How Do I Reset My Kwikset Lock After Changing The Battery?

Be aware that resetting the lock will delete all codes.

1. Remove the battery pack.
2. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red.
3. Press the button once more.

Do I have to put in new code after I change batteries in my Kwikset?

If I Change The Battery In My Kevo Fob, Do I Have To Enroll It Again? No, the Kevo fob stores all of the information in memory which does not require power. When you insert a new battery, it will work just like it did before the battery was removed.

How do I reset my Kwikset keypad lock?

A factory reset will delete all codes associated with the lock.

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

Why is my Kwikset lock flashing yellow?

Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.

What is the master code for Kwikset lock?

0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I factory reset my Kwikset 910?

How to perform a factory reset:

1. Remove the batteries.
2. Press and hold the lock button on the keypad.
3. Place the batteries back in (while still holding the button)
4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

How do I set my Kwikset lock?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

How do you reset the code on a Kwikset 909?

How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory reset

1. Remove battery pack.
2. Press and HOLD the Program button while reinserting the battery pack.
3. Press the Program button once more.
4. Perform the door handing process again to teach the lock the orientation of the door.

How do I factory reset my Kwikset Smart Lock?

1 Factory Reset

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

Why is my Kwikset lock beeping and flashing red?

Solid red = Door handing process did not work properly. Keypad flashes red with fast beeping sound* for 3 – 4 seconds.Door jammed while attempting to lock – Relock door. If needed, reposition strike.

How do you open a Kwikset lock with a dead battery?

To open a Kwikset lock with a dead battery, unlock the smart lock with the appropriate key. As a last resort, you may also force open the deadbolt to access your home. After unlocking your door, take apart the Kwikset lock per the manufacturer’s instructions, and replace the batteries.

Why is my door lock blinking orange?

Orange flashes indicates lock is in the middle of a programming sequence.

How do I change my Kwikset lock code?

How do I add/delete a user code on my Powerbolt 2?

1. Make sure the lock is unlocked and the door is open.
2. Enter your Mastercode – for new install, default is 0-0-0-0.
3. Press the lock button.
4. Press 1.
5. Press the lock button.
6. Enter a new User Code.
7. Press the lock button.
8. Test the code: While your door is open, lock it.

How do you unlock a Kwikset lock code?

Programming User Codes

1. Press the button marked “program button” once.
2. Using the keypad, enter a 4- to 8-digit code.
3. Press the ‘LOCK” button to save the code.
4. Extend the bolt by pressing- the “LOCK” button.
5. Enter the new code number. The bolt should retract.

How do you reset a Kwikset 910 keypad lock?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

How do I factory reset my Kwikset 915?

Press and HOLD the Program button while reinserting the battery pack. Release button once battery pack is installed. The status LED will flash red and green. Press the Program button once more.

How do I pair my Kwikset lock with my phone?

For Android, select (+) sign (bottom right) on the main page, select “Pair A Device”. For iOS, select (+) sign (upper right) on the main page, select “Pair a Device”. Press the “Pair a Device” on the following page. Select the brand, then the product.

How do I reset my Kwikset lock code 913?

Press and hold the program button while reinserting the battery pack. Keep holding the button for 30 seconds until it beeps. Press the program button once more in 20 seconds the LED will flash green and you will hear a beep.