How Do You Use The Rinnai App?

https://www.youtube.com/watch?v=Ig0qg05jIlg

Does Rinnai have an app?

The Control-R™ Module attaches easily to the Rinnai Tankless Water Heater by a two-wire interface quickly connecting through your Wi-Fi network for monitoring. Once connected and the free Rinnai mobile app is downloaded, the Rinnai Tankless Water Heater can be controlled using your smart phone or tablet.

What is a Rinnai controller?

Rinnai’s proprietary control•r™ Wi-Fi Module for tankless water heaters connects to your home’s Wi-Fi so you can monitor alerts, manage schedules, easily register your unit, and more.

How does Rinnai push button work?

The Push Button mounts near the point of use (such as a kitchen faucet or bathroom sink) and activates the recirculation system. The recirculation system will deactivate after five minutes from initiation or when the water has reached the set temperature.

How do I connect my Rinnai Control R to the Internet?

Download the Rinnai app from the Apple® Store or Google® Play Store. 3. Connect the module to your Wi-Fi network. When setup is complete, the owner will have access to remotely monitor and control their Rinnai tankless water heater using their smart device.

How do I connect my Rinnai Wireless Controller?

You have 5 minutes to pair the Push Button or Motion Sensor with the module before pairing mode times out. Press and hold down the Connect button on the module until the LED turns GREEN. Then, release the button (you will need to repeat this process to pair each accessory).

What is the priority button on Rinnai?

When you press the “Priority button,” the green light will glow, indicating that the controller controls the temperature and that a water heater is ready. Rinnai water heaters work in the temperature range from 98 F to 140 F, while they come with the factory setting of approximately 120-125 F.

Where are the DIP switches on a Rinnai water heater?

Locate the dip switches, which are located under the bottom right corner beneath the label.

How do I reset my Rinnai controller?

control•r™ 2.0 – How do I factory reset the module? Press and hold the Connect button on the module until the LED blinks RED and WHITE, and then release then QUICKLY tap 3 times. This will restore the module back to original factory settings.

Why is my Rinnai water heater not working?

How to Fix: Check for low flow in the water circulation system which causes short cycling. Confirm there are no obstructions in the combustion chamber or exhaust piping. Confirm no blockage in heat exchanger fins. Clean out heat exchanger fins or replace heat exchanger.

How does a crossover valve work?

A crossover valve, between the hot- and cold-water lines, is mounted under the sink.The water flows very quickly through the pipes. This water, instead of going down the drain, flows through the crossover valve into the cold water pipe and eventually back to the water heater.

How do you reset the control R module?

Factory Reset Instructions

1. FIRST – Press and hold connect for 30 seconds until flashing white, then let go. wait 1 minute until solid red.
2. Note: If, after pressing and holding the connect button for 30 seconds, your module is flashing red/white, quickly press the connect button 3x rapidly in a row.

What is the normal temperature setting for a tankless hot water heater?

You’ll want to shoot for 100-115 degrees Fahrenheit for your water to be heated. If your groundwater temperature is 60 degrees and you want your shower at 110 degrees, that’s going to be a 50-degree rise.

What is code 12 on Rinnai?

If you’re getting Rinnai error code 12 on your hot water unit, it indicates that a flame failure has occurred on the system. In this instance, your hot water unit has not recognised that there is a flame in the burner box.Incorrect gas pressure supply your hot water unit.

Does Rinnai have pilot light?

The Rinnai unit won’t operate in the event of a power failure. Rinnai Tankless Water Heaters don’t have a standing pilot light. They use an electronic ignition.

Why does my tankless water heater take so long to heat up?

The length of the delay can be determined by a few factors, including the distance between the water heater and the outlet. In other words, the longer the water has to travel, the more cold water will need to be discharged before the hot water appears.

How do I turn the water temperature up?

Twist the dial on the bottom of the water heater to change the temperature. Gas water heaters are easy—they feature a single knob that controls the amount of heat being directed to the unit. Turning this knob to the left (counterclockwise) will crank up the temperature, making the water hotter.

Do I need to service my Rinnai gas heater?

Manufacturers typically recommend that gas heater maintenance and hot water service of their gas appliances be serviced every one or two years. For example, both Rinnai and Bosch generally recommend 2 year and hot water service intervals while Rheem and Paloma recommend annual servicing.

How do you turn on a old Rinnai heater?

All necessary adjustments to the operation of the Rinnai 2001 can be made with this control. Turn control Knob to “IGNITION PRESS”. Press the knob firmly, and hold down for about 15 seconds, the electronic ignition system will ignite the pilot, and the spark will continue while the knob is held down.

How do you take the child lock off a Rinnai gas heater?

To deactivate the Child / Function Lock simply press both the “ ” and “ ” buttons simultaneously for 2 seconds and the Child / Function Lock indicator will go out. The Child / Function Lock can be deactivated at any time in this way.