Press up and down buttons simultaneously for 1.5 Seconds, the device will go to the function menu Interface. Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode Interface.
How do you change settings on Voopoo drag 2?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the W wattage icon flashing. The wattage can be adjusted from 5W to 80W.
How do I adjust the temperature on my vape?
How do I change the temperature of my G Pen Pro Vaporizer?
- Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds.
- Low (Blue) – 375° F / 190° C.
- Medium (Green) – 400° F / 204° C.
- High (Red) – 428° F / 220° C.
How do I change my Voopoo drag screen?
Press fire button and down button at the same time for 1.5 Seconds, the screen will flip.
How do I change my Voopoo Argus settings?
Argus Pro Functions
- Turn the device on 5 Clicks of the fire button.
- Adjust Wattage Press/hold the + or buttons.
- Lock Device Press and hold the fire button and + button.
- Reset Puff Counter Press and hold the fire button and button.
- Change Modes Press the fire button 3 times quickly.
What wattage should I vape at?
It is not surprising, thus, to find most vapers, advanced users included, tend to stick in the 50-75 watt level for their daily vaping, only bumping it up when they want to pull some tricks or try out something new. You will find many mid-range personal vaporisers built for use at this wattage level.
What temp should my Voopoo drag be?
Temperature control adjustable range : 200-600 F / 100-315C – When the temperature setting is at 1000, keep pressing “-“, it will turn to be 600 F; – When the temperature setting is at 200 F, keep pressing -, it will turn to be 315°C. c).
What is R mode on Voopoo drag 2?
R: is RBA mode. This is just regular wattage mode from 5-177W. The screen turns blue. Super: They claim when your resistance is between .
What does SS mean on Voopoo drag?
Wattage/Voltage (Power Mode)
Appropriate Wire Materials: Kanthal, Stainless Steel (SS), NiChrome (NiCr) Wattage and Voltage Mode, also referred to as Power Mode, is the most common mod setting for vapers because of its simplicity and effectiveness.
How do I change the temperature on my Voopoo drag?
Press fire button three times quickly to change between the four interfaces: Constant power temperature control SS/NI/Ti.
What settings should my vape be on?
As a general rule, dab temperatures are set between 315? to 900?. Below 315? is usually too low to vaporize cannabis concentrates. And above 900? can release carcinogens as well as a harsh, burnt vapor.
What temperature should I vape Indica?
To get maximum medical benefit from cannabis, vape your indica or sativa at 430° to consume as much CBD and CBD cannabinoids as you can. Medicinal terpenes linalool and humulene are well suited to vaping just below the 451 degrees combustion point. Of course, you can vape hybrid weed at this temperature.
What are the different modes on the Voopoo Argus?
When it comes to features, the Argus Pro has ‘Smart Mode’ and ‘RBA Mode,’ with the ability to set either Draw activation and Button firing in both modes. The ‘Smart’ mode will detect the coil, select the recommended wattage, and restrict you from going above the range for that coil.
What does the A&P mean on a Voopoo drag?
Auto puff mode is available in both Smart (S) and RBA (R) modes. Keep clicking the fire button 3 times till the screen shows the A&P setting which is shown under the wattage. P on its own is Fire button activation. A&P is the Auto Puff option.
What is RBA mode?
RBA mode allows you to build your own coils and wick them exactly how you want, it provides a fresher and more clear taste compared to the OCC coils. RBA mode is not for everyone and does require you to understand some basic principles such as coil building and how to wick a coil.
How do I adjust the wattage on my vape?
Once you know your coil’s wattage rating, start at the very bottom wattage. Then, gradually turn it up by a watt or two at a time, taking an inhale in-between. If your vape becomes too harsh or hot or tastes burnt, you know it’s a little too high, so turn the wattage back down.
Does higher wattage mean more flavor?
Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.
Is it bad to vape at low wattage?
Setting your vape to a lower wattage is okay. You can still have a taste of the flavor of the juice, but not like the depth of flavors with a higher wattage. You can achieve a pretty decent vape experience at 10 watts.
How do you change Voopoo to Fahrenheit?
co Page 5 To switch from Celsius to Fahrenheit, press the down button until the temperature reaches the lowest Celsius temperature, 100°C. Release the down button and then press the down button again and the temperature will cycle to the highest Fahrenheit temperature, 600°F.
What does TC NI mean?
First Time Temperature Control Setup:
Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
What is VPC mode on a vape?
Variable Power Curve (VPC) is an advanced function or mode option on some mods. This mode enables the user to customize different power levels (wattage) in set increments, providing a power curve over a puff duration (time). VPC was first introduced about 3 years ago and was only found on a handful of high-end mods.
Contents