How to Pick a Kwikset Door Lock in a Few Easy Steps
- Step 1: Place the tension tool to the bottom part of the keyhole while applying some pressure.
- Step 2: Insert the pick and push the pistons by moving the pick up and down.
- Step 3: Push the next pistons until you open the door.
Can you mix and match Kwikset door knobs?
Builders and homeowners can mix and match the levers and deadbolts for a unique pairing of modern hardware.
How do you pick a front door knob?
Lock-Picking Tools
- Insert the tension wrench on the keyhole, like the hairpin lever in the first method.
- Insert which pick you choose just above the tension wrench.
- Move up and down and feel for the pins.
- Turn the tension wrench to the side once you hear a click.
- You have now unlocked the door!
How easy is it to pick a Kwikset lock?
Even one of Kwikset’s most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick. Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths.
How do you pick a Kwikset lock with a bobby pin?
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.
How does the Kwikset smart key work?
When the user wants to rekey the lock, the working key is used to rotate the plug 90° clockwise. A special tool known as the “SmartKey tool” is used on the small hole to the left of the keyway. This physically disengages the sidebar and wafers from the guide pins and allows the working key to be removed.
Are all Kwikset keys the same?
A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon). The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks).
What are Kwikset alternate keys?
One suggestion is that you can use the two-key set (the “alternate” keys) to temporarily rekey the lock so that a repairman can have access to the house. After the repair or whatever is finished, you can rekey back to the other key set.
Can you use any key with Kwikset Smart Key?
The Smartkey locks are only compatible with Kwikset factory-cut keys or locksmith-generated keys carefully cut to factory specs. If you try to set the Smartkey lock to a non-spec key (or even a poorly-made duplicate Kwikset key) you risk messing up the lock.
Do bump keys work?
When executed correctly, lock bumping is effective in nearly 90 percent of all cylinder-type locks produced today. Perhaps one of the most disconcerting aspects of lock bumping is that it can often go undetected, which means that your home can be broken into without any signs of forced entry.
Can you rekey Kwikset locks?
Re-keying SmartKey locks requires only three items and entails three easy steps. Users must have their functioning key, a SmartKey Learn Tool, and a new Kwikset key.Follow by removing the functioning key, inserting a new key, and turning it ?-turn counter-clockwise. Your lock is then successfully re-keyed.
How do you pick a Kwikset lock with a paperclip?
Insert the paperclip with a desired end on the keyhole. Move the paperclip in every direction. While moving the paperclip inside, make sure to exert constant pressure to the lock cylinder. Keep the paperclip moving until the Kwikset lock opens.
How do you open a Kwikset lock with a dead battery and no key?
Use a Key To Enter Your House
If you forget your access code, cannot seem to enter the correct digits, or the battery on your Kwikset lock dies, use the key that works with your Kwikset front door lock. The Kwikset will open immediately, and then you can swap out the batteries to get the system working again.
Can Kwikset locks be rekeyed to any key?
You can rekey all of your locks to match an existing key when the locks all have the same keyway.So it is impossible to slide a Kwikset key into a Schlage lock and a Schlage key into a Kwikset lock. These two locks cannot be rekeyed to match an existing key of the other.
What is SmartKey re key technology?
SmartKey is an advanced security breakthrough which allows you to rekey the lock in seconds. To rekey your lock with an entirely new key, simply insert the functioning key, turn a quarter turn clockwise, insert the learning tool, remove the existing key, and insert a new key.You just easily rekeyed the lock.
What is the difference between Schlage and Kwikset?
Both companies, Schlage and Kwikset make many different types of locks, such as residential doorknobs, deadbolts and keypads. Schlage also has a vast line of commercial products, including some heavy duty and high-security locks, whereas Kwikset has a more modest line of light commercial locks.
How safe is Kwikset smart key?
Kwikset smartkey locks are certified Grade 1 security for residential use by the Builders Hardware Manufacturers Association and are advertised by Kwikset as being invulnerable to being hacked with wires, screwdrivers, or anything else inserted in the keyway.
Do Kwikset locks come with unique keys?
Kwikset locks come in a wide range of combinations and key cuts to ensure homeowners purchasing their locks at a home improvement or hardware store receive a random key cut that cannot be identified by other homeowners, wrote Marty Hoffmann, Kwikset Vice President of Marketing.
What is the master code for Kwikset?
0-0-0-0
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Can all Kwikset locks be keyed alike?
Kwikset is another popular brand that uses the same method with their packaging. One key can actually open six locks. When we reached out to Home Depot to find out how many of their locks were keyed alike, they said, “We are not able to break out that information, and to contact the manufacturers.”
Contents