How Do I Connect My Pushtracker To My Smartdrive?

How do I charge my SmartDrive?

To charge the drive unit, it must be plugged into a mains power outlet via the SmartDrive charging cable for approximately 3hrs for a full charge. There are LEDs on the charge box that indicate power/charging/fully charged. When the drive unit is on, 4 blue lights means fully charged.

How do I access vivint SmartDrive?

Smart Home App – Connect Smart Drive

1. Press the Menu icon.
2. Select Settings.
3. Scroll down and press Connect next to the Vivint Smart Drive.
4. Enter the H/W ID listed on the bottom of the Smart Drive, then press Done on the keyboard. The device will take a few moments to set up.
5. Turn on Playback.

How do I reset my vivint SmartDrive?

Unplug the Smart Drive for 30 seconds, then plug it back in. Wait a few minutes to see if the connection has been re-established.

How do SmartDrive cameras work?

When a vehicle with SmartDrive 360 experiences a risky maneuver, such as swerve, U-turn, high impact/collision, or the driver initiates a manual recording, video is captured from all four cameras. The video is then automatically offloaded from the SmartRecorder, along with the in-cab and forward-facing camera views.

How long does a smart drive battery last?

• Utilize a power bank
The updated PushTracker E2 has been thoroughly tested and should last approximately 16 hours for average usage with the SmartDrive MX2+ (ie. 2 miles traveled at 3 mph).

How long does it take a smart drive to charge?

approximately 2.5 hours
The estimated charge time for a full recharge of the wristband battery is approximately 2.5 hours. Although the battery in the SmartDrive drive unit is very small and compact, it can store a large amount of power.

Is the Smart Drive watch waterproof?

Once you own a SmartDrive, you will never want to leave the house without it… and you won’t have to because it is sealed and water resistant. Use it in the rain and drive straight through puddles if you want!

How do I access my vivint recording?

Tap the camera icon from the menu bar. Tap the thumbnail of the camera you would like to view to start the live feed. Tap Done to go back to the main camera screen. If you want to view recorded clips tap All clips at the bottom of the page.

How do I access my vivint DVR?

This article explains how to access your footage for Playback on the Vivint Smart Home mobile app.

1. On the home screen, tap on the Cameras icon in the lower toolbar.
2. Press the play button on the desired camera.
3. Press the rewind button.

How do I connect my vivint camera to WIFI?

Add Camera Using the WPS Button

1. Go to your router then locate and press the WPS button.
2. Go to your camera then locate and press the WPS button.
3. Go to www.alarm.com, and click Login.
4. Click Video then Settings.
5. Click Add Video Device.
6. The camera will be displayed on the screen to select from.

How do I reconnect my vivint doorbell camera?

Tap the orange Connect button in the bottom right.
Delete and Re-Add the Doorbell Camera to the Panel/Hub

1. While the panel is searching, go to your Doorbell Camera.
2. Press and hold the button on your Doorbell Camera for three seconds, until you hear a tone.
3. The camera will announce it’s connecting to your Vivint system.

How do I get my vivint doorbell back online?

Vivint Doorbell Camera Pro – Delete and Re-Add

1. Go to Device settings on your panel.
2. Delete your camera.
3. Reset your doorbell camera.
4. Wait until the doorbell resets.
5. Return to your panel and re-add your camera.
6. Return to your camera to complete pairing.
7. Wait while your panel and doorbell camera connect.

Why is my Vivint panel offline?

Several issues can cause your panel to lose the connection to your home WiFi network. A passing storm may have knocked your power and network offline. An Internet outage in the area could have caused the WiFi to go out.Find out how to test your WiFi to determine if you should contact Vivint or your ISP.

Do SmartDrive cameras have audio?

As we’ve evolved, we’ve moved more recently to the SmartDrive camera system for our new 2020 truck spec, which add side cameras, looking back along the outside of the truck.The version of the system installed in Schneider trucks does not have an inward (driver-facing) camera. It does not record sound in the cab.

Is SmartDrive always recording?

SmartDrive extends always-on recording storage capability, enhances base video capture platform workflow.

What triggers SmartDrive camera?

With SmartDrive 360, risky maneuvers such as swerving, U-Turns or collisions automatically trigger a video recording from up to four cameras simultaneously for unprecedented coverage.

Can you use smart drive in rain?

The SmartDrive is not designed to be driven in heavy rain/ snow or on wet/icy surfaces which may cause malfunc- tion or damage. Do not use in these conditions or on these surfaces.