For Hive Active Heating a hub, a receiver and a thermostat are installed.In ‘stand-alone’ mode the thermostat acts as a standard wireless programmable thermostat without the remote heating control features and functionality of Hive Active Heating.
How do I put hive in standalone mode?
Instructions
- Go to your boiler and locate the following
- Turn the boiler / heating systems isolation switch off for a few seconds then switch back on.
- Press AND HOLD the Central Heating button until the STATUS light flashes pink.
Can I use hive without hub?
For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.
Can hive be used without WiFi?
If the heat or the hub is disconnected from the Internet, the Hive application will show you and tell you what is wrong. Yes, your thermostat will continue to function on its pre-set schedule if not connected to WiFi.
Can I use hive without thermostat?
No. Hive Radiator Valves and Hive’s thermostats work well together, but you can use Hive Radiator Valves without a Hive thermostat. You can even use Hive Radiator Valves in homes with no central thermostat.
How do I stop hive from searching my thermostat?
actively seeking to connect If no thermostat is found within to a Hive thermostat. this time it will stop searching and the status light will turn solid white. by pressing the heating’ and ‘hot water buttons on the receiver (hot water only available on dual channel receivers).
Why is my hive receiver offline?
If your Hive Thermostat is showing as offline in your Hive app, it means it has lost connection to the Hive Receiver. Press the tab on the base of the thermostat to remove it from the wall. (or pull away from the back plate if you have the thermostat with the touch screen icons).
Can you manually override Hive?
Hive Active Plug – Your plug will continue to work. Until your broadband connection is restored you can control your plug, whether it is on or off, manually from the plug itself.Until your broadband connection is restored you can control your light, whether it is on or off, manually from the light switch itself.
Is Hive transferable?
Hives also referred to as urticaria are welts on the skin caused by an itchy rash.Hives aren’t contagious, meaning you won’t develop them on your skin by touching hives on another person. However, the trigger that causes this skin reaction can be contagious.
Can I use Hive without the app?
No, but without a smartphone you won’t be able to use the Hive app and experience Hive products to their fullest. If you don’t have smartphone or tablet, you can control your Hive products from your desktop in your Hive dashboard.
Is there a monthly charge for Hive heating?
You must pay your first monthly payment under the payment plan at the point of purchase. If you buy any additional Hive product(s) at the same time as taking out a Heating Plan, you must pay for such products at the point of purchase.
Does Hive slow down internet?
Since recent introduction of hive products, noticed internet stability reduced and generally seems slower on devices connected by wifi. Mid floor connection prior to introduction of more devices was mostly stable with occasional cut outs on mobile / laptop and tablets.
Do you need Hive radiator valves?
How many Hive radiator valves do I need? It’s entirely up to you. If you want full room by room control around your house then you’ll need a Hive Radiator Valve on your radiators in each room.
How do I turn off Hive receiver?
Switch the boiler off at the isolation switch/fuse spur (this should be located near your Hive Receiver next to your boiler). All of the lights on the receiver will then go out.
Does Hive automatically change time?
For thermostats connected to a Hive Hub and controlled via the Hive App: If your thermostat is online and connected to your Hive Hub, the time should automatically update. Your Hive Hub checks the time using your home broadband network and saves this on your Receiver, which then shares it with your Thermostat.
How does Hive work UK?
How does it work? Hive Heating tells your boiler to heat up your hot water and your home in general.The thermostat comes with a Hive Receiver, which attaches to your boiler’s circuits and relays the thermostat’s instructions to it, and the boiler’s temperature back to the thermostat.
How do I get my Hive back online?
You can reconnect the hub to your Wi-Fi by going to your Hive app, tap the Hub 360, Settings, Change Wi-Fi, and follow the in-app instructions. Step 6. Go back to ‘Menu’ in the Hive app, tap ‘Manage devices‘ then refresh the page. If the hub is showing as ‘connected’ you’re done!
Why is my Hive thermostat not connecting to the app?
Hold the central heating button down on the receiver until the status light flashes pink. Release the button then press and hold it again until the status light is double flashing amber. To reconnect the receiver to your hub, put your hub into pairing mode by selecting ‘Install devices’ in the Hive app menu.
Can you factory reset a Hive hub?
The Hive Hub can be reset by pulling the power cable out and putting it back in again. It will take about 5 minutes to fully reboot and pair to your devices. After the 5 minutes, refresh the app or website.
How do I delete an offline hive device?
All you need to do is:
- Press “Edit” on the app (bottom left of the Dashboard)
- Press the “X” above the offline device in question.
- (This will then populate the attached screenshot)
How do I transfer Hive to new owner?
Your Hive Hub can’t be used by the new occupier of your home, so take that with you so you can install it in your new premises. If you’d like to continue using Hive Active Heating, you’ll need to buy it for your new home if it’s not already installed there.
Contents