woodruff cutter.
If you need to mate a part on a shaft, you need a key cutter. A key cutter, also known as a keyseat cutter, keyway cutter, or woodruff cutter, is a versatile tool that can be used to cut several different types of keyways.
Key Cutter Speeds and Feeds.
| Material | Grades | SFM |
|---|---|---|
| Martensitic | 403, 410,416, 420, 430, 431, 440 | 110 |
Which cutter is used in keyway milling?
Woodruff cutter
Woodruff cutters are used to cut the keyway for a woodruff key.
What is keyway milling?
Keyway milling is the cutting of a keyway along the axis of the cylindrical surface of shafts or other items. Our portable Keyway milling machines allow us to cut new or re-cut worn keyways in shafts as little as 3/4 inch (19mm) up to 24 inches (610mm) outside diameter.
What is feather key?
Feather Keys are drive keys that transmit torque from a shaft to a driven component.It is not necessary to have a set screw hold the key in position.
How do you remove a keyway pulley?
Use the socket wrench to tighten the screw at the end of the gear puller until the screw touches the pulley shaft. Continue turning until the pulley can slide free. You can strike the exposed end of the gear puller with a hammer to try to loosen the pulley.
What is a broach tool?
Broaching is a machining process that uses a toothed tool, called a broach, to remove material.Commonly machined surfaces include circular and non-circular holes, splines, keyways, and flat surfaces. Typical workpieces include small to medium-sized castings, forgings, screw machine parts, and stampings.
What is a machine keyway?
Keys and Keyways. A key is a common machine element found in rotating equipment used to connect a rotating component to a shaft. The key prevents movement and relative rotation between the component and the shaft and may also enable torque transmission.
How do you measure a keyway?
Metric keyways are dimensioned by width and depth as measured from the radius of the shaft to the center of the keyway. See dimensions W and h in Figure 1. Unless otherwise specified, the shaft keyway is assumed to be standard.
How can a keyway be machined on a shaft?
A method of machining keyways in shafts comprises the steps of aligning a central line of a spindle of a machine tool with a center line of a shaft to be machined, preliminarily machining a keyway in the shaft with keyway mill arranged on the spindle so as to retain a symmetrical allowance for a finishing machining of
What does a keyway mean?
Definition of keyway
1 : a groove or channel for a key. 2 : the aperture for the key in a lock having a flat metal key.
What is saddle key?
Definition of saddle key
: a key for securing a member to a machine shaft that fits into a keyway in the secured member and is concave to grip the shaft by friction compare flat key, sunk key.
What is Kennedy key?
The Kennedy key consists of two square keys. The hub is bored off the centre and the two keys force the hub and the shaft to a concentric position. Kennedy key is used for heavy duty applications.
What is tangent key?
Tangent Keys
Tangent keys are used in heavy-duty equipment.These pair of keys are placed right angles to each other and tangent to the surface of the shaft as shown in the fig. each key will withstand the torsion in one direction only.
What is a taper key?
The tapered key is tapered only on the side that engages the hub. The keyway in the hub has a taper that matches that of the tapered key.The purpose of the taper is to secure the key itself, as well as, to firmly engage the shaft to the hub without the need for a set screw.
What is keyway in construction?
a groove in a shaft, the hub of a wheel, etc., for receiving part of a key holding it to another part. a slot in a lock for receiving and guiding the key. (in poured-concrete construction) a longitudinal groove in a footing, or in a pour that has set, providing a key for newly poured concrete.
What types of keys are there?
Types of Keys
- Skeleton Key. Also known as a passkey, a skeleton key is a simple key with a cylindrical shaft and a single toothed end, which is used to open warded locks.
- Abloy Key. The Abloy key is used on disc tumbler locks.
- Dimple Key.
- Paracentric Key.
- Tubular Key.
- Keycard.
How many types of shafts are there?
Shafts are mainly classified into two types: Transmission shafts are used to transmit power between the source and the machine absorbing power. e.g., countershafts, line shafts, and all factory shafts. Machine shafts are an integral part of the machine itself.
What type of cutter would you use to cut a blind key seat?
When a specialized cutter is used to cut the Keyseat, it’s a Keyseat Cutter. A Woodruff Cutter is a Keyseat Cutter. There are several kinds of Keys in common use.
Contents