How Do You Hide Curtain Ring Clips?

HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.

What do you do with curtain clips?

10 Uses For Curtain Clips

1. Tablecloth Weights. Use 4 curtain clips to weigh down a tablecloth.
2. Display Artwork.
3. Maximize Closet Space.
4. Organize Your Bathroom.
5. Shower Storage.
6. Wrapping Supplies.
7. Pantry Organization.
8. Craft Supplies.

How do you use drapery pins with rings?

Drapery pins (figure A) are inserted into the back (lining side) of the panels. The sharp, pointed end goes into the fabric. Insert the straight end of the pin all the way until it looks like figure B. The curved end of the pin will go through the eyelet of your drapery ring or rod carrier.

How do you use cafe curtain clips?

Slide the opened claw or clip onto the upper edge of the curtain and release the pressure. When you release, the claw or clip will grab the fabric. Attach one cafe curtain ring at the upper left and right ends of the curtain, and fasten the remainder evenly across the top of the curtain.

How do you keep curtains closed?

To simply keep the curtains closed, place the magnets just inside the vertical edge where one panel meets another. To seal all the curtain’s edges to the window opening, position the magnets across both sides and the bottom, if not the top of the curtain as well.

How do you hide curtain poles?

1. Use brackets and cornice: Any horizontal decorating molding called cornice is a great way to cover a curtain rod. It completely crowns the curtain rod and is considered the best covering for a curtain rod. Usually, brackets are installed on a cornice and then a curtain rod is used inside.

What type of curtains do you use with clip rings?

Curtain ring clips work the best with flat panels, but they also work with rod pocket curtains. Flatten the pocket, and secure the clips to the top edge of the panel. Alternatively, use clips to hang Bohemian tapestries, swatches of fun fabric hemmed along the edges, or even re-purposed sheets over your windows.

Can you use clip rings on rod pocket curtains?

Using curtain clip rings on rod pocket curtains allows for easy opening and closing. You can attach the clips in a manner that enhances how the curtain falls and looks. Keep in mind that attaching curtain rings using clips (or hooks) adds to the length of the curtains.

How do you use curtain tie backs?

Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.

What is eyelet curtains?

Eyelet curtains, or ring top curtains, are contemporary headings that uses poles for mounting. The rings on the headings give out even soft pleats for your window treatments, unlike the usual ones that use a header tape. This means they do not need much material in the same way as a taped heading would.

What is curtain rod pocket?

The most classic and common of all methods of hanging drapery, a rod pocket is a sewn-in pocket, or casing, at the top of a drapery panel that easily slips over a rod and conceals it. Drapery panels hung this way bunch nicely and have a simple, casual look.

How do you fasten curtain panels?

How to Connect Curtain Panels Without Sewing

1. Place one panel face up on a large flat surface.
2. Draw a line with a washable fabric marker and a straight edge that is 1/2 inch from the side edge of the top panel.
3. Load a fabric stapler with staples and then staple the two panel layers together along this one seam.

How do you put pins into pinch pleat curtains?

How to Insert Pins in Pinch Pleated Drapes

1. Position the pin directly behind a pleat at the top of the panel. The pointed end will face up.
2. Insert the pointed end of the pin into the buckram — or stiffening material — that lines the top of the panel.
3. Repeat the action until there is a pin behind each pleat.

How do you hide curtain hooks?

HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.

How do you hide a curtain rail?

Hardware that is going to be hidden should be strong, good quality and have a discreet profile. Common methods of hiding the track including fitting it behind a pelmet, installing it into a ceiling cavity or bulkhead, or having it hidden behind the curtain heading using a face-fix hook system.

How far apart should curtain rings be placed?

I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.

Do you need curtain rings?

The general rule is to place a ring every four to eight inches.If your curtain fabric is heavy you need more rings so measure every 4 inches. If you have light weight curtains, every 8 inches will be sufficient.