Ring recommends mounting the doorbell approximately 48 inches above the ground. The doorbell must be mounted flat against a door frame, door, or wall, but there are additional installation kits that adjust the vertical and horizontal angle of a Ring Doorbell as well.
How far off the ground should a Ring Doorbell be?
approximately 48 inches
In fact, as illustrated above, viewing faces is not a problem if the Ring Doorbell is mounted at the correct height of approximately 48 inches above the ground. The motion sensors in your Ring Video Doorbell are designed to detect motion up to 180 degrees horizontally and from five to 30 feet outward from the fixture.
Can I put my Ring Doorbell on the door?
Ring Video Doorbell can be installed on the door. Among the various Ring doorbells, the Ring Peephole Camera is the best suited for installation on the door. The ideal installation would provide you a complete frontal view of your yard or street.
Can Ring Doorbell be installed on side wall?
Ring Video Doorbell (1st Gen) 720p HD video, motion activated alerts, easy installation Existing doorbell is on a side wall, 90 degrees from door (imagine a profile of visitor).Videos must be at least 5 seconds.
Can you put a ring doorbell anywhere?
So can you really install a ring doorbell without an existing doorbell? A Ring doorbell can be installed even if you don’t have a doorbell by using a plug-in transformer. To install, connect the doorbell wires with the transformer wires and plug them into a nearby wall outlet.
How high should I mount my ring camera?
About nine feet off the ground outside and seven feet inside is a good rule-of-thumb for mounting security cameras. One of the most common mistakes people make when mounting their cameras is to put them too high or too low. Too high and your camera may not be at the right angle to catch people’s faces.
Which side of door should doorbell be on?
In nearly every home, the doorbell is located on the left or right side of the front door. The bell typically isn’t on the trim surrounding the door, but rather on the wall next to the trim. In most cases, the doorbell is placed on the same side of the door as the handle, and opposite from the hinges.
Do people steal Ring doorbells?
It’s rare that Ring Doorbells are stolen given that they have special screws that secure them to the home, but most importantly that the owner will have a recording of the thief as he’s stealing the Doorbell.
Can you attach Ring Doorbell without drilling?
You can install a Ring Doorbell without drilling. Standard options include using Ring’s No-Drill mount, which uses adhesive strips to stick the doorbell to smooth, clean surfaces, or a third-party No-Theft mount for a more secure fitment. Ring’s Peephole cam will also work for doors with a peephole.
How long does ring doorbell battery last?
six to 12 months
Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives.
Can ring be installed sideways?
Certainly in the Ring Video Doorbell, the motion sensors can detect motion up to 180 degrees horizontally and from 1m to 10m outward from the doorbell itself.Mounting your video doorbell horizontally could well affect its ability to detect motion using the motion sensors.
Is there a monthly fee for ring?
Do you need a subscription to use Ring? Ring devices don’t require a Ring Protect subscription plan. Without a subscription, you can view real-time video for Ring Video Doorbells and Security Cameras and respond to alerts when they happen.
Where are doorbell transformers usually located?
Doorbell transformers are most commonly located near your electrical panel or directly on your electrical panel.
How far can Ring camera be from WIFI?
In general, a Ring Doorbell cannot be more than 30 feet away from the router.
How far does the Ring camera see?
The motion detection on powered Ring devices can detect up to 30 feet from the camera.
How do I get around my Ring camera?
How to sneak past Ring Doorbell?
- Turn on ‘Disarmed Mode’ on Ring.
- Disable ‘Motion’ Temporarily.
- Disable Specific Motion Zones Temporarily.
- Turn the Power Off to the Doorbell.
- Break off Ring’s Internet Access.
How do you put a ring on the wall?
Before mounting your Ring Video Doorbell to its mounting bracket, ensure that the security screws are unscrewed about 1/4 inch. Align the hooks on the bracket with the unit. Once the doorbell is aligned, push the doorbell in toward the wall and then apply pressure downwards.
Is ring doorbell waterproof?
All of our Ring devices are water resistant, so they’re able to withstand strong winds or rain storms.
Is ring doorbell worth buying?
If you have the money to spend, the Ring Video Doorbells are certainly worth the cost.The Ring deters criminals of all types as well. They know to look for video doorbells, so having one will usually keep them moving along.
Can ring doorbell notify two phones?
As the account owner, you have control over all of the settings on your Ring devices. If you want to use multiple electronic devices (tablet, another phone, etc.) to control your Ring devices, download the Ring app onto the additional devices and use the same login and password you use to log into the Ring app.
Can you put Ring Doorbell on brick?
Yes, the low power wires from the exterior doorbell not only charge the Ring Doorbell device, but also operated your interior door chime. Also, the Ring Doorbell can easily be install on brick, concrete, wood, or stone. All that is needed is the appropriate drill bit for installation.
Contents