Why Is My Ring Doorbell Pro Not Turning On?

If your Ring doorbell has no power, check the status of the ring doorbell in the app and make sure it is in order. If Insufficient power or a defect in the battery is causing the Ring doorbell to lose power, then bump up the power using the Pro Power Kit or replace the batteries.

Why will my Ring Doorbell not turn on?

If your Ring Video Doorbell is plugged in, receiving sufficient voltage, and is not turning on, the device’s battery may be defective. Replace the Ring Doorbell’s battery using this battery replacement guide.

Why is my ring pro doorbell not working?

Unplug your router for 30 seconds and then plug it back in. See if your Ring Doorbell automatically reconnects. Turn off the power to your Ring Pro at the breaker box for 30 seconds, then turn it back on.If all else fails, check to make sure your Ring Pro is getting sufficient power.

How do I turn on my Ring Doorbell pro?

Setting Up Your Ring Video Doorbell Pro in the Ring App

1. Step One – Download the Ring App.
2. Step Two – Create or Log in to Your Account.
3. Step Three – Tap “Set up a Device’
4. Step Four – Scan the QR code or MAC ID barcode on your Ring device.
5. Step Five – Specify Your Location.
6. Step Six – Name Your Device.

Why is my Ring Doorbell not working after charging?

If your Ring Doorbell doesn’t work even after charging the battery, try disconnecting and reconnecting the doorbell with the app. If that doesn’t work, try taking the battery out and reinserting it. If both these don’t work, try resetting your device or hardwiring it.

How do I reset my Ring Pro doorbell?

Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.

Does Ring Doorbell pro have a battery?

The smaller package comes with a small catch, depending on how you use it: unlike the standard Ring, the Ring Pro has no battery.Ring Pro, meanwhile, must be wired into your home’s door bell chime circuit for power.

How do I know if my ring battery is bad?

Check Your Battery Charge Percentage in the Ring App

1. Tap the three lines on the top left of the Dashboard screen.
2. Tap Devices.
3. Tap the doorbell or camera you want to check.
4. Tap Device Health.
5. Check the percentage under Battery Level.

How long does a ring doorbell pro last?

Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives.

How do I know if my ring pro is working?

For Ring Pro to function correctly, the voltage needs to be listed as “Good” or (when you tap it) at least 3,900mV. Note: Even if your power source supplies 16 volts AC or greater, resistance in your wires–often due to length or age of the wires–can keep Ring Pro from receiving enough power to function.

Is Ring Pro hardwired?

Ring Video Doorbell Pro – Hardwired Smart Video Doorbell Camera.

Why did my ring lose power?

Ring Doorbell Elite
The Doorbell Elite receives power through an Ethernet cable. Therefore, if it does lose power, it’s most likely due to a slow or unstable internet connection. The first go-to attempt to fix any internet issue is to restart your modem and router.

Do Ring Doorbell batteries need to be replaced?

So unless you do happen to stock up on additional batteries, you Ring Video Doorbell will be without power for the few hours it takes to charge this battery up. If the battery goes bad within the initial 1-year warranty period, Ring will replace your battery for free.

How long do ring batteries take to charge?

around five to 10 hours
Your Ring Video Doorbell is charged using a common micro-USB cable (an orange one is included in your Ring box). The micro-USB cable can be plugged into any USB power source such as a computer. Your Ring Video Doorbell will take around five to 10 hours to fully charge.

How do I know when my ring doorbell battery is fully charged?

To charge your Ring Doorbell:
Connect any micro-USB charger to the charging port in the battery. Your battery is fully charged when the light on the battery shines a solid green.