How Do I Wipe My Ring Doorbell?

How to Factory Reset the Ring Doorbell

1. If you’ve decided to get rid of your Ring Doorbell, here’s how to completely reset it to its factory settings.
2. Tap on the gear icon in the top-right corner.
3. Tap on “Remove Device” toward the bottom.
4. Select “Delete” when the pop-up appears.
5. That’s all there is to it.

How do you reset the ring doorbell for a new owner?

Ring Video Doorbell (1st Generation)

1. Undo the security screws and remove your doorbell from its bracket.
2. Press and hold the orange setup button on the back of the device for 10 seconds.
3. The light on the front of the doorbell will flash for several minutes; when the light turns off the reset is complete.

How do I reset my ring camera to factory settings?

1 Factory Reset a Spotlight/Floodlight Cam

1. Make sure the camera is powered up.
2. Press and hold the reset button atop the camera for 30 seconds.
3. After releasing it, the status light located at the bottom will flash a few times indicating the camera is restarting.
4. The camera is now reset to factory defaults.

How do I delete my ring account and start over?

After successfully logging into your Ring account, perform the following:

1. Click the account icon in the upper right-hand corner.
2. From the drop-down, select Control Center.
3. On the right-hand side of the screen, click the “Shared Users” button.
4. Select the User account you would like to edit.
5. Click Delete.

How do I unlink a ring device from a previous owner?

How to Remove a Ring Doorbell or Security Camera from a Previous Owner That You Know or is in your Household

1. Tap the three lines on the top left.
2. Tap Devices.
3. Tap Device Settings.
4. Tap General Settings.
5. Tap Remove This Device.

How do you reset a ring doorbell 2020?

To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting. It may take a minute to fully complete this process.

How do I unregister my ring doorbell?

How to Remove a Ring Device from the Ring app, so a New Owner Can Use It

1. Open the Ring app.
2. Tap the three lines on the top left.
3. Tap Devices.
4. Select the device you want to release from your ownership.
5. Tap Device Settings.
6. Tap General Settings.
7. Select Remove this Device.

How do you reset the ring doorbell without the app?

Ring Doorbell: How to Hard Reset

1. Locate the orange button located physically on the back of the doorbell.
2. Press and hold the orange button for more than 15 seconds.
3. Release the button after 15 seconds.
4. Let the device complete the reset for about 5 minutes, and the hard reset should be completed.

How do you get a Ring off a 2 doorbell?

These doorbells can be removed by gripping the bottom of the doorbell and gently pulling up and out at a 45-degree angle. From there, remove the battery-powered Ring doorbell (2nd Generation) by unscrewing the mounting bracket screws and removing the bracket.

Can there be two owners on ring?

Ring device Owners have control over every aspect of their Ring devices. Ring doorbells, and Ring cameras with Shared Users. Shared Users have limited access to the Ring devices and can’t control settings.If you have a Ring Alarm system, the Owner can invite Shared Users and Guest Users.

How do I change the owner of my ring account?

To change the owner of a Ring Doorbell:

1. The original owner should remove their payment information from their account and contact Ring Support to cancel their plan.
2. The new owner should then download the Ring app and complete the setup process for the device.

What kind of screwdriver do I need to remove a ring doorbell?

Ring doorbell needs a ‘Tamper Proof T15? screwdriver, also called a ‘Tamper-proof Torx’ and ‘Tamper-proof Star’ drive, to remove it. It can easily be identified by its hole at the end of the tip, where the screw head fits.

What size screwdriver does the ring doorbell use?

Torx T6 T15
Ring Doorbell Screwdriver Replacement
EMiEN Torx T6 T15 Bit Screwdriver For Ring Video Doorbell,Ring Video Doorbell 2,Ring Video Doorbell Pro And Ring Video Doorbell Elite Tear Down,Battery Change,Charge & Replacement,Wifi Password Reset Access. Why Choose EMiEN Ring Doorbell Screwdriver? 1. Fit all Ring doorbells.