How Do I Reset My Wyze Sprinkler Controller?

Try pressing and holding the reset button on the back for 10 seconds until the lights start flashing yellow and try to pair your Wyze Sprinkler again.

How do I change the WiFi on my WYZE sprinkler?

Press and hold the on/off button on the side of the Plug until the status light begins to flash blue. Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.

How do you schedule a WYZE sprinkler?

To create a Fixed Schedule, tap on your Wyze Sprinkler in the app, then tap Settings icon. Next, tap on Schedule. Under “ONLINE”, tap Create Schedule, then Fixed Schedule. Membership discounts on Wyze products are only available on purchases on Wyze.com.

How do I add a zone to my WYZE sprinkler?

Download the Wyze APP and select “Add a product”, then the app will guide you to complete the setup process. After finishing the system setup, you can create the irrigation tasks. You can run the zone watering easily on the device. Press the left and right button to select a zone.

How do I reset my WYZE sprinkler?

Make sure the Wyze Sprinkler is plugged into power, then press the reset button on the back.

How do I reset my WYZE base?

Reboot your Wyze Base Station to reestablish the connection.

1. Unplug the base station from power, wait 5-10 seconds, then plug it back in.
2. Once the status light is solid blue, the reboot is complete.

Does WYZE sprinkler controller work with Alexa?

The Wyze Sprinkler controller supports up to eight sprinkler zones.As with most other sprinkler controllers we’ve tried, the Wyze Sprinkler controller doesn’t support Alexa or Google Assistant—or at least, not yet, with Wyze telling us that voice assistant support is coming “in the future.”

How does a sprinkler indexing valve work?

Indexing valves are operate by providing a water supply to the indexing valve.Then the distributing valve indexes to the next section or zone in your garden. When the water supply is activated again this zone will be irrigated. This process is repeated until all of the areas in your garden have been irrigated.

How does WYZE sprinkler plus work?

Sprinkler Plus is an optional service that adds a ton of smarts to your Wyze Sprinkler! With Sprinkler Plus, your Wyze Sprinkler gains advanced weather data that can be used to create Smart Schedules, enable Weather Skips, and provide detailed Zone Moisture information.

How do you use WYZE schedule?

An example of Device Trigger with Wyze Plug

1. Enter a name for the schedule. Try “Turn off bulb and plug”
2. Tap Save.

Which brands of sensors work with WYZE sprinkler?

Wyze Sprinkler is compatible with most major brands of rain and soil sensors:

• Rainbird. Wired Rain Sensor. Wireless Rain Sensor.
• Orbit. Wired Rain Sensor. Wireless Rain Sensor.
• Hunter. Wired Rain Sensor. Wireless Rain Sensor.
• Irritrol. Wired Rain Sensor. Wireless Rain Sensor.
• Toro. Wired Rain Sensor. Wireless Rain Sensor.

Does WYZE sprinkler work with Alexa?

These sprinkler controllers use hyperlocal weather forecasts, algorithms, Alexa control and much more.

Does WYZE have water sensor?

Users of Wyze’s crazy-cheap Home Monitoring kit are about to get a couple of new optional accessories: a leak sensor that can detect moisture under sinks, dishwashers, and other leak-prone areas, and a temperature- and humidity-tracking climate sensor.

How do I reset my WYZE?

With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.

What is Wyze Base Station password?

Tap Go to WiFi selection, then select the network that looks like “Wyze_bind_xxx”. No password is required to connect to this network.

How do I factory reset my WYZE hub?

Factory reset Wyze Sense Hub.

1. In the Wyze app, tap on your hub, then the Settings gear > Delete Device.
2. Single-press the reset button on the back of the hub.
3. In the app, tap the + plus sign > Add Device > Sensors > Wyze Sense Hub.
4. Set up your hub again.

What is a irrigation system?

Irrigation is the artificial application of water to the soil through various systems of tubes, pumps, and sprays. Irrigation is usually used in areas where rainfall is irregular or dry times or drought is expected. There are many types of irrigation systems, in which water is supplied to the entire field uniformly.

What does a sprinkler indexing valve do?

The indexing valve works either manually or fully automatic with a controller to turn the water supply on and off (pump or solenoid). The indexing valve for sprinkler systems operate under most all water conditions.

How does an irrigation indexing valve work?

How an Indexing Valve works? Indexing valves are activated by sufficient water pressure being turned on and off. Therefore, no electrical wiring is required to the solenoid valve. All that is needed for an indexing valve to operate is a controller to turn on and off the water supply (pump or solenoid).

What are indexing Valves?

Indexing valves allow an irrigation system to change zones.

Does WYZE have a monitoring system?

If you’re looking for reliable home monitoring for a third of your monthly Netflix subscription cost alone, you can’t beat Wyze. The Wyze Home Monitoring system is a robust home security system for the price. Pay $60 for one year of home monitoring and you get all the equipment for [half off].