How Do You Enter A Kwikset Lock Code?

How do you enter codes on Kwikset aura?

To add user codes to your Aura lock, download the Kwikset App on your smartphone, create an account, create a ‘home’, and add the Aura lock to your ‘home’ within Bluetooth range of the lock. Click here to view instructions.

How do I activate my Kwikset?

The lock requires a one-second pause immediately after locking or unlocking before the touchscreen will re-activate. Fully remove hand from screen until the Checkmark or Lock symbol turns off, and then activate the screen again.

How do you open a Kwikset lock with a dead battery and no key?

Use a Key To Enter Your House
If you forget your access code, cannot seem to enter the correct digits, or the battery on your Kwikset lock dies, use the key that works with your Kwikset front door lock. The Kwikset will open immediately, and then you can swap out the batteries to get the system working again.

How do you put code in Kwikset 916?

How to add a user code on my Smartcode touchscreen?

1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
2. Press Checkmark symbol once.
3. Enter Mastercode.

What is the master code for Kwikset lock?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I connect my Kwikset to my phone?

Pairing Your Lock With the Xfinity Home App
On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.

How do I reset my Kwikset door code?

How do I reset a code on my Powerbolt?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do I remove a code from Kwikset SmartCode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I change the code on my Kwikset 955?

How to enable/disable programming code on my SmartCode 955?

1. A programming code enables you to make changes without needing to access the programming button.
2. Make sure the door is open.
3. Press 3.
4. Press Kwikset button.
5. Enter a programming code.
6. Press Kwikset button.
7. Re-enter programming code.

How do I light up my Kwikset keypad?

To light up the keypad buttons, press the 1-touch locking button. Pressing the other/numerical buttons will not cause the keypad to light up. Check that the LED option is turned On in the Kwikset App. The Status LED is set to On by default.

What is the program button on Kwikset lock?

For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.

Why is my Kwikset lock not pairing?

My Lock Won’t Pair
Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. See the Installation and Programming Guides section for button locations for your Lock model.