How Do You Install Wifi On A Smart Dimmer Switch?

How do you reset the Wi-Fi on a smart light switch?

Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to factory reset the Smart Switch.

How does wireless dimmer work?

Wireless smart dimmers will function just like a standard dimmer—you can walk up to it and turn on or dim a light, but you also get the benefit of control via a smart automation app.The dimmers still need to be connected via electrical wires just like any other dimmer or switch.

How do I reset my dimmer WiFi switch?

To reset your Smart Dimmer, hold the power on/off switch down for approximately ten seconds. When the power indicator LED starts blinking rapidly, it is ready for setup.

How do I connect my Smart Life app to my WiFi?

Download & register an account on the Smart Life or Tuya App. Open app then select “+”. Now follow the instructions on the app. Enter your WIFI credentials to connect to your home network.

How do I connect to 2.4 GHz WiFi?

To connect your Android device to a 2.4 GHz network:

1. Unlock your device and tap the Settings app.
2. Tap Network & Internet > Wi-Fi.
3. Enable WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
5. If prompted, enter the password for the network.

Why is my smart switch offline?

Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.

How do I reset my tp link smart dimmer?

Press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process. To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

How does Wi-Fi smart switch work?

How Do Smart Light Switches Work? When you press buttons on smart light switches, they send wireless signals to control your smart lights (typically via WiFi, Bluetooth, Zigbee or Z-Wave).Most smart light switches require some setup using a smartphone app.

How does Wi-Fi light switch work?

A wireless light switch, also known as a remote light switch, works with a device that has a wireless antenna and a switch.Then, the wireless switch is attached to the wall. With just a simple push of a button, the switch sends the wireless signal up to this antenna to turn on or off the light.

Do smart switches work without Wi-Fi?

To start, most smart switches require a 2.4 GHz home Wi-Fi network.For large, multi-story homes, it may be beneficial to use a mesh Wi-Fi network or dedicated smart home wireless protocol, such as Zigbee and Z-Wave.

How do you reprogram a dimmer switch?

Just follow these steps:

1. Switch the light on and set to the minimum brightness.
2. Turn the light off and on three times, leaving a second in between each press.
3. The lights will go up and down in brightness to show the dimmer is in configuration mode before going off.
4. Turn the dimmer fully clockwise.
5. Use as normal.

What is smart life WiFi?

Smart Life WiFi Outlet
Wi-Fi Outlet with Energy Monitoring, Tamper-Resistant, Control Lighting and Appliances from Anywhere, in-Wall, No Hub Required, Works with Amazon Alexa and Google Assistant.

How do I add a device to Smart Life app?

Complete the Smart Life app configuration on your phone. Access the Google Home app and go to ‘Menu’ > ‘Home Control’. Tap the ‘+’ icon to add new devices or apps. From the list of devices and apps, select Smart Life.

How do I change my Wi-Fi frequency?

The frequency band is changed directly on the router:

1. Enter the IP address 192.168. 0.1 in your Internet browser.
2. Leave the user field empty and use admin as the password.
3. Select Wireless from the menu.
4. In the 802.11 band selection field, you can select 2.4 GHz or 5 GHz.
5. Click on Apply to save the Settings.

How do I change my Wi-Fi from 5GHz to 2.4 GHz spectrum?

On the top menu, select Wireless. On the right menu, select your desired network, 2.4GHz or 5GHz. Update the network name (SSID) and password (WPA preshared key). Select Apply.

How do I change my Wi-Fi from 5GHz to 2.4 GHz?

Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.

How do I connect my wemo light switch to WiFi?

Start by downloading the WeMo app (iOS and Android) to your smartphone if you don’t already have it. Once it’s downloaded and installed, open up settings on your device and go to the Wi-Fi menu. Connect to the wireless network of the WeMo Light Switch, which will look something like “WeMo. Light.

How do I reset my wemo dimmer switch?

You should only restore your device to factory settings as a last resort.

1. Step 1: Tap Edit.
2. Step 2: Find the Wemo Dimmer you want to factory restore and tap on the arrow to open the Edit Wemo screen.
3. Step 3: Tap Reset Options.
4. Step 4: Tap Factory Restore.