Ready By is a smarter way to control your heating. Hive determines when your boiler should be turned on so that your home is at your desired temperature when you get out of bed or arrive home. Just like pre-heating your oven.You set up your schedule to tell Hive what temperatures you want and when.
What does ready by active mean on Hive?
Smart thermostats like Hive Active Heating have a ‘ready by’ option so it will pre-heat your home to exactly the right temperature at exactly the right time. This also means you can probably set the thermostat a bit lower, which is another simple way to save.
How do I turn off Hive ready by?
To turn Ready By off, go to your Hive app and select ‘Heating’ from your dashboard. Tap ‘Settings’ and then ‘Ready by’, swipe the toggle to the left to switch it off.
How long does Hive ready by take to learn?
Your radiator valve will learn when it is set above current room temperature via the app and when your thermostat has also switched on the boiler to provide heat to all radiators. The radiator valve will need at least 2 hours in this state to complete learning.
How is Hive installed?
The Hive hub will be connected to your broadband router. If you buy Hive’s wireless thermostat the thermostat will be fixed to a wall in your home, often an internal wall in the hallway.If you buy Hive’s wired thermostat, it will be installed in the same place as your old thermostat (as it will use the same wires).
How do you use ready by on hive?
To set up Ready By, go to your Hive app and select ‘Heating’ from your dashboard. Tap ‘Settings’ and then ‘Ready by’, swipe the toggle to the right to switch it on.
Will hive TRV save me money?
In general, yes. A smart radiator valve can save you money because it allows you to control your house’s temperature room-by-room.A smart valve can instead allow you to have fine-grained control of each room’s heating setup, potentially saving you much more money than with a smart thermostat.
Do Tado radiator valves work with hive?
They also work with Nest and Hive. Nest / Hive will control the boiler. The tado TRVs will control individual rooms but only if heat is supplied from the boiler by Nest / Hive.
Is hive worth having?
Yes, the price is a little steep but the technology you are buying into – more on this later in the review – is worth it. Hive is also boasting on its website, that by using its system over the course of a year you can save hundreds on your heating bills. The installation was hassle-free on our part.
Does hive use more electricity?
Not only they are smart, the Hive lightbulbs are LED, which are up to 80 per cent more energy efficient than traditional and rated A+ for energy efficiency, helping to cut down energy usage.
Where do I put hive receiver?
You should fit the receiver in a convenient location close to the boiler or central heating system. Make sure it’s at least 30cm away from large metal objects, such as a boiler or hot water cylinder, to avoid interference with radio signals. Take care to avoid any cables and pipes that may be buried in the walls.
Can a plumber fit hive?
In most cases, a plumber or boiler engineer would be the best person to install Hive in your home. They’ll need to make sure your Hive unit is connected correctly. In most cases, Hive installation is a pretty quick job and can usually be completed within an hour for a standard boiler setup.
How do I connect to hive?
How to install Hive
- Connect an Ethernet cable to the hub, then plug the power socket into the wall.
- A green light on the hub will turn on and start flashing for a while.
- It’ll go green again and then a yellow light will appear and start flashing.
Are radiator thermostats worth it?
The short answer is yes. In theory, having thermostatic valves installed in every room can save you up to 40 percent on your energy consumption according to TheGreenAge.com. The thermostatic valve helps save money by allowing you to adjust the temperature on different radiators in the house.
How long do Hive radiator valve batteries last?
The battery life really depends on how often you wake up the thermostat display – if you’re mainly using the app and rarely touch touch the device should last you at least 12 months. We would always recommend using good quality batteries such as Duracell or Energizer and avoid using rechargeable ones.
How often should you change radiator valves?
If you’re asking how often should radiators be replaced?, there’s no easy answer but a general guideline is anywhere between fifteen and twenty years. If your radiators are nearing this age range, it’s worth being conscious of how they’re performing.
Does nest work with tado?
Nest will integrate with any 3rd party app (except Apple HomeKit); Tado only connects with Amazon Alexa, Google Home, Apple HomeKit and IFTTT. Set up must be done through the Tado app; Nest can be configured with the app or at the unit itself. The nest cannot control radiators; Tado can (with the purchase of valves).
Do you need hive radiator valves on every radiator?
Yes by all means. Putting a Hive Radiator Valve on every radiator will give you full room-by-room control, but you can start by putting Hive Radiator Valves in a few key rooms.
Is there a monthly fee for tado?
Do existing users now need to pay? Short answer: No. I reached out to Tado via Twitter to clarify this point, and was told very clearly that existing customers can carry on using Tado, and all their current features without needing to pay a subscription.
Which is better Tado or Hive?
Tado is more recommended if you’re after a simple smart solution, with its easy installation being a big factor for many customers. While Hive is more complicated to install, it represents the more comprehensive smart home package, with many more options available if you’re interested in upgrading your home fully.
How much does it cost to run Hive?
Hive Active Plug uses an average of 40p per plug per year based on 10p per kWh.
Contents