To charge your Ring Doorbell, you will require a USB to AC adapter and then the blue LED ring light that is present on your Doorbell will light up. During this process, you will be able to see the level of your battery; once connected properly, the ring doorbell flashing blue when charging.
How do I know if my Ring Doorbell is charging?
Plug the charging cable directly into the port on the back of the doorbell. The ring-shaped light on the front of the doorbell will fill as the battery charges. When the light is solid blue, it’s fully charged.
Should my Ring Doorbell flash while charging?
The flashing blue light on your Ring Doorbell means that your device is charging. After about 3 or 4 hours, it should turn off automatically once the battery is fully charged. However, if it continues to flash for a long time, here are some troubleshooting solutions for you to try.
Why is my Ring Doorbell blinking?
Usually, when your Ring Doorbell is setting up, the light will spin and not flash. The LED light will change to a flashing blue pattern that moves upwards to indicate that your doorbell is in the process of connecting to your Wi-Fi network.
How long does it take to charge my ring doorbell?
between five to ten hours
Plug the battery into the charger and let it sit until it’s fully charged. Ring doorbells take anywhere between five to ten hours to fully charge.
Why is my ring doorbell not working after charging?
If your Ring Doorbell doesn’t work even after charging the battery, try disconnecting and reconnecting the doorbell with the app. If that doesn’t work, try taking the battery out and reinserting it. If both these don’t work, try resetting your device or hardwiring it.
Why is my ring blinking white?
A blinking white light at the top of your Ring Doorbell means that you have a password issue. If you see this pattern, then you should try to update the WiFi password on the doorbell from the Ring app.
What do the lights on my Ring Doorbell mean?
Primary meanings for a blue Ring Doorbell light:
Spinning Blue Light This occurs when there is a normal doorbell push. The light on the Ring Doorbell will spin blue when it is notifying you of a potential call. Solid Blue Light You will see a solid blue light when you answer a call or connect to your Ring Doorbell.
How do I know when my ring battery is fully charged?
Remove the battery by pressing the release tab. Connect the orange micro-USB charger to the charging port in the battery. During charging both the red and green lights will light up. Your battery is fully charged when the light on the battery shines a solid green.
Do I have to fully charge my ring battery?
How often do I need to charge the battery on my Ring Video Doorbell? The rechargeable battery can go months between recharges with normal use. This is dependent on a number of factors in your home’s environment such as the local weather and the number of activities captured.
Does the ring battery come charged?
If you’ve hardwired your battery-operated Ring Video doorbell, you may wonder why your Quick Release battery pack may occasionally need to be recharged.The charge from the hardwiring supplies a trickle-charge to the battery.
How do I turn on my ring camera after charging the battery?
Slide the fully charged battery back into Spotlight Cam until it clicks in place. Firmly close the battery compartment door. It might take a little pressure, but you’ll know it’s secure when you hear a click. Spotlight Cam will power up after a minute and be ready for use.
Why did my ring stop charging?
If your Ring doorbell is not charging, ensure that the Wi-Fi connection is strong and that there is no problem with the charger or charging cable. Check your house’s circuitry to see if a breaker tripped. If the issue persists, your Ring doorbell battery may be damaged and need replacement.
Setup Mode
While setting up your Ring Video Doorbell (2nd Generation), you’ll be asked to put the device into “Setup Mode.” In order to put the device into Setup Mode, press and release the orange button on the back of the Ring Video Doorbell. How do I know that my Ring Video Doorbell is in Setup Mode?
How do you turn off ring doorbell while charging?
First, you need to unscrew a single security screw from the bottom of the base. Then you can remove the faceplate. Next, push the release button, and the battery will slide out of the base. Again, you will use a micro USB cord to charge the battery.
How often do I have to charge my ring doorbell?
The Ring Doorbell is a Wi-Fi-enabled doorbell system with an integrated camera so that you can quickly see who’s at the door. But its internal battery means that you need to recharge it once or twice every year.
Does the Ring Doorbell light up?
Does the Ring Doorbell light up at night? A Ring Doorbell will only stay illuminated if it is hardwired. If your Ring Doorbell is using battery, it will try to save energy and cancel this feature. Having your Ring Doorbell lit up at night can deter invaders from approaching your home.
Why is the green light flashing on my ring chime?
Therefore, a flashing green light in relation to the Ring Doorbell system usually refers to a Ring Chime that is in ‘Setup’ mode. This is done through the Ring app. The light should return to a solid blue light once everything is set up, otherwise there may be no light at all if you have chosen to disable the LED.
Why is the blue light on my ring camera blinking?
If you see the Ring Camera blinking blue when setting up the device, there is nothing to worry about. This is the camera’s way of notifying you that it is being set up. As soon as the setup is over, the light begins to change to a solid blue, indicating that the camera is starting to function.
How long does ring battery last before recharge?
between 6 and 12 months
According to Ring, the battery in a Ring video doorbell should last between 6 and 12 months before it needs to be recharged. That estimate is based on ideal environmental conditions, though, and likely doesn’t consider the sort of high use some users may experience with their Ring doorbells.
Contents