Spotlight Cam works great at eye-level, or slightly higher. At nine feet from the ground, your Spotlight Cam can cover a wide visual area, as well as capture HD video of visitors’ faces. When Spotlight Cam is mounted too high, it often gets angled sharply downwards.
How high should a ring camera be installed?
Make sure your cameras are placed at the right height. About nine feet off the ground outside and seven feet inside is a good rule-of-thumb for mounting security cameras. One of the most common mistakes people make when mounting their cameras is to put them too high or too low.
How low can you mount a ring Spotlight Cam?
Ring’s Support Center recommends mounting your Spotlight Cam lower rather than higher. If you are looking for your camera to reach its full potential of up to 30 feet of detection, you should keep your Ring Spotlight Cam mounted at 9 feet or less.
What is the range of the ring spotlight camera?
30 feet
The motion sensor, encased in a dome on the bottom of the camera, has a 270-degree detection range. The camera streams and records video in up to 1080p resolution and supports two-way talk with noise cancellation and night vision up to 30 feet.
How far does ring spotlight camera detect motion?
30 feet
The motion detection on powered Ring devices can detect up to 30 feet from the camera.
How high should the ring floodlight camera be mounted?
Floodlight Cam works great at about nine feet above ground level with the motion sensor parallel to the ground. From this height, your Floodlight Cam can cover a wide visual area, as well as capture HD video of visitors’ faces. When Floodlight Cam is mounted too low, it reduces your Optimal Motion Zone.
How far can ring camera be from router?
In general, a Ring Doorbell cannot be more than 30 feet away from the router.
Can ring camera be mounted upside down?
The Ring Floodlight Cam can be mounted upside down on soffits, ceilings, and other similar surfaces. In fact, there are ways to mount this camera that do not impede its use at all.
Is Ring spotlight bright enough?
If you live in a small home or a neighborhood, the Ring Spotlight Camera is probably bright enough to illuminate your area. However, if you live on a large piece of property or have a big backyard, the Ring Floodlight Camera is a much better option.
How high up should you put a motion sensor?
Overall, a motion detector should be mounted on the wall, between 6 and 8 feet high. Some people also put their motion detectors on or near the ceiling.
Can you tell if someone is watching you on Ring?
There isn’t any way to know if someone is watching you on a Ring cameraat least not through physical observation. However, it’s possible you could see the infrared light at night turn on if the camera is activeassuming the night vision is on and you’re at the correct angle to view it.
Why is my Ring not picking up all motion?
If the Ring doorbell is positioned correctly but won’t detect any motion, perhaps you’ve set the sensitivity too low. Tap the three lines on the top left of your Ring app and select the video doorbell. Choose Motion Settings. The motion sensitivity slider is the third option in the menu.
Can Ring spotlight be mounted horizontally?
Can I install Floodlight Cam upside-down or horizontally? Yes. Floodlight Cam can be mounted on a wall or ceiling.
Does Ring slow down Wi-Fi?
Ring systems are dominantly WiFi based. This means that they are going to take up precious ‘slots’ (i.e. bandwidth) in your home WiFi system. Depending on which Ring devices, and how many you have, this could be a lot of data. A fully powered Ring system could be using 50+ gigs of bandwidth each month.
Where should I place my ring range extender?
Where should I install my Range Extender? Choose an outlet between your Base Station and the Ring Alarm security devices farthest from your Base Station. You can move the Range Extender to another outlet as needed to improve signal strength and to expand the range of your Z-Wave network.
Why is ring so slow?
Why is my Ring Doorbell lagging? The most common causes of lagging are poor Wi-Fi signal strength and slow internet speeds. A poor Wi-Fi signal may be caused by physical obstructions between your router and your doorbell or too many devices using the network.
What is the difference between ring Spotlight and Floodlight?
The main difference between the Ring Floodlight and Spotlight has to do with how they receive their power.With the floodlight, enhanced technology is used and allows for color viewing. The spotlight has the more basic night vision set up and only allows for viewing in black and white.
Can you mount a ring camera sideways?
Certainly in the Ring Video Doorbell, the motion sensors can detect motion up to 180 degrees horizontally and from 1m to 10m outward from the doorbell itself.Mounting your video doorbell horizontally could well affect its ability to detect motion using the motion sensors.
How do I make my ring camera upside down?
To flip your video’s image, do the following:
- Open up your Ring app.
- Select the Indoor Cam.
- Tap Device Settings.
- Tap Video Settings.
- Tap Rotate Video toggle.
What are the lumens on ring spotlight?
Ring Spotlight vs. Floodlight Specifications
| Specifications | Ring Spotlight | Ring Floodlight |
|---|---|---|
| Viewing Angle | 140° | 140° |
| Brightness | 300-375 lumens | 1800 lumens |
| Operating Temps | -5 – 120°F | -22 – 120°F |
| Alerts | Push alerts based on motion detection | Push alerts based on motion detection |
How long does ring Spotlight cam battery last?
six to twelve months
The camera is powered by the same quick release battery pack used on the Ring Video Doorbell 2. It contains a mini USB charging port and is rated to last for six to twelve months between charges depending on camera and spotlight activity.
Contents