Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes.
How does the WYZE motion sensor work?
The Motion Sensor detects the motion of objects with a heat signature such as people and animals, though it may also sense other warm objects that move (for example, heat coming out of a vent) by sensing infrared light. The sensor detects objects at distances up to 26 feet and a horizontal detection angle of 120°.
How do you use motion sensor?
A motion sensor, or motion detector, is an electronic device that uses a sensor to detect nearby people or objects. Motion sensors are an important component of any security system. When a sensor detects motion, it will send an alert to your security system, and with newer systems, right to your mobile phone.
Why is my WYZE Cam not picking up motion?
Make sure event recording is enabled in the Wyze app. Tap on your camera, then the Settings gear on the top right. Tap Event Recording, then make sure the Detects Motion toggle is ON.
How far can WYZE outdoor cam detect motion?
The maximum signal range for the Wyze Outdoor Camera from the Base Station is up to 300 Feet. However, this range is for a completely unobstructed signal and may vary depending on certain factors.
What is WYZE motion tagging?
Motion Tagging is a feature available for all Wyze smart home cameras via the Wyze app, and it allows you to see exactly what triggered the motion-detected event by placing a green box on the screen around the source of motion.
How do I make my motion light stay on?
One of the quick tricks you can try is to quickly turn the motion sensor ON, OFF, ON to override the motion detection and make the light stay on. To go back to motion detection mode, turn the motion sensor switch off and wait for about 10 seconds, and then turn it on again.
Where do you place a motion detector?
The Most Effective Placements for your motion sensors:
- Corner Spaces. Put a motion sensor in the corner of each room, aimed toward the doorway.
- Near Valuables. Place motion sensors directly at your most valuable items.
- Outside Patios.
- Second Floor Bedrooms.
- Basements.
- Ceilings.
- Within Decorations.
How do I record a motion on Wyze?
Event Recording Schedule
- Tap Home, then the + plus sign on the top left.
- Tap Add Rule, then select Schedule from the list.
- Tap the Wyze Cam you want to create a schedule for.
- Select Turn on motion detection, then Next.
- Tap the + plus sign next to Name (Optional).
- Tap Start Time.
- Tap Add End Time.
- When done, tap Save.
How do you record more than 12 seconds on Wyze camera?
Go to the Wyze Cam Outdoor in the Wyze app. Go to Settings. Select Event Recording. Tap Recording Cooldown and Maximum Video Length to change their values.
How do I get WYZE cam to record all the time?
Go to the home tab on the Wyze app, select the Camera, and then click on the HD, SD, or 360p setting on the top left. The Continuous Recording has a rolling feature to it. When the card is full, it will begin to overwrite the oldest footage and roll forward.
Can Wyze Cam follow motion?
Wyze Cam Pan can follow motion automatically. Using the pan and tilt features, whenever motion is detected, the camera can move to track the motion until motion stops.
How far can Wyze Cam be from base?
You can place your cameras up to 300 feet from the Base Station provided there are no major obstructions. Obstructions such as walls and concrete will reduce the distance it can operate.
Why did WYZE remove person detection?
“In a nutshell: Person Detection will be temporarily removed from Wyze Cam beginning with a new firmware release planned for mid-January 2020, due to the unexpected termination of our agreement with our AI provider.26, 2019 would have to sign up for Cam Plus proper and pay a monthly fee.
What is the difference between motion tracking and motion detection?
In basic terms, a security camera equipped with motion detection technology has the ability to, through an advanced algorithm, notice when the area that it’s monitoring or recording undergoes a change.However, unlike motion tracking cameras, motion detection cameras are almost always fixed and cannot move.
How do you set up a WYZE detection zone?
To set up a Detection Zone:
- In the Wyze app, pick the camera you would like to edit by selecting it to enter the live stream.
- Tap the Settings > Detection Settings > Detection Zone.
- Toggle Detection Zone on/off.
- When Detection Zone is on, drag the corners of the box to set your motion detection target area.
Why does my sensor light not stay on?
Your motion sensor light stays on. These lights are designed to go off after movement has ceased, generally within 30 to 60 seconds. If your motion sensor light won’t go off or stays on for long periods of time, it may require a reset.
Why does my motion sensor light stay on during the day?
What Causes my Light to Stay On? Several things can cause your motion detector to stay on, including age, storm damage, a power surge, improper installation, and improper settings. A few issues are easy to correct without professional help.
Why is my sensor light not working?
If the light won’t come on after adjusting and cleaning the sensor, try a simple trick. Turn off the circuit breaker that controls the light circuit and leave it off for 30 minutes.If the light doesn’t come on when you turn the breaker back on, try replacing the bulb. If that doesn’t work, the sensor may be bad.
How does an alarm motion sensor work?
An active ultrasonic motion detector emits ultrasonic sound waves that reflect off objects and bounce back to the original emission point. When a moving object disrupts the waves, the sensor triggers and completes the desired action, whether this is switching on a light or sounding an alarm.
How does a motion sensor light switch work?
The sensor uses a photodetector, which converts light in the wavelengths into electrical current that triggers an alarm in the minicomputer housed in the detector, activating the switch. To prevent nuisance switching, the computer ignores slow changes in room temperature due to sunlight.
Contents