How Do I Set Up Luma Link?

How to Setup Luma Link on iPhone

1. Download the Luma Surveillance app for iPhone and open it.
2. Log in with the username and password you were provided.
3. Tap the Home button.
4. Tap the three lines (hamburger menu) in the upper left corner.
5. Tap Live View.
6. In the camera list, select the cameras you wish to view.
7. Tap Start Live View.

How do you use Luma Link?

Once you’ve downloaded the latest Luma firmware, you can start using LumaLink in three easy steps:

1. Add the recorder to your OvrC account, under your client’s location.
2. Create an OvrC Home account for that client.
3. Log in to LumaLink using either OvrC or your client’s OvrC Home account.

How do I set up Luma app?

1) Tap on the app’s icon ( ) to run it. Tap Devices on the app’s home screen. 2) On the screen shown below, tap the icon at the top to add a Luma device. 3) Enter the information and tap the button.

How do I access Luma NVR?

Connect your PC to the network and run the Luma Utility. It searches the local network for all Luma Surveillance devices. If your NVR does not appear, ensure that the network connections are secure and that the unit is powered up, then click the Refresh button. Click on the entry for your NVR to view its details.

How do I download Luma utility?

Visit your product page at SnapAV.com and download the Luma Utility installer. Once it has downloaded, double-click on the Luma Utility icon to run the installer. You can click through and accept the defaults. Run the Luma Utility.

How do I reset my Luma NVR?

The simplest solution is to perform a factory reset on each camera. To reset the camera, first power it off. Then press and hold the reset button while powering up the camera. Hold down the reset button for at least 30 seconds during the power-up cycle.

Why is my Luma offline?

Luma devices are periodically updated with new firmware.Please note that during a firmware update, the Luma will also require a network/device reset and as such the Luma will be offline for the same period of time. This is approximately 2-3 minutes.

Do Luma cameras have audio?

This button lets you hear the audio from that camera, if the camera has an associated microphone. ? On the web interface, when the audio button is first clicked, a volume slider appears. While audio is active, hovering your mouse over the audio icon makes the volume slider reappear.

Is the Luma app free?

Luma App. Discover the ins and outs of the Luma app including how to access remote playback and view your live feed with this convenient manual. The free app is available for both Android and iOS.

Are Luma cameras Onvif compatible?

ONVIF/Third-Party Camera Compatibility.Plug and play capability lets these cameras work seamlessly with Luma NVRs, as well as popular control systems.

Are Luma surveillance cameras good?

Luma Surveillance™ Cameras and Recorders are Secure
Safety and security are #1 when it comes to where your surveillance video footage is stored. With Luma, you aren’t accessing your recordings in the cloud. Recorders store everything on hard drives within your home to ensure secure and easy access.

How do I delete a luma node?

From the Main page of the app, each Luma is listed.
Tap on the individual Luma.

1. The information pane for that Luma appears.
2. Tap the three dot menu at the top right and select Delete.
3. A confirmation to delete the Luma appears. Press Delete from Network.

How do I update Luma WiFi firmware?

Log in, select the customer’s account, and look for the update icon on the right side of the device list. Tap on it and a pop-up opens to show you the current firmware, the new firmware to be updated and the release notes that summarize the improvements. Select continue and the process begins.

How do I reset my Luma WiFi?

Select the specific Luma you wish to reboot from the WiFi home page.

1. Select the menu in the top right (3-Dots)
2. Select ‘Reboot’ from the options button in the top right.
3. iOS Reboot Instructions: Log into the App.
4. Select the Reboot Option:
5. Confirm Reboot:
6. An additional option is a physical reset of the device.

Why is my Luma solid blue?

During setup, your Luma should spin blue for up to 3 minutes and then turn solid blue. This is a normal step in the initial setup process; however if the Luma continues to spin blue and does not turn solid blue, we suggest you factory reset your Luma.

How do I stop Luma NVR from beeping?

To disable warnings:

1. Right-click on the Live View to access the Quick Menu.
2. Click Main Menu and then click the Setting icon ( ).
3. Click Event > Warning.
4. Click the Network tab.
5. In the Event Type drop-down, select from the available alerts.
6. Uncheck the box next to Buzzer and click Apply.

Where are Luma cameras manufactured?

Charlotte, North Carolina
Integrators can learn more about Luma’s 510 Series recorders at snapav.com/luma. Established in 2005 and based in Charlotte, North Carolina, SnapAV is a manufacturer and exclusive source of more than 2,000 installation-friendly audio, video and CCTV products for residential and commercial A/V integrators.

Where is the serial number on Luma NVR?

The serial number and model number are generally found on a sticker on the top or bottom of the DVR / NVR.

Does LumaFusion export to MP4?

mts files) are not supported by LumaFusion and would require transcoding to MP4 or MOV using the H. 264 or H. 265 (HEVC) codec. LumaFusion supports export in H.

Does LumaFusion save automatically?

LumaFusion projects don’t auto-save to iCloud. They’re kept locally on your device. If your iCloud storage is full, you might want to check how your media is being stored and free up some space on the device.

How much does LumaFusion cost?

Compared to other mobile editing apps, LumaFusion’s depth of editing options is unmatched. Putting together a multitrack edit using the main editing interface is straightforward, and you can then fine-tune your video using detailed color, effects, audio, and keyframing options. The app costs a one-off fee of $29.99.