How Do I Find The Ip Address Of A Reolink Camera?

Step 1. Download the free Reolink software on your phone or PC. Step 2. Come to its device settings, and then find the security camera IP address on the Network Status tab.

How do I find my cameras IP address?

Android. Tap on Advanced Setting. Tap on About Device. The IP Address is listed under Local.

How do I change the IP address on my Reolink camera?

How to Change Camera’s IP Address to Static IP Address via Reolink Client (New Client)

1. Please launch your Reolink Client and click the “Device Settings” icon.
2. Click Network->Set up.
3. Change the Connection Type in Network Settings from DHCP to Static, then click “Save” to confirm.

How do I connect my Reolink camera to my computer?

How to Connect Your Cameras Directly to the PC and Log in via Windows Client

1. Please power on this camera and then connect it directly to your PC with a network cable.
2. Open Reolink Client, then click Add Device -> Scan Device In LAN to find the IP address of your camera.

How do I locate my IP address?

Find your IP address in Windows

1. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you’re connected to.
2. Under Properties, look for your IP address listed next to IPv4 address.

What is Reolink default password?

blank
Reolink default username is admin and the default password is blank(no password). If you forget the password, you may choose to reset your device. Note: For Reolink NVRs, you may press the reset button or use super-password to reset the admin password to default.

How do I find my NVR IP address?

Find the IP address and Web port # of your NVR (IP address can be found in System Setup > Network Setup).

How do I connect to an IP camera?

Plug an Ethernet cable (a.k.a. Cat 5 cable) into the Ethernet socket of the network camera, then plug the other end to the router (a.k.a. gateway or access point). If this network camera does not have Wi-Fi, this may be the only step needed for the network configuration. Find the IP address of the network camera.

Can I connect IP camera directly to PC?

You can connect your IP camera directly to a PC via network cable as long as you have a power supply to power up the camera and minimum skills for the setup.

Why won’t my IP camera connect?

Make Sure There Is No Signal Interference. If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router.

How do I find my camera UID number?

To prepare for this configuration the UID must be documented for the camera. The number is usually located on a label on the bottom or the side of the camera.

Why is Reolink not connecting?

Make sure that you choose the same Register Mode as Reolink App. Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer.

How do I log into my Reolink camera?

If you want to log in to your Reolink account, please click the humanoid icon at the upper right corner of the website, and choose “Log in”. Then it will turn to the login page. Please enter the email address that you use to sign up for the Reolink account before and the password.

How do I connect my camera to WiFi?

Android OS

1. Open the V.360 companion application.
2. Select your camera.
3. When requested to use Wi-Fi, select “Use Wi-Fi”
4. A gear will pop up, click it.
5. Select Wi-Fi under the name of your camera.
6. Go back to main menu of the app.

What does an IP address look like?

An IP address is a string of numbers separated by periods. IP addresses are expressed as a set of four numbers — an example address might be 192.158.1.38. Each number in the set can range from 0 to 255. So, the full IP addressing range goes from 0.0.0.0 to 255.255.255.255.

How do I find out someone’s IP address?

1: Use Command Prompt
Only thing you need to do is to open the command prompt and on the DOS screen, type “ping” “the address of the website you want to trace” and then hit enter. As an example, if you want to know the IP address for Google, type “ping www.google.com” and press enter.

How do I find my IP address without command prompt?

To find the IP address on Windows 10, without using the command prompt:

1. Click the Start icon and select Settings.
2. Click the Network & Internet icon.
3. To view the IP address of a wired connection, select Ethernet on the left menu pane and select your network connection, your IP address will appear next to “IPv4 Address”.

How do I find my Reolink password?

If you forget your Reolink account password when logging in your account via Reolink APP;

1. Step 1: click “Lost your password?”
2. Step 2: Input the email address which was used to register your Reolink account.
3. Step 3: A notification will jump out, asking you to check your email and follow the link to reset your password.

What is Reolink UID?

UID is a 16-character code and it is the camera/NVR’s unique ID that used to connect to the internet remotely. Use UID to add your camera/NVR on Reolink app or Reolink Client, you can access them remotely. Check details in How to Access Reolink Products Remotely.

How do I reset Reolink password?

How to Change My Reolink Account Password

1. Step 1: Please go to my account.
2. Step 2: Click “ACCOUNT DETAILS”.
3. Step 3: Go to the Security page and click “Reset Password”.
4. Step 4: Enter your old and new password, and then confirm the new password and click “Save” to save the settings.

Does NVR assign IP address?

In order for your DVR/NVR to communicate with the IP cameras you need to put the DVR/NVR on the same network as the cameras. They need to share the same IP address scheme. Depending on the IP address of your router, usually it is 192.168.X where X is a unique number assigned for each device on the network.