How Do I Fix The Delay On My Wyze Camera?

To do this, try unplugging all but one Wyze Cam. Now go to that camera’s Live Steam. If you see an improvement, try plugging in the other Wyze Cam’s one at a time. Check each unit’s Live Stream after adding one to see when the slow down begins to happen.

https://www.youtube.com/watch?v=5n10aOEW0nk

Why is my WYZE camera so laggy?

Troubleshooting Tips:
Toggle your camera’s resolution. All Wyze Cam devices have a quality setting on the top left of the live stream. Tap to choose between HD, SD, and 360p. If you’re on HD, try a lower setting as they both consume less bandwidth.

How do you sync the time on a WYZE camera?

Sync Time in Wyze App

1. Using the Wyze app, navigate to the Home tab and select any Wyze Cam or device.
2. Click the Settings icon. on the top right.
3. Tap the Advanced Settings.
4. Press the Sync Time tab to cause your Wyze Cam to adjust its timestamp to the time on your phone or tablet.

How do I change the sensitivity on my WYZE camera?

To change the Sensitivity setting:

1. In the Wyze app, tap Home then your Wyze Cam Outdoor.
2. Tap the Settings icon on the top right, then Detection Settings.
3. Move the slider left or right to lower or increase the sensitivity.
4. Your change will save automatically.

How do I sync my WYZE camera?

To set up your Wyze Cam or Wyze Cam Pan:

1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Cam or Wyze Cam Pan.
4. With your camera plugged into an outlet, tap Next in the app.
5. Pull the base from your camera and single-press SETUP on the bottom of the camera.

How do you fix a delay on a WYZE camera?

To do this, try unplugging all but one Wyze Cam. Now go to that camera’s Live Steam. If you see an improvement, try plugging in the other Wyze Cam’s one at a time. Check each unit’s Live Stream after adding one to see when the slow down begins to happen.

How do you power cycle a WYZE?

How to power cycle your Wyze Cam v3

1. Unplug the camera from its power source. This can be done either from the power outlet, or from the camera itself.
2. Allow 5-10 seconds to pass for the camera to completely discharge.
3. Plug the camera back into the power source and allow it reinitialize.

How do I change the time on a WYZE camera?

To change the clock face:

1. Open the Wyze app and tap Wyze Band.
2. Tap on the clock icon.
3. Choose one of the default clock faces and color schemes, or create your own. To use your own photo as the background, click More, then the add + button to choose from your device’s photo album.
4. Tap Save to save your changes.

How do I change the time zone on WYZE?

To change the Wyze Band time zone:

1. Open the Wyze app and tap Wyze Band.
2. Tap on the Settings gear > Time Zone. If you’ve granted location permissions to Wyze, the default should display your current location.
3. Tap to turn off the Set Automatically setting.
4. Select the Time Zone you want and confirm.

How do I restart my WYZE band?

To restart or reboot your band from the app:

1. Open the Wyze app and tap Wyze Band.
2. Tap on Settings gear icon.
3. Tap Reboot Device and confirm.

How do I adjust my Wyze camera?

You can set the sensitivity of your Wyze Cam in Detection Settings. There, you’ll see a slider with a range of 1-100. This slider will adjust the percentage of changed pixels needed to generate an event video. To change the settings, go to your Wyze app and pick the camera you would like to edit.

How do I control my Wyze camera?

To control the Pan and Tilt:

1. In the Wyze app, tap on your Wyze Cam Pan.
2. Tap the directional control pad to move your camera. You can also drag your finger along the Live Stream.

How far can Wyze outdoor cam detect motion?

Up to 300 feet in an open field.
If you have multiple walls, doors, and other structures between each device, then that optimal range will be smaller. You can check your signal strength in the Wyze app. Tap to open the Base Station, and check the three bars next to your Wyze Cam Outdoor.

How do I reset my WYZE camera?

With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.

How do I sync my WYZE base station?

To do this: In the Wyze app, tap on your Wyze Base Station. Tap on the Settings gear on the top right.
Select your network.

1. Follow the onscreen steps to connect to your WiFi network.
2. Once connected, unplug the Base Station from your router.
3. The status light will flash blue, then turn solid once complete. You’re all set!

How do I reconnect my WYZE camera?

Basic Troubleshooting

1. Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name.
2. Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network.
3. Power cycle your Wyze Cam.
4. Force close the Wyze app, then open it again.

What is error code 90 on WYZE?

Error code -90
This error means that your Wyze Cam can’t be reached by the streaming servers. Remove the microSD card if you have one.

How do I clear the WYZE app cache?

You can clear app cache and data via Settings > Apps > App info. Choose an app, choose Storage > Clear data and Clear cache.

Why is my Wyze camera blinking red?

Flashing Red, Red and Blue, or Blue
Power cycle the camera by unplugging the power and plugging it back in. If the camera returns to flashing red but never reconnects, set the camera up as a new device. In the Wyze app, tap Home then the + plus sign.

Why is my WYZE Cam offline?

Make sure the Wyze Cam Outdoor is charged. A low battery can cause poor connectivity. Check the battery level from the Home screen of the Wyze app, under the camera’s name. If the battery is low, charge the camera for 4 hours to guarantee a full charge.

How do I reset my Wyze outdoor camera?

Unplug the base station from power, wait 5-10 seconds, then plug it back in. Once the status light is solid blue, the reboot is complete.