Your Hive View or Hive View Outdoor requires a minimum of 1.5Mbps. If you have low bandwidth on your network this could impact either the performance of the camera or the performance of other devices connected to the same network.
Does the Hive box interfere with Wi-Fi?
Your hub is the part of your Hive ecosystem that connects your thermostat to the internet. If it loses connection to the internet, or if the thermostat loses connection to the hub, you won’t be able to control your thermostat remotely.
What is interfering with my Wi-Fi?
The most common source of Wi-Fi interference is other Wi-Fi signals outside of the network operator’s control. This can happen when a signal is using the same channel. Co-channel interference may also result when access points are placed too close together and are configured with too high of an output power.
What affects Wi-Fi signal strength?
The biggests factors which reduce Wi-Fi performance are the effect distance and internal walls have on signal strength.Even though the data transmitted over Wi-Fi is digital, the actual signal uses analogue radio waves. These are suspectible to intereference, much in the same way as the radio in your car.
Does Hive use a lot of data?
Push notifications received as a result of your Hive Sensor triggering will use only a small amount of data, 4kb at the most.
How does Hive connect to WiFi?
Go to the Hive app and tap on the Hive Leak Sensor. The settings icon on the top right is where you can change the wi-fi on the product page. You will be led through the process of connecting to your new network.
Why does my Hive hub keep going offline?
If your Hive Thermostat is showing as offline in your Hive app, it means it has lost connection to the Hive Receiver. Press the tab on the base of the thermostat to remove it from the wall. (or pull away from the back plate if you have the thermostat with the touch screen icons).
How do I reduce WiFi interference?
Tips to Fix WiFi Interference
- Relocate your wireless router away from nearby routers, appliances and dense building materials.
- Unplug the appliances and devices when not in use.
- Avoid using too many wireless gadgets at the same time within close proximity of each other.
- Try using different wireless frequency (5GHz vs.
What kills WiFi signal?
Anything that has metal, such as metal blinds, doors, furniture, infrastructure, and walls, can greatly diminish or completely eliminate the WiFi signal. The more metal there is between your WiFi router and the connected device, the worse the WiFi signal will be.
Which two sources cause interference for WiFi networks?
Common Sources of Wireless Interference
- Microwave ovens.
- Cordless phones.
- Bluetooth devices.
- Wireless video cameras.
- Outdoor microwave links.
- Wireless peripherals.
- PDAs, cellphones.
- Zigbee – Wireless personal area network technology.
How can I increase my Wi-Fi range?
6 ways to extend your Wi-Fi range
- Move your existing router to a better position.
- Buy a new, better router.
- Buy a mesh Wi-Fi kit.
- Buy a Wi-Fi extender / booster.
- Buy a powerline networking adapter set with Wi-Fi.
- Switch to 2.4GHz from 5GHz.
Why does my Wi-Fi keeps fluctuating?
Because Wi-Fi uses a radio based frequency, the signal can be interrupted by Wireless interference. This can occur in multiple ways that all contribute to Wi-Fi fluctuation. A big reason why Wi-Fi signals fluctuate is due to the large number potential physical obstructions in the way.
What causes bad Wi-Fi connection?
Slow internet speeds can be caused by a number of things. Your router could be outdated or it could be too far away from your TV or computer, for example. Those fixes may be as easy as restarting your modem and router or upgrading to a mesh network. But another reason for your slow Wi-Fi could be bandwidth throttling.
Can Hive thermostat be hacked?
The Hive Active Heating app is intended to allow customers to heat their homes remotely and programme a schedule for when to turn the heating on and off. But it has now emerged that user data was being sent without encryption, meaning that hackers could have tapped into customers’ wi-fi and stolen their information.
Can Hive heating be hacked?
Hive and TP-Link among brands’ plugs found to have weaknesses.It tested 10 smart plugs in August 2020 and found that models from popular brands such as Hive and TP-Link weren‘t immune to hacking.
What is the range of Hive hub?
three metres
It’s easy to set up; you pair it with the Hub and it starts working immediately. During our tests it worked well and picked up most motion at a range of three metres within a claimed 94-degree field of view.
What WIFI channel does hive use?
Hive uses low-power zigbee mesh to communicate between their devices. This unfortunately uses the same 2.4GHz band that wifi 802.11g/n uses, and can be easily drowned out by wifi. Hive uses Zigbee channel 20 which is between the channel 8 and 9 wifi centre freqencies.
Is there a monthly fee for hive?
Hive Live is a monthly subscription service that gives you the following benefits: Ongoing warranty on all of your Hive products. 10% discount when you buy any Hive products. Free delivery on all orders.
What are the 3 lights on a Hive hub?
If your Hive Hub remains offline then please contact us. No lights = Hub or power cable could be faulty. Solid Red = Hub failed to connect to the internet. Solid Red & Green = Hub failed to start correctly.
Does Hive thermostat work without hub?
For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.
Why does my Hive outdoor camera go offline?
Hive View Outdoor can be physically powered on and off using the power socket. When powered off the camera will appear as offline in the app and will stop functioning.Check if the camera has overheated. Make sure your camera is away from direct sunlight or any heat sources such as radiators or electric heaters.
Contents