Companion dimmers allow you to dim from either end of a hallway. Use up to nine companion dimmers with only one Maestro LED+ dimmer. Coordinating Claro wall plates and accessories sold separately.
How does a companion dimmer work?
The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.
Can you have two dimmers on the same circuit?
You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
Do you need two dimmer switches?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only. In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch.
What does a companion switch do?
Wired Dimmer and Switch Companions pair with Decora Smart Dimmers, Switches or Fan Speed Controls to provide additional lighting control where needed, such as at the base of a staircase, the end of a hallway or open areas with multiple entrances that have existing 3-way or more control.
Can you put two dimmers on a three-way?
Two dimmers may be installed to control one or more lights as long as the dimmer switches are compatible with each other, such as one being the Master, and the other being the Slave. The key here is that you cannot install standard 3 way dimmer switches.
What is a maestro companion switch?
The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch.Up to 9 companion switches can be linked to a Maestro or Maestro wireless switch, for a total of 10 areas of control.
Do they make 4-way dimmer switches?
You can have several 4-way switches in a circuit, so long as you have two 3-ways at either end. I think you can always substitute one 3-way dimmer for one of the 3-way regular switches. When wired right, every switch can turn on or off the lights, but usually only at the level the dimmer is set to.
Can you dim lights from two locations?
You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Can you have 2 dimmers on a 2 way switch?
Installing the Two-Way Dimmer Switch
Traditionally, you cannot dim a light from two different switches, as it will cause a conflict in the circuitry.A master and slave switch controls the dimmers in multiple locations around your house. The master is a one-way circuit that will only work with a slave switch.
Can you have a dimmer switch and a normal switch?
You cannot use 2 dimmer switches on the same switch circuit. So you’ll need a 3-way dimmer switch, normally installed where the circuit is fed ( incoming power ), and a standard 3-way switch at the other location which would normally be where the switch leg is located.
Does Kasa make a 3 way dimmer switch?
Kasa Smart provides a full suite of Wi-Fi switches, from dimmers to 3-way switches, that work together with the Kasa Smart app to design the best lighting for any occasion. Even set schedules to make it look like you’re home when you’re not.
What are three types of dimmers?
Different Types of Dimmers
- Incandescent/Halogen. These types of bulbs require resistive dimmers due to the filaments inside of them.
- Magnetic Low Voltage (MLV) Transformers that reduce higher voltages to less than 30 volts are called low-voltage transformers.
- Fluorescent.
- Light Emitting Diode (LED)
What dimmer switch do I need?
Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.
Can you put a dimmer switch on LED lights?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
What is the blue wire on a motion sensor?
The low voltage occupancy input (Blue wire) and DC return (Black wires) of the power packs must be connected together for all power packs to operate together as one. Connect the Blue (occupancy) wires of all power packs and sensors together. Connect the Black (return) wires of all power packs and sensors together.
Can you put a motion sensor on a 4-way switch?
You cannot replace a 4-way switch with the sensor you have. The sensor you are using can either function as a 2-way or 3-way switch, it does not function as a 4-way switch. This is what a typical 4-way circuit looks like. Notice there are two 3-way switches (on the ends), and a single 4-way switch (in the middle).
Can you use a 3 way dimmer on a single pole?
Yes it can work. 3-way switches are spdt (single pole double throw) with 3 screw terminals, and regular switches are spst (single pole single throw) with 2 screw terminals. Just pick the correct two contacts and you are good to go. .
Are all dimmer switches the same?
Dimmers all perform the same function, altering the illumination produced by the attached fixtures, but there are many types of dimmer switch controls. These traditional switches have a rotating knob that controls the light level.Many of these dimmers are similar to toggle controls.
What is a 4-way switch?
4-Way Switches
Four-way switches are used to control lighting from three or more locations.There are four terminals that provide two sets of toggle positions on a four-way switch. Each set of terminals is one of the toggle positions. When the switch is in the up position, the current can flow through two terminals.
What is Maestro dimmer?
The Maestro dimmer provides an easy-to-operate tap switch that turns lights on/off to your favorite light level. Use the rocker dimmer to adjust lights manually.Combine with Maestro companion dimmers to control a single light from up to 10 locations.
Contents