How Do You Use Schlage Touch Lock?

While the deadbolt is locked, press the Outside Schlage Button and then enter a 4-8 digit User Code to unlock the deadbolt. Within 5 seconds, manually lock and unlock the deadbolt using the thumbturn. To restore Auto-Lock, simply lock the deadbolt using the thumbturn.

How do you use a Schlage touch keypad lock?

Just press a 9 volt battery onto the contacts below the thumbturn or lever, and enter your user code to unlock. Browse to answers.schlage.com and click on Keyless Touchscreen Locks in the menu on the right side for videos, troubleshooting, FAQ and more.

How do you lock a Schlage touch deadbolt?

Install Lock

1. Install the bolt.
2. Install the touchscreen on the outside of the door. Slide tailpiece through the slot in the bolt, and route wire over bolt.
3. Install the thumbturn assembly. Rotate the thumbturn to a vertical position.
4. Install the included battery.
5. Install reinforcement plate and strike into door jamb.

How does Schlage Smart Lock work?

The free Schlage Home app turns your iPhone or Android smartphone into your key. It also puts total control of the lock from anywhere at your fingertips using the optional WiFi Adapter. You can add, delete and email access codes, manage lock settings, set access schedules and monitor usage, right from your phone.

Is Schlage touch a Smart lock?

The Schlage Connect Smart Deadbolt combines advanced features with the enhanced security of Z-Wave Plus. It’s easier than ever to connect to your home automation system and control your lock with your voice.

How do keypad door locks work?

How Keypad Locks Work. Instead of a key, this type of lock system requires a numerical code to grant entry to a facility or property. The code is punched in by users via a numerical pad, similar to those on a basic calculator. If the correct code is entered, the door lock or deadbolt should release.

Why is my Schlage Lock not working?

Check and Replace Batteries
As mentioned, your Schlage keypad lock may not function correctly if the batteries are weak.If not, replace them with new batteries and ensure they’re properly placed. Do not mix old batteries with new ones, replace them all for the best performance.

How do I use Schlage on my smartphone?

To pair your Schlage Connect Smart Deadbolt with Samsung SmartThings, open the SmartThings app on your mobile device and tap on Home. Under Things, choose Add a Thing and follow the directions in the app. At the end of enrollment, a green light on your lock indicates success.

How do I connect my Schlage smart lock to Wi-Fi?

It’s easy to set up – plug it in within Bluetooth range of the lock (usually about 40 feet), and use the Schlage Sense app to connect the Adapter to your home Wi-Fi network. Then pair it with your lock.

How do I connect my Schlage lock to my iPhone?

How to set up your Schlage Sense Wi-Fi Adapter for iOS

1. 1Navigate to the menu in the app and click Wi-Fi Adapters.
2. 3Type in the programming code located on the back of your Wi-Fi Adapter.
3. 5Follow instructions on the screen to join the Wi-Fi Adapter’s temporary network, then return to the app to finish the setup.

How do I reset my Schlage keypad lock without the code?

So first how to Reset Schlage Keypad lock?

1. Disconnect the batteries.
2. Press and hold the Outside Schlage Button.
3. While holding the Outside Schlage Button, Reconnect the batteries.
4. Release the Outside Schlage Button.
5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

Why does my Schlage Lock blinking red?

The Schlage button flashes red continuously. What does this mean? The battery is dead. You will need to replace the battery immediately.

Is Schlage touch WiFi?

With built-in WiFi, the Schlage Encode connects directly to your home’s WiFi network – no adapters or accessories are required. Set up the lock easily with either the Schlage Home app or Key by Amazon app and you’ll be able to access it remotely, putting total control in the palm of your hand.

Can you use Schlage connect without WiFi?

As you can see, the lock has a built-in Wi-Fi, meaning it doesn’t need a smart hub to pair with your smartphone and other Wi-Fi-based systems—for remote access. It can function with and without Wi-Fi as it’s designed to work with access codes and a physical key too.

Can I connect my Schlage lock to Alexa?

Yes. Both the Schlage Connect lock with Z-Wave technology and Schlage Connect lock with Zigbee technology are compatible with Amazon Alexa-enabled devices. You will need a compatible smart home hub to pair your lock to the device.

Why is my keypad door lock not working?

If the keypad buzzes twice after a code is entered and the door fails to unlock, this means the keypad is not communicating with the lock. A reset should fix this issue.To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again.

How does the keypad work?

A keypad is one of the most commonly used input devices in microprocessor applications. In a standard keypad wired as an X-Y switch matrix, normally-open switches connect a row to a column when pressed. If a keypad has 12 keys, it is wired as 3 columns by 4 rows. A 16 key pad would have 4 columns by 4 rows.

What is Schlage lock and leave?

Enabling “Lock and Leave” allows you to just press the “Schlage” logo on the touchscreen to lock the door behind you (if set to “Off” you have to enter a user code to lock the door).In practice the Schlage Touchscreen Deadbolt is, in general, very practical.

Why does my Schlage lock opens without code?

It’s likely that when the unit was installed, the dead bolt was in the locked position. It needs to be installed (two sides joined together) when in the unlocked position. see less The Feb 23rd solution that everyone likes works by turning off the function that lets you lock without entering a code.