How Do I Reset My Shaw Pvr Box?

How do I reset my Shaw PVR?

How to reset your digital box

1. Locate and unplug the power cable on your Digital Box.
2. Wait 30 seconds.
3. Plug the power back into the Digital Box.
4. Wait approximately 1-2 minutes for the Interactive Guide functions to be fully restored.

How do I reboot my Shaw box?

How to reboot using the Power button

1. Ensure your cables are tightly secured.
2. Press and hold the Power button located on the front of the TV box for 10 seconds.
3. The TV box should automatically reboot.

Why is my Shaw PVR not working?

Troubleshoot your unresponsive digital box by locating and unplugging the power cable. Wait 30 seconds and reconnect the power cable to the digital box. Wait approximately 1-2 minutes for the digital box to reboot. Power the digital box on and test if it is now responsive.

How do I refresh my Shaw receiver?

By Phone

1. Call 1-888-554-7827.
2. Press 1 for English.
3. Press 1 for Shaw Direct Satellite Services.
4. Follow the prompt and enter the number associated with your account.
5. Press 5 to refresh your receivers. As this is a hidden feature, you won’t hear it mentioned.

How do I reset my Shaw Gateway modem?

In order to reboot your modem or router, follow these steps:

1. Unplug the power cord from your Shaw modem.
2. Unplug the power cord from your router.
3. Wait at least 30 seconds, then plug the power cord back into your modem.
4. Wait a few minutes until the modem comes back online.
5. Plug the power cord back into your router.

How do I reset my Shaw Blue Curve?

Quick Answer: How to reboot my BlueCurve TV Player

1. Ensure that all cables to the BlueCurve TV Digital Box are tightly secured.
2. Press and hold the Power button located on the front of the cable box for 10 seconds. The BlueCurve TV Player (XG1v3) should automatically reboot.

Why is Shaw Blue Curve not working?

If it is still not working, reset your device. Ensure the device is up-to-date with the latest version. Ensure the BlueCurve TV App is up-to-date with the latest version. If the app is still demonstrating playback issues, delete it and download again to access content.

Why does my PVR not record?

If the Recordings are not available error message appears when you try to watch a recording, you may have reached the maximum amount of paused or recorded content allowed on the Whole Home PVR, or the connection between the receiver and PVR may have been momentarily lost.

What do you do when your DVR doesn’t work?

DVR Troubleshooting

1. Make sure your equipment (TV and cable) is properly connected and powered on.
2. Make sure the coax cable is connected to the outlet.
3. Remove any objects around your receiver to allow proper ventilation.
4. Refresh your receiver.
5. Unplug your receiver and wait at least 60 seconds before plugging it back in.

How do I reboot my cable box?

To reboot, unplug the cable box from the power, either from the back of the box or from the power outlet on your wall or power strip, for approximately 30 seconds, and then plug it back in. This will begin the boot-up process.

What does refresh your receiver mean?

Sometimes, things don’t work out. The world isn’t a perfect place. So, there’s a way to force DIRECTV’s systems to reload your channel selections into their software stream. This is called “refreshing your receiver.”

How do I start my Shaw modem?

Open the My Shaw app. Under Internet, tap Manage Internet. Under Troubleshoot, next to Restart my modem, tap Restart. When asked to confirm, tap Restart.

Where is the reset button on the gateway?

Gateway reboot
Shut down your computer. Locate the Reset button on the rear of the gateway, located beside the power input. Press and hold the button for 3 – 4 seconds. Note: Do not press the Reset button for more than nine seconds.

How do I reset my Shaw xb6 modem?

How to restore factory default settings

1. Enter 10.0. 0.1 into the address bar of your Internet browser.
2. Log in to the modem with the following information: Username: admin. Password: password.
3. Choose Troubleshooting > Reset/Restore Gateway from the menu on the left.
4. Choose Restore Factory Settings.

How do I access my Shaw Blue Curve?

You can also access BlueCurve Home online using a laptop or desktop computer. Download the free Shaw BlueCurve Home app (Apple App Store or Google Play) and sign in with your Shaw ID username and password. Visit internet.shaw.ca/ and sign in with your Shaw ID username and password.

How do I turn off my blue curved TV box?

You can turn the TV box off using the Power button in its front panel.

How do I update my Shaw Blue Curve?

You can change the default time at which your BlueCurve box updates as follows:

1. Open Settings.
2. Open Preferences.
3. Open General.
4. Select Daily Update Time and press the Ok button on your remote control.
5. On the next screen, use the arrow keys on your remote control to select the time for your daily update.

Where is the record button on the Shaw remote?

Press the red RECORD button at the top right of the remote control. A new screen will appear with: “Do you want to record this program?” Use the right arrow key on your remote control to highlight yes and press ENTER.

How do I activate my PVR?

How to activate your wired HD receiver or PVR

1. Once you see the Fibe TV activation screen, press SELECT to begin the activation.
2. Select the desired language.
3. Select Activate.
4. If you?re repairing a PVR, press SELECT to restart your HD PVR.
5. If you have an HD PVR, it?s now restarting.

How do I record on Shaw PVR?

To access the PVR menu on your Digital Cable Box, press the MENU button on your remote and then choose the PVR option from the Quick Menu which appears on screen. Set a Recording – The option allows you to set a recording based on time, much like you would with a VCR.