How Do I Factory Reset My Hikvision Nvr?

How do I reset my NVR to factory settings?

To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.

How can I reset my Hikvision DVR without password?

1. On device. 1) Click Forget Password on login menu. 2) Choose Verify by Hik-Connect. 3) Into the following page?
2. On app. 1) Run Hik-Connect app. 2) Tap More – Reset Device Password.
3. On device. 1) Enter the verification code obtained from app in the box below. 2) Click OK, then the system allows to create new password.

How do I reset my NVR admin password?

Reset Password of DVR/NVR by Scanning QR Code

1. Tap More > Reset Device Password to enter the Reset Device Password page.
2. Scan the QR code on the local GUI of the DVR or NVR.
3. Go to the device’s local GUI.
4. Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.

What is the Hikvision NVR default password?

12345
Hikvision default password

User Name	Password
admin	12345

What is my HIKVision username and password?

Forgot Password

1. On the Hik-Connect login page, tap Forgot Password.
2. Tap Reset by User Name/Email Address or Reset by Mobile Phone Number.
3. Input the user name or the email address on the Verify Account page if you select Reset by User Name or Email Address.
4. Tap Next.
5. Input the verification code and tap Next.

Where is the QR code on HIKVision NVR?

Notes: Normally, the QR code is printed on the label, which is on the back cover of the device.

How do I get my HIK-connect verification code?

Go to Configuration->Network->Advanced Settings->Platform Access.

1. Log in to the Control Client.
2. Go to Remote Configuration->Network->Hik-Connect.
3. Click the device to view its verification code.

How do I restart NVR?

Launch your NVR with a monitor attached, go to Menu -> Shut down page, then click Reboot and OK to reboot the NVR.

How do I factory reset my Hikvision IP camera?

How to manually factory reset a camera.

1. Press and hold down the reset button for 30 seconds while the camera is on then power it down.
2. Continue to hold the reset button down for a second 30 seconds then power it back up.
3. Continue to hold the reset button down for a final 30 seconds then let go of the button.

How do I factory reset Q See NVR?

Press and hold the reset button for 15 seconds in order to reset the camera to its original factory settings. Q-See is always here to answer your questions and take your valued suggestions.

How can I change my HIKVision DVR password?

Steps to change default password on Hikvision DVR/NVR

1. Go to Main Menu >> Configuration >> User.
2. Select the desired user and click ‘Edit’ icon.
3. Input the old password.
4. Check change password box.
5. Input the new password (complex password is highly recommended)
6. Confirm the new password.

What is the default IP address for Hikvision NVR?

The address is 192.168. 1.1.

How do I find my NVR password?

Method: Simply input the local IP address of your NVR, then click “Reset”. The reset will take more than 20 seconds to complete, then you need to manually reboot the NVR. The username and password will reset to default (user: admin; password: blank/empty). 4.

How do I reset my UVC NVR?

Hardware Overview
Resets the UniFi Video NVR to factory defaults. The UniFi Video NVR must be fully booted and running. Press and hold the Reset button for about 10 seconds. The UniFi Video NVR will automatically reboot with default settings.

What is DVR default password?

DVR default password list (2020)

DVR	USER	PASSWORD
Hikvision	admin	12345
Honeywell	Admin	123456
Ivio	admin
Multitoc	admin	88888888

How do I change my IP on Hikvision NVR?

1, Connect your camera to the POE port of the switch. Connect your NVR to the same switch. 2, Go to Camera Management->Camera->IP Camera, select any channel and click Edit. 3, Select Manual, type in the IP Camera Address & User Name & Admin Password, click OK.

How do I access Hikvision NVR remotely?

Go the following menu location: Configuration –> Network –> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.

How do I get a QR code for iVMS 4500?

Note: The QR code can be obtained via iVMS-4200 client software, iVMS-4500 mobile client software, or the local menu of the device.

Where is the QR code on a DVR?

This sticker is generally located on the side or base of a camera, or on the bottom of a DVR / NVR recorder. A QR code is a machine-readable optical label that contains information about the item to which it is attached.

What is the 6 digit verification code?

The six-digit verification code of WhatsApp is also known as verification OTP (One Time Password). It is a random combination of six numbers that are temporarily generated and sent via SMS or call to authenticate a WhatsApp account at the time of setup.