What Lights Can I Put In A Shower?

Lighting for showers: the options

• Ceiling spots in the shower. A central built-in spot in the ceiling is the easiest way to illuminate a shower.
• Indirect ceiling lights. Indirect ceiling lights are a new trend with walk-in showers.
• Indirect wall lighting.
• A colourful wall.

What kind of light can I put in a shower?

Recessed lighting can be added to the ceiling over the tub. If you have just a tub below the light, then you can use a damp rated recessed lighting fixture. If you also have a shower over the tub area, then you should use a wet rated recessed lighting fixture.

Can a light be installed in a shower?

While it may be tempting to place a decorative fixture above a shower, it’s not simply a matter of just picking out any ceiling light you like. A ceiling light that goes directly over a shower must be rated for damp or moist areas, and certain types of ceiling light are generally not suited for over-shower placement.

Can you put LED lights in shower?

It will fit, BUT LED bulbs can only go into the proper type of fixture, rated for water. It is not recommended to put them into the typical closed shower fixture unless the fixture is rated for LED.

Do I need special light for shower?

In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.

How do you light up a dark shower?

There is a better solution to light a dark shower: the Mr Beams Ceiling Light is perfect for this application. You can mount the Mr Beams wireless LED light on the ceiling or the wall and the motion sensor technology will activate the lights when it’s dark and you’re in the shower. The LED lights are plenty bright.

How do I light my shower area?

15 Great Ideas to Add Lighting to Your Shower

1. Install a Large, Circular Light for a Modern Result.
2. Add Extra Lighting With Dark Shower Walls.
3. Maximize the Natural Light Coming In.
4. Focus on Keeping the Whole Room Bright.
5. Use the Bathroom Light for the Shower.
6. Look for a Modern and Glamorous Hanging Light.

Can you put downlights above a shower?

As mentioned above, it is always recommended you use lighting with an IP44 rating or higher when choosing ceiling lighting (as long as your ceilings are outside of electrical zones 0–2. If your downlights are to be used directly above a bath or shower, it is worth considering models with an IP65 rating.

Do shower lights need to be GFCI protected?

A. Master electrician Sean Kenney responds: The short answer is yes. Although the NEC does not require either the switch or the light fixture to be GFCI-protected, most lighting fixtures designed for use in a shower stall require GFCI protection to meet UL requirements.

Are LED light strips waterproof?

IP67-rated waterproof LED strip lights are fully waterproof, so they can be used anywhere – even externally – as long as the location is not permanently submerged.

Can you use any light fixture in a bathroom?

There are safety regulations for installing electric light fittings near sources of water, but as long as you follow some simple guidelines it’s perfectly fine to use ordinary light fittings in a bathroom.But outside those zones then any standard lights are fine to use.

Can I put LED strip lights in my bathroom?

LED strips are ideal for indirect lighting since they allow greater versatility when installing them.Thus lighting can function as a decorative element. Another very frequent use is to place the LED strips around the perimeter of the bathroom or on the lower perimeter of the bathroom furniture.

How can I make my shower brighter?

If you’re working with a dark or windowless bathroom, here are some ways you can lighten up.

1. Paint It White. If your walls are covered in light-absorbing dark paint or — gasp!
2. Light It Up. Struggling to see the bottle labels in your shower?
3. Sconces.
4. Watts the Problem.
5. Mirror, Mirror.
6. Skylight.
7. Add a Window.

What downlights can you use in a bathroom?

Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It’s also worth noting that most shower lights are rated at IP65 in any case.

Can you use 240V lights in bathroom?

The down lighters will be above the ceiling, outside the zones, provided that they are enclosed, so as stated before, 240V will be OK. It is all about the reach of the bathroom zones and where the electrical equipment is placed within them.

Are IP65 lights waterproof?

The most common waterproof LED lights are IP65 LED lights. They provides maximum protection against solid particles and a good amount of resistance against liquid particles as well. They can be fit to use for both in domestic and commercial purposes.

What size recessed light for shower?

One recessed light is enough for smaller showers (3’x3′), but for safety and style, opt for two or more in large or luxury showers.

Should bathroom light be on GFCI?

Although ground-fault circuit-interrupter (GFCI) protection is required for outlets in bathrooms and other damp locations, the National Electrical Code does not require it for bathroom light fixtures or their wall switches.

Can you wire outlets and lights on the same circuit for a bathroom?

No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles. For example, a one-family dwelling has two bathrooms and a duplex receptacle has been installed in each. One 20-ampere branch circuit can supply power to both bathroom receptacles but cannot feed anything else.

Can you put a light fixture over a bathtub?

The National Electrical Code prohibits installing a hanging ceiling light fixture within 3′ horizontally of a tub unless there is 8′ or more in clearance from the bottom of the light fixture to the top of the tub.

Can LED lights get wet?

Wet-rated LED lights may be within dripping or flowing water. They’re tightly sealed against water.The danger of an LED light being exposed to water is when it’s fully submerged. Electricity flows through the bulb, and because water is a conductor, it’s possible for electrocution to occur.