Which way do you hang shutters?
The correct installation of a fixed louver shutter should have the shutter louvers facing down and towards the back when the shutter is open (when it is not covering the window).
How should shutters be placed?
When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.
Where should exterior shutters be placed?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Should shutters be longer or shorter than window?
Since vinyl shutters don’t have that much flexibility in terms of shutter width, it is best to err on the side of the exterior shutters being narrower than 50% of the window width. In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim.
Which way should plantation shutters close?
Our shutters are designed as most shutters on the market, with the slats (also called louvers) closing fully flat in the upwards direction. While you can rotate the slats to point downward, the fully flat closure will occur by pushing the slats closed in the upwards direction.
Is it OK to put shutters on the back of the house?
Whether it’s high winds or flying debris, functional shutters act as a shield for your windows and help keep everything inside safe. Windows at the back of a home are just as vulnerable to weather damage as those in the front; therefore, shutters can provide the same benefits on both sides.
Can you put shutters on only one window?
A good rule of thumb that we advise to customers is that if you install shutters in one window within a room, you should consider using them in every window of THAT room.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Should shutters be the same size as the window?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width.Keep in mind that the shutters should look like if they could close to cover the window.
What do you do if your windows are too close for shutters?
The way to attach shutters when windows are too close.
Shutters for Other Types of Windows and Spaces
- Attach a large (double size) shutter, the size of the window on each end.
- Mount double shutters at each end.
- Mount four shutters in the manner you would normally if the window were not Ganged.
Do shutters increase home value?
If you’re trying to sell your home, adding shutters can make your home instantly more valuable. One reason for this is that high-quality shutters are classic and are liked by most buyers. shutters are custom-made for the windows, which means that the shutters will remain with the home once it’s sold.
Do exterior shutters add value to your home?
With exterior shutters, you can improve your home’s value and a lot more. This window treatment technique protects your house, boosts energy efficiency, and improves curb appeal. Shutters also enhance privacy and help transform the exterior d?cor.
How tall should shutters be?
The height of window shutters you should order is generally the actual height of the opening not counting the sill should you have one; however, many customers prefer to have the panels a little taller than the actual opening height. A couple of extra inches in height can be very attractive.
How thick should shutters be?
Shutter stiles shall be a minimum of 2-5/8 inches wide by 1 3/8 inches thick. Top rails and midrails shall be a minimum of 2 3/8 inches wide by 1 5/16 inches thick. Bottom rails shall be minimum 4 1/8 inches wide by 1 3/8 inches thick.
What width should shutters be?
Shutter Width
The width that usually works best for decorative shutter is between 25% and 33% of the total width of your window including the window trim.
Should shutters face up or down?
Tilting the shutters all the way down is a good position to leave your shutters in if you’d prefer not to adjust them with the light.But if you want to maximise the light coming into the room without opening the louvres completely, tilt the shutters downwards to bring as much light into the room as possible.
How do shutters open and close?
Opening and Closing Shutter Louvers
Most shutters have louvers connected to a tilt rod, a small rod that runs down the center of the shutter and is connected to all lovers with small staples. A simple pull up or down on the tilt rod opens and shuts your shutter louvers.
Which way do you turn plantation shutters for privacy?
The direction ? up or down ? to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.
Are shutters out of style 2021?
Window Treatment Styles And Designs That Are Out in 2021
Speaking of shutters, gray and gray-tone wood grain is rising in popularity for shutters, with all-white and dark wood shutter stains declining in popularity.
When should you not use shutters?
You should not add shutters to the following:
- Double mulled windows.
- Windows that are winder than they are tall.
- Bay windows.
- One side of a window, leaving the opposite side unshuttered.
- Windows that are so close, an open shutter would obscure part of the adjoining window.
Contents