Some brands of door hardware like Schlage, Weiser, Kwikset, Sure-Loc and Weslock are shipped with adjustable backset latches which makes ordering easy.You can measure from the edge of the door to the center of the backplate behind the knob.
What is backset on a door?
The backset is the distance from the edge of the door to the center of the 2-1/8-inch bore hole. In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches.
What is backset size on a lock?
The backset is the horizontal distance from the edge of a door to the centre of a lockset; thus, the distance a lockset is ‘set back’ from the edge of a door is called its backset. It’s usually 1 inches or 2 inches (or 44mm and 57mm).
How do I know my backset size?
The backset is the measurement from the edge of the door to the center of the bore hole. Most door handle sets feature a 2-3/8″ or 2-3/4″ backset. To determine the backset on your door, measure the distance from the outer edge of the door, to the center, or highest point of the bore hole.
What is a backset on door latch?
The backset is the distance from the edge of the door to the spindle mechanism on the latch. Usually for a 63mm case measurement it will have a 44mm backset and for a 76mm case measurement will have a 65mm backset.
What is case and backset?
‘Backset’ is the distance from the front of the lock to the centre of the spindle as shown here.Almost ALL domestic mortice locks and tubular latches are supplied with either a 44mm or 57mm backset length. These equate to case sizes of 2.1/2″ or 3″ in imperial measurements. Commercial (DIN) lockcases are 60mm backset.
What is drive in latch?
Description. Drive-in Deadbolt Latch works where there is no door mortise. This drive-in deadbolt latch replaces a standard deadbolt latch where there is no mortise for the latch’s faceplate in the door edge.
How do I know what size door lock I need?
You can work out the size of the lock by measuring the distance from the edge of the door to the centre of the door handle or knob. This measurement will give you the approximate size of the backset which will allow you to identify which size lock or latch you have.
How do I know what size door latch I need?
An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.
What is the difference between latch and lock?
A latch fastens a door, gate or window in position but does not provide security.A lock prevents anyone without a key from opening a door/gate/etc.
How do you tell the hand of a door?
First, the SIMPLE WAY to determine door handing…
IF YOU ARE REPLACING AN EXISTING DOOR: With the door open, stand with your back against the hinge jamb. If your left hand is nearer the doorknob, then the door is LEFT-HANDED. If your right hand is nearer the doorknob, then the door is RIGHT-HANDED.
What is a Mortice?
A mortice (also spelt mortise) is a cavity or slot, usually rectangular, cut into a piece of wood or stone in order to receive a matching insert of the same dimensions.
How do you measure a backset on a mortise lock?
You can measure the mortice locks by measuring the backset and the centre. It is also advised you measure the case width and height and the forend length and width. Backset The backset is measured through measuring from the centre of the keyhole to the forend of the mortice lock.
Are all door latches the same size?
Choosing Latches For Your Door Handles or Knobs
The most common size has a casing which is 63mm in depth and the distance to the middle of the square operating spindle is 44mm.The next size of latch has a casing which is 75mm in depth and the distance to the middle of the square operating spindle is 57mm.
What is case depth on a lock?
The case depth is often simply stated as the ‘lock size’. There are many different case depths but the most common sizes are 64mm and 76mm. This is the metric equivalent to 2.5″ and 3″ lock cases from back in the imperial days, you may well have heard the term “3 inch lock case” and so on..
Are Mortice locks easy to pick?
It’s a difficult game, and most pro locksmiths will drill a curtain mortice lock (drilling can be done in such a way the lock can be reused) but as far as picking goes, it’s an incredible skill that will give you an incredible buzz.
What is a 5 point Mortice lock?
Five lever mortice deadlock
The five lever mortice deadlock is a type of door lock commonly fitted to wooden doors.It works by inserting and turning the key to move the five levers into the correct position, allowing the bolt to be locked or unlocked.
Are Mortice locks secure?
Mortice locks are generally stronger and secure than a bored cylindrical lock. Ironically, installing a Mortice Lock initially can weaken the structure of a typical wooden door, but by choosing a 5 lever Mortice Lock your home will be more secure.
Why is my door handle drooping?
A drooping handle can sometimes be caused by a mortice bar that is misaligned or too long for the door.If a mortice bar is even slightly too long, it will cause the spring to bind when the door handle is fixed to the surface of the door.
How do you adjust a Schlage door knob?
How to change the handing of your Schlage door lever
- Locate the pin tool that came with your lock.
- Insert the tool into the small hole on the lever base and gently depress the retainer pin while pulling the lever away.
- Remove and exchange both levers.
How do I know my Schlage Lock?
Look on your Schlage key. It should have 5 pin numbers stamped on the the back of the key with the letter C below the numbers.
Contents