How Do You Reset A Voopoo Argus Pro?

Argus Pro – Functions

1. Turn the device on – 5 Clicks of the fire button.
2. Adjust Wattage – Press/hold the + or – buttons.
3. Lock Device – Press and hold the fire button and + button.
4. Reset Puff Counter – Press and hold the fire button and – button.
5. Change Modes – Press the fire button 3 times quickly.

https://www.youtube.com/watch?v=p0EznJSshwc

How do I reset my Argus?

How to Reset Argus PT

1. Turn ON the power button to power the camera.
2. Rotate the lens to find the reset hole. And then insert the reset needle into the reset hole of your camera.
3. Press and hold for several seconds until you hear the prompt “Factory reset succeeded.

How do I unlock my Argus vape?

Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device.

What are the different modes on Voopoo Argus Pro?

When it comes to features, the Argus Pro has ‘Smart Mode’ and ‘RBA Mode,’ with the ability to set either Draw activation and Button firing in both modes. The ‘Smart’ mode will detect the coil, select the recommended wattage, and restrict you from going above the range for that coil.

Where is the reset button on Reolink Argus PT?

There’s a reset hole on the left side. Just insert reset the needle into the hole to press and hold the internal button. After a few seconds, you will hear the reset notification message… While pushing the reset button with the needle you can hear a click that indicates you’ve pressed correctly.

How do I reset my Argus 2 Reolink camera?

How to Manually Reboot Argus Series Cameras via Reolink App

1. Step 1: Please launch Reolink APP, locate your Argus Series Camera and click “Setting”
2. Step 2: slide down your screen and click “Advanced” in your settings.
3. Step 3: Click “Reboot” at the bottom of the screen.

What does P mean on Voopoo?

Three clicks of the power button scroll between the three firing modes (P for manual, AUTO for draw-activated and P&A for both). Press + or – to adjust the wattage. Pressing + and – together enters the PUFF interface.

Is Voopoo Argus pro good?

The Argus Pro is a well-crafted, quality device which feels nice in the hand and performs superbly. It’s easy to operate, it fires quickly, the battery lasts a good length of time and it charges quickly. I’m a big fan of the styling, and the flavour is superb, in particular with the 0.15ohm coil.

What does A&P mean on Argus Pro?

A&P is auto fire, meaning you can either use the fire button or just take a draw and it will auto fire. P only is that you have to press the fire button to activate.

How do I reset Reolink go?

You may follow the steps below to reboot your camera or NVR via Reolink App.

1. Launch your Reolink App, go to Device Settings-> Advance page.
2. Find the Reboot button and click it, and then click OK to reboot it.

How do I reset my Argus 2 camera?

For the Argus 2 and Argus Pro, you may unplug the battery and plug back, then the camera will be rebooted.

How do I reset my Argus eco Reolink?

How to Reset Reolink Argus Eco

1. Power ON the camera by turning on the power button.
2. Insert the reset needle into the reset hole of your camera.
3. Press and hold for several seconds until you hear the prompt “Factory reset succeeded.

What happens when you reboot a Reolink camera?

After reset, the old password will be removed. Now you can log in with the default username and password. Note: If you restore the cameras via Reolink software, all the settings of the cameras will be deleted. For WiFi cameras (except the battery-powered ones), the WiFi configuration won’t be lost after resetting.

How do I reset my Argus Pro puff?

Mode of Operation

1. Fire Button Pressed – Start Vaping.
2. – Button Pressed – Wattage Down.
3. + Button Pressed – Wattage Up.
4. Fire Button Pressed 5 Times – Power On/Off.
5. Fire Button Pressed 3 Times – Switches Between S/R Modes.
6. Fire and – Button – Puff Counter Reset/Data Clear.
7. Fire and + Button – Device Lock/Unlocked.

Does the VooPoo Argus Pro need a battery?

The PRO version of the VooPoo Argus has a built-in 3000mAh battery, otherwise its similar to the Argus X, which has a replaceable cell. Built-in 3000mAh battery delivering up to 80w.

How do I change Voopoo mode?

Customization Mode: Press up and down buttons simultaneously for 1.5 Seconds, the device will go to the function menu Interface. Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode Interface.

How do I change my Voopoo too settings?

To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the “W” wattage icon flashing. The wattage can be adjusted between a range from 5W minimum to 80W.

Why is my vape locked?

When You First Receive Your Vape Pen, It Will Be Locked
Generally, when you first buy your vape pen, it will be in the locked position. This is for safety reasons as well as giving protection to the battery. However, you do need to check whether it is on or off when you first open the packaging.

How long does Voopoo Argus Pro battery last?

In continuous trigger and one-time full charge, the batteries will last about 15 hours in day-mode or 9 hours with IR lights on at night mode.

How do you set up Argus Pro vape?

Argus Pro – Functions

1. Turn the device on – 5 Clicks of the fire button.
2. Adjust Wattage – Press/hold the + or – buttons.
3. Lock Device – Press and hold the fire button and + button.
4. Reset Puff Counter – Press and hold the fire button and – button.
5. Change Modes – Press the fire button 3 times quickly.

How do I fix the atomizer on Voopoo?

If your coil needs changing for a new one, it can cause this error. So if you think it is time for a new one try putting a new coil in your tank. Taking care to fully prime your coil before use. This should get rid of the ‘check atomizer’ message.