Open “smart life” app after your register it > click “+” on the top right > click “All devices”> click” lighting devices“> then press and hold the wifi led controller for 5-6 seconds > then click the “confirm light blinks rapidly” in the app.> you can control your light strip freely now after connecting successful.
Can I connect my LED lights to an app?
A: Smart LED strip lights are strip lights that can connect to Wi-Fi and adjust lighting effects through a mobile App or voice assistant Apps like Alexa or Google Home, enabling the lights to change at your will.
How do I connect my LED lights?
You simply have to install one end of your strip to the hippo buckle connector to connect two strips together. The ‘buckle’ on the connector keeps the strips in place once installed. You can use these connectors to connect two strips together or even connect your LED strip to the power supply.
How do you connect LED lights to Alexa?
How to connect Alexa to smart lights
- Open the Alexa app, then turn on the light you want to connect.
- Navigate to the Devices tab, then tap All Devices. Quick tip: If you see a button that says Lights, tap that to connect.
- Scroll down the list to find the light you want to connect. Tap the name of the light.
Why can’t I connect to my LED lights?
Bad Pin Connection If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. These tiny connectors are rather delicate items so you have to be very careful when inserting them.
How do you connect LED strips without soldering?
How to use a Tape to Tape connector
- This is the Tape to Tape connector for single colour LED Tape.
- Cut the LED Tape along the cut line with a pair of scissors.
- Now take your Tape to Tape connector and your 2 pieces of LED Tape that you are looking to join.
- Open the connector.
Can you Bluetooth LED lights?
? Bluetooth LED Waterproof Lights: The led strip is covered by EPOXY, which means you can place it in outdoor or bathroom ,never worry about water splash or bad weather like rain or snow, only one note : the led strip is waterproof but the power supply is not.
| Light Source Type | LED |
|---|---|
| Color | Rgb (Red, Green, Blue) |
Why won’t my LED lights connect to Bluetooth?
Try to reset the light strip. Reset: Press the middle button on the control box for four times while holding the power button.Please try to unplug the light strip for 10 mins, then re-plug it.
How long do LED Strip Lights last?
LEDs have an unbelievably long expected life-span, compared to both incandescent and fluorescent lights. With an average life-expectancy of some 50,000 hours, LED strip lights will still be burning bright in 17 years’ time, long after their traditional counterparts will have expired.
Why is my type S led not working?
It can be Poor power connection, please check power connection and make sure the Smart Hub LED is flashing or try to disconnect power and reconnect.
How do you connect LED lights to music?
So, the best way to connect LED lights to your music is by turning on the music mode. And as long as the microphone is working and the music mode is turned on, the music will sync with the LED light making it pulsate to the rhythm.
Can you nail through LED Strip Lights?
Yes you can staple as long as no copper or led or resistor are touching. Make sure to not staple into the strip itself.You’d better not, It has the risk of shorting out the circuit or breaking the circuit(if you want to staple the strips as your way).
Do LED lights need to be plugged in to work?
Do LED Lights Burn Out?LEDs draw very little power so they can run for a long time on a small battery without any issues. There is no need for a bulky wall transformer and a wall plug to light your project.
Do LED lights attract bugs?
LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugsso long as they emit longer wavelengths of light.
Can you use electrical tape to connect LED lights?
Make sure to use a heat shrink over the connectors to protect them, which are different for indoor and outdoor uses. Alternatively, you can also use electrical or insulating tape. The positive and negative of the strip has to always match the negative and positive of the connector.
Contents