What Is A Storeroom Lock?

Storeroom locks are used when the outside lever should be locked at all times. A key is used to retract the latchbolt and open the door; when the key is removed the door is locked on the outside.

What is the difference between storeroom and classroom lock?

Classroom Function
A storeroom function always requires a key to retract the latch and enter the room. A classroom lock can be locked or unlocked using a key in the outside lever. For both functions, the inside lever always allows free egress.

What is a dormitory lock?

Dormitory or Exit Lock function is defined as a lock where the latch bolt is operated by the lever from either side, except when the outside lever is made inoperative by a stop or mechanical means other than a key. The dead bolt is projected by the key from the outside and by turn from inside.

What is an entrance lock?

Entrance locks have a key and are used at entrances to buildings or other spaces such as offices or conference rooms. Both the inside and outside trim will operate the latch unless the outside lever is locked by button on the inside. A key will operate the latch both when the outside lever is locked.

What is a Leverset?

High Grade Levers, Built to a Higher Standard
If you are going to be using the door to carry things in or out with your hands full for example, a leverset will allow you to open the door without having to use a hand to turn a knob.

What is the purpose of a door latch?

Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.

What is a lock holdback?

By activating the Hold-back-Latch feature, the Danalock holds back the latch in your door.This feature must be activated if you don’t have a handle on the outside of your door.

What is a latch bolt?

Latch bolt An extremely common latch type, typically part of a lockset, it is a spring-loaded bolt with an angled edge. When the door is pushed closed, the angled edge of the latch bolt engages with the lip of the strike plate; a spring allows the bolt to retract.

What is an office lockset?

Office Lockset – The latchbolt is retracted by the grip on either side unless the outside grip is locked by the toggle or outside key. Operating the inside grip does not unlock the outside grip. Passage Lockset – The latchbolt is always retracted by the grip on either side. Both grips are always free.

What is the best lock for a front door?

A five-lever mortice lock with a BS 3621 standard is considered one of the best locks for a front door.

How many locks should a front door have?

Having a single sturdy lock on your door is perfect. However, two locks could add extra protection to your door/home or place of business. So one or two sturdy locks are okay for a front door lock.

What is a privacy lever?

A privacy knob or lever would be something you would probably use on a bathroom or bedroom door.These buttons will lock the knob in place until turning the knob or lever, which releases the pin. It generally has a hole on the outside where you can insert generic tool, or your wife’s bobby pin, to pop open the lock.

What is a passage lever?

Passage door knobs are similar to dummy door knobs. They don’t lock but are used to open doors and go between rooms. Passage door knobs are ideal for interior hallways, closets and other rooms that don’t need privacy locks. They’re also called unkeyed knobs.

What is an inactive door lever?

Dummy knobs do not turn. They don’t have locks, axles or latches. Dummy knobs are fake, fixed knobs used to open and close a door that doesn’t have a traditional latch. Available in common designs including handlesets and levers, dummy knobs also are used to dress up inactive doors.

Is a latch a lock?

A latch fastens a door, gate or window in position but does not provide security.A lock prevents anyone without a key from opening a door/gate/etc.

What is door latch called?

The Bolt: Also called the latch, the bolt engages the inside of the door. There is a piece of metal that extends from the door into the frame itself. This bolt is used to hold it closed.

Why are door knobs made of brass?

Brass is durable and resistant to corrosion, making it an attractive option from early on in the door-knob-making process, when knobs were first created by brazing two pieces of metal together and then through casting beginning around 1846.

How do you identify a Schlage Lock?

Identification Methods

1. Name on the key or Lock: Kwikset or Schlage are the most common residential locks and keys.
2. Name Abbreviation: Kwikset is “KW” and Schlage is “SC” The most common keyways are KW1 & SC1.
3. Name on the lock latch: look at the edge of your door on the latch for a name.

How do I know my Schlage Lock?

Look on your Schlage key. It should have 5 pin numbers stamped on the the back of the key with the letter C below the numbers.

Can you change a door handle without changing the lock?

If you have a doorknob on a bedroom door or another interior room of your home that doesn’t have a lock, the only way to fix this issue is by replacing the knob. If you want to leave the old knob, you’ll have to add a latch lock that will hold the door in place.

Can you rekey a Schlage lock without the original key?

Re-keying a Schlage without a key is difficult because the locks were purposely designed not to be easy. A locksmith could do this quickly, but may be expensive since they will need to do a house call without a key. New Schlage locks come with a reset key that allows you to re-key the lock without other existing keys.