Locksmith are safe specialist in opening all major safes and especially we can Open Sentry Safes with keypad, combination lock or electronic lock. Sentry Safes is the largest manufacturer of Safes in North America.Locksmith also can open, service or repair most safes.
How much does it cost to open a Sentry safe?
Many locksmiths have turned down opening Sentry Safes because of lack of knowledge, education or information. Locksmiths typically can charge $150-$250+ to open Sentry Safes and more for after hours emergency service.
What do you do if you can’t open a Sentry safe?
Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.
Are Sentry Safes easy to break into?
Sentry Safes are supposed to be fireproof and burglar-proof. So breaking into one should be difficult after all.Contact Sentry Safe for assistance or call them at 800-828-1438.
Can you pick a sentry safe lock?
If you lost your SentrySafe’s key or code, there are a few ways to pick the lock. If your safe has a digital lock with a number keypad, you can pick it in seconds with little effort.If you need to pick a flat keyhole lock, you can use a metal nail file, flat-head screwdriver, or straightened paperclip.
How do I contact Sentry Safe?
The SentrySafe Customer Care line is available from 7:30 AM CST 5:00 PM CST Monday thru Friday. Please call us at 800-828-1438. If you’d like to e-mail us your comments, please fill out the fields below and include the model number of your safe.
How do you open a Sentry safe with a key?
How to Open a Sentry Safe With a Key
- Place your Sentry safe on a sturdy surface. Make sure the safe is facing you. The safes can be bulky and a little heavy.
- Insert the key in the silver lock, which is located under the lid in the middle of the safe.
- Turn the key to the unlock position. Lift the lid of the safe.
How do you open a Sentry Safe without the key?
Turn the dial counter clock wise and pass the second number of the combination once. While still turing the dial clockwise, stop on the second number the second time you reach it. Turn counter clockwise once more and stop on the final number the first time you see it. From there it should be open.
How do you open a Sentry Safe with a dead battery and no key?
There is a small opening on the front number panel of safe. Use a small hex screwdriver or pin to insert into opening. It will open up the front panel (slide panel to right to take off) showing you 4 AA batteries. Just replace and close panel.
Can you open a safe with a magnet?
All you have to do to open up the safe is take your trusty sock and magnet device, then attach it to the safe.There isn’t too much surface area to these safes, and it should be on the front door, so just slide the magnet around using the sock until you’re able to open the safe.
What is the default code for Sentry safe?
go
Ready? Here we go: Before we begin, locate the 5-digit factory code located on the back of your owner’s manual, and enter the code to open the door. This safe is set to “62044.” To program the primary-user code, press the [P] button and enter the 5-digit factory code on the electronic keypad.
What kind of magnet opens safe?
Open Electronic Sentry Safe in Seconds with Rare Earth Magnet. To purhcase the same Rare Earth Magnet in the video go to Mr. Locksmith Training. Recommended by Terry Whin-Yates.
Contents