How Do I Connect My Z-Wave Yale Lock?

Complete the following steps to include your Yale Z-Wave Lock:

1. Enter exclusion mode. You should put your alarm system into its Z-Wave exclusion mode for clearing devices.
2. Clear the lock. Bring the Yale Lock into close proximity of the Z-Wave controller.
3. Enter inclusion mode.
4. Pair the lock.

How do I pair my Yale Smart lock?

How to Set up a Device in the Yale Access App

1. Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
2. Enable Bluetooth.
3. Set up the Device in the Yale Access App.
4. Scan the QR Code.
5. Install Your Assure Lock.
6. Power Your Assure Lock.
7. Create Master Entry Code.
8. Remove the Batteries.

How do I connect my Yale lock to Bluetooth?

Trying to connect over Bluetooth

1. Open the Yale Access App and go into Settings.
2. Navigate to Connect Settings.
3. Select Disconnect Device to unpair the Connect from the lock.
4. Select Disconnect to complete the action.

How do I reset my Yale Z-Wave module?

If you want to factory default your Yale Z-Wave Lock, complete the following steps:

1. Prepare the lock. Remove the battery cover from the lock.
2. Press the reset button. Press the reset button, and keep it held down.
3. Reapply power. With the reset button held down, reinsert the battery to reapply power.
4. Reassemble the lock.

Why is my Yale lock not connecting?

Make sure that your phone and your Connect or Guard are both connected to the same Wi-Fi network. If you have a Wi-Fi extender in your home, it can also help to have both your phone and your Connect or Guard connected to the same equipment (either your extender or your wireless router).

How do I connect my Yale lock to my iPhone?

Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device. Using your iPhone® or iPad®, scan the 8-digit Accessory Set-Up Code located on the back of your iM1 Installation Manual (inside the Network Module box). You can also manually enter this code in the app.

Does Yale lock have Bluetooth?

The lock has Wi-Fi and Bluetooth so it allows you to lock or unlock, share access and see who comes and goes all using your app, from anywhere!Lock, unlock, share access and see who comes and goes from anywhere using the Yale Access App – no additional hub needed, WiFi Connect included.

How do I reset my Yale lock?

Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says “Just a moment, erasing all settings.” Release the reset button.

What app should I use for Yale assure lock?

Yale Access
What is Yale Access? Yale Access is the Yale App that enables customers to remotely access and manage Yale smart products, including Assure Locks, Smart Cabinet Locks, Smart Delivery Boxes and more, from their smartphone or tablet.

How do I connect my Yale network module?

To install your Yale Connect:
In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

How do I reset my home connect lock?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

How do I reset my Yale wireless module?

Remove the battery cover and batteries from the lock. Remove the interior escutcheon to access the reset button within the lock. The reset button is located beside the PCB cable connector. Reinstall the batteries while holding down the reset button for a minimum of 3 seconds and then release.

How do I reset my Yale Keyless Door lock?

To perform a factory reset of your Nest x Yale Lock:

1. Remove the battery cover and batteries.
2. Remove the inside of lock to access the reset button.
3. The reset button (see image) is located on the left side of the PCB cable connector.
4. While pressing the reset button (for a minimum of 3 seconds), reinstall the batteries.

How do you open a stuck Yale lock?

Here are some troubleshooting steps to try:

1. Open your door.
2. Slowly use the thumb turn inside your home to extend the deadbolt all the way to the locked position, then retract it back to the unlocked position.
3. Close your door.
4. Again, use the thumb turn to extend and retract the deadbolt.

Where is QR code for Yale lock?

When setting up your product, the app will ask you to first scan your Yale Access QR Code. This code is located on either documentation insider your packaging, on your smart module, or on the battery cover of your product. If you cannot locate your QR code, you can manually enter the serial number into the app.

How do I register my Yale lock module?

Steps to Register Your Smart Module:

1. Remove the batteries from your lock.
2. Remove and reinsert the Smart Module into the slot in the battery compartment.
3. Reinsert the batteries.
4. Wake up the keypad by pressing the Yale logo or any key.
5. Enter your Master Entry Code and then the gear icon.
6. Press 7 followed by the gear icon.

Is my Yale lock WiFi?

Your lock doesn’t use Wi-Fi. Instead, it uses a low-power connection to talk to Connect or Guard. Your Connect or Guard then uses Wi-Fi to send information from your lock to the Nest app. This indirect connection helps your lock conserve battery power.

Can you use Yale lock without WiFi?

The Nest x Yale lock does not require WiFi to work. It will function as a keyless entry even without WiFi.

How do I reprogram my Yale keypad lock?

How do I set or change the primary code on my Keyless Connected Smart Door Lock?

1. Wake up the keypad by touching it using the palm of your hand.
2. Enter your current master code and then press the hash button.
3. Then press the number 1, followed by the hash key.
4. Enter a new master code, which must contain 6 numbers.

How do I get my Yale lock back online?

Your lock doesn’t connect directly to Wi-Fi. Instead, it uses a Google Nest Connect or Google Nest Guard for its internet connection. So you’ll only need to update the Wi-Fi information on your Connect or Guard in order to get your lock back online.

How do I add a Yale lock to my Yale app?

Open the Yale Secure app and create a new home by tapping the + icon in the top right corner. Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device.