How Do I Fix Voopoo Argus?

If your Voopoo Argus Air isn’t vaping, the first thing that you should do is make sure the device isn’t turned off. Press the fire button five times. If that doesn’t resolve the issue, connect the Argus Air to your computer until the battery is fully charged, and then try vaping again.

https://www.youtube.com/watch?v=R9Lb_7SLDkM

Why has my Voopoo vape stopped working?

The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.

How do I reset my Voopoo Argus?

Argus Pro – Functions

1. Turn the device on – 5 Clicks of the fire button.
2. Adjust Wattage – Press/hold the + or – buttons.
3. Lock Device – Press and hold the fire button and + button.
4. Reset Puff Counter – Press and hold the fire button and – button.
5. Change Modes – Press the fire button 3 times quickly.

How do I unlock Voopoo Argus?

Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device.

How do you put Argus pro in auto mode?

Mode of Operation
The Argus Pro 80W pod mod is both draw activated and fire button activated. Either option is selected by switching between the different modes. For auto-draw activation, select “A&P” mode, for button firing, select “P” mode. The color OLED display really is very impressive.

Why is my Voopoo drag s not working?

If the Voopoo Find S doesn’t work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn’t working, an error message should appear on the screen.

How long do vape batteries last?

between 6 and 12 months
Vape batteries are replaceable, and they usually last between 6 and 12 months, depending on how often you vape. If you stick to the tips we covered and make sure that you use the vaporizer correctly, your batteries should provide you with around 300 charges before they need replacing.

How do I fix the atomizer on Voopoo?

If your coil needs changing for a new one, it can cause this error. So if you think it is time for a new one try putting a new coil in your tank. Taking care to fully prime your coil before use. This should get rid of the ‘check atomizer’ message.

How do you reset a vape mod?

Reset the tank – You can ‘reset’ the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

Why is my vape locked?

When You First Receive Your Vape Pen, It Will Be Locked
Generally, when you first buy your vape pen, it will be in the locked position. This is for safety reasons as well as giving protection to the battery. However, you do need to check whether it is on or off when you first open the packaging.

How do you fix low resistance on Voopoo Argus?

In either case, you should charge the battery. If you see the message “Low Resistance,” the connected atomizer coil has a resistance below 0.6 ohm. The Voopoo Argus Air doesn’t work with every PNP coil; it only works with those that have a resistance of 0.6 ohm or higher. Replace the atomizer coil.

How do I reset my Argus Pro?

Step 1. Insert a reset needle into the reset hole of your camera. Step 2. Press and hold for several seconds until you hear the prompt “Factory reset succeeded!” or beeping(new version of prompt), which means the camera is factory reset successfully.

Is Voopoo Argus good?

Rugged design, excellent build quality, smooth airflow, plenty of coil options, great flavor from coils. Not great for MTL vaping, Auto-draw is not the greatest, Lanyard attachment is annoying. As you’d expect, both the Argus devices deliver an outstanding vape, in line with other Voopoo kits using the PnP coils.

Does Voopoo Argus have auto draw?

Auto Draw. The Argus Air not only comes with button activated firing, but it also incorporates Auto Draw. In some configurations, all you’ll need to do is inhale, and the device will auto fire for you.

How do I fix my atomizer?

Recap

1. Clean all contacts on battery/mod, tank or pod.
2. Remove and reinstall the coil (after cleaning)
3. Try a new coil.
4. Check the 510 pin and see if you can adjust it (mods/tanks)
5. Try another tank on your mod.
6. Try another mod with your tank.
7. Adjust base of coil carefully if you can (mainly sub-Ohm coils)

What is RBA mode?

RBA mode allows you to build your own coils and wick them exactly how you want, it provides a fresher and more clear taste compared to the OCC coils. RBA mode is not for everyone and does require you to understand some basic principles such as coil building and how to wick a coil.

How do I know if my vape battery is bad?

If you are vaping at roughly the same wattage but consistently notice the battery does not last as long as when you first started using it, it’s likely an indicator that you need to get a new one. Another sign that a vape battery needs replacing is that it gets hotter than normal either when recharging it or using it.

Is my vape battery dead?

On most vape pens when the battery is dead, a red light on the button will flash. To know if the battery is dead, screw the vape pen into the charger. The charger will show a red light if the battery is dead, and a green light when the battery is charged.

When should I replace vape battery?

But once the first sign of wear starts to show, the degrade will have started and it will exacerbate from there. Your 18650 mod battery – or any other vape battery for that matter – should be free of wear, defects, and damage. It is recommended to replace your battery when you notice any signs of physical damage.

How do you fix a short atomizer on a vape?

Check Atomizer

1. Remove the tank from your mod. Has e-liquid leaked into the mod’s threading?
2. Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank.
3. Replace the atomizer coil.

How do I fix atomizer on Voopoo drag S?

How to Fix Check Atomizer/No Atomizer with a Vape Tank

1. Try Another Tank/Mod.
2. Clean Your Contact Points.
3. Check the 510 Pin on your Tank. If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error.
4. Check the 510 Connector on your Mod.
5. Reseat Your Coil.