY-er to know how things around the home operate.

What are the parts of a deadbolt called?

What are the Parts of a Deadbolt?

• Thumb-latch / Thumbturn. The thumb-latch (or thumbturn) is the part of your deadbolt inside your home that you use to lock and unlock your deadbolt.
• Deadbolt. The deadbolt is the piece of the lock that secures your door shut.
• Turnpiece / Tailpiece.
• Keyhole.

What is a door cylinder?

The cylinder is the locking mechanism of an entry door set. It may be integrated with a the deadbolt of a mortise lock or mounted independently as part of a separate deadbolt.One can secure the door from inside, as well as exit the house without a key, making this the most popular option.

What is a Latchbolt?

Latchbolts – These latches feature a spring-loaded bolt that is angled off at the top edge.Once the bolt passes a certain point, it will fully extend and quickly lock into the strike plate due to the pressure being released from the spring, securing the door and holding it closed.

What is the metal part of a door called?

The strike plate is placed on the door jamb where the hole for the bolt of the door and the bolt meet. It is a small metal plate that is screwed to the door jamb.

What is a passage door knob?

Passage door knobs are similar to dummy door knobs. They don’t lock but are used to open doors and go between rooms. Passage door knobs are ideal for interior hallways, closets and other rooms that don’t need privacy locks. They’re also called unkeyed knobs.

What are the different types of door handles?

There are three main types of door handles: lever handles, pull handles and door knobs.

What are jambs on doors?

A jamb is the flat surface that runs vertically up either side of the door frame. The door jamb is vital to the running of the door. This is where the hinges are placed to hang the door, as well as the striker plate on the opposite door jamb which helps you to open, close and lock your door.

What is a drive in faceplate?

Round drive-in faceplate: This is an optional faceplate that may replace the rectangular faceplate already attached to the latch if your door calls for it. Strike plate: The strike plate is the metal plate that will be affixed to the door frame.

Are all door cylinders the same?

There are two types of cylinders; both types have different applications and purpose. The Standard core cylinders have a fixed middle (the key hole) that requires the removal of the entire cylinder for repair or re-keying.

What is a dead bolt lock?

Deadbolt locks: The deadbolt lock has a bolt that must be activated by a key or. thumb turn. It offers good security because it is not spring activated and cannot be. “jimmied” opened with a knife blade or credit card.

What is a lock verb?

lock verb (FASTEN)
to fasten something with a key, or to be fastened with a key:If you shut the door it will lock automatically.

What is spring bolt lock?

A dead bolt, deadbolt or dead lock is a locking mechanism distinct from a spring bolt lock because a deadbolt can be opened only by a key or handle. The more common spring bolt lock uses a spring to hold the bolt in place, allowing retraction by applying force to the bolt itself.

What is a French door?

French door (n.): A door, usually one pair, of light construction with glass panes extending for most of its length. They also can be referred to as French windows.

What is a door flange?

This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.

What is a door hinge?

Hinges are the hardware used to attach a door to its frame, and are the pivot point for opening and closing the door. Whether you are replacing an old door or hanging a new one, hinges are an important part of the structure.

What is a door handle called?

A door handle or doorknob is a handle used to open or close a door.The most common types of door handle are the lever handle and the doorknob. Door handles can be made out of a wide variety of materials.

What are closet door knobs called?

Hall and closet door hardware refers to non-locking knobs and levers, sometimes called Passage hardware. They are ideal for rooms and doors where locking is not needed, such as a closet.