From the home screen, tap the volume icon in the top right corner. Use the sliders to adjust the volume for your chimes and alerts or your doorbell chime. You can also press the icon on the left end of volume slider to mute them.
How do I silence my Vivint panel?
From the home screen of your SkyControl, in the top right corner, tap the yellow bell. Tap on the alert to read the message fully, and correct as necessary. By reading the alert, it will be considered Acknowledged and the beeping will silence.
How do I silence my vivint alarm without the code?
To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.
Why is my vivint beeping?
Why is my panel beeping? You’re panel will beep for two reasons. When the system is armed and a door or window is opened, the panel will begin to beep a countdown for you to disarm the system before an alarm is triggered. The other reason that your panel would beep is to alert you of a notification.
How do I silence Vivint notifications?
Press More from the bottom of the home screen. From the menu, choose the wrench icon, titled settings. Choose Push Notifications. Toggle the switch on or off.
What happens when Vivint alarm goes off?
Once an alarm goes off, the procedure is similar to that of the burglar alarm.In either case, your verbal passcode will be required to cancel the alarm. If we’re unable to reach you, or we do reach you and you confirm there’s an actual emergency, Vivint will dispatch the local authorities, and notify you of the alarm.
Can the panel duress code be changed Vivint?
Your Vivint system will have a default duress code programmed to the panel. If you do not remember your duress code, you can check it on your panel by accessing your users and tapping on the duress user. We recommend that you do not change this code so that Vivint can assist you.
What is the Vivint duress code?
What is a duress code and how do I use it? The duress code is for situations when you need emergency personnel sent to your home but don’t want to alert an intruder that you are calling for help.
How do I remove Vivint motion detector?
If you are replacing an existing sensor, delete it from the panel with the following process: tap the three dot Menu icon in the bottom right corner then Devices, enter your PIN, tap Sensors and select the device you want to remove, then tap Delete and confirm you want to delete the sensor.
Why does my Vivint panel have a green light?
Slow Blinking Green: Device not provisioned (i.e. set up to work with your system yet); ready to provision. Contact support.
Does vivint monitor carbon monoxide?
Fast, life-saving detection
If there is carbon monoxide in your home, you need to know about it as quickly as possible so you can get to safety. Vivint CO Detectors use electrochemical sensors, which are highly sensitive in detecting gases. This means fast, accurate detection of dangerous CO levels in your home.
Can I use Vivint app without monitoring?
Yes, you can use Vivint equipment without monitoring. However, you cannot use the app on your phone. You can still arm and disarm the alarm, and have it set up to automate things such as a door lock or thermostat whenever you leave.
What is Vivint silent exit?
On the Exit Delay screen, a Silent Exit button is displayed. Selecting any of these options silences the Exit Delay beeps while the system is being armed. When arming, selecting this option doubles the length of the Exit Delay.
Does Vivint listen to you?
Vivint comes with 24/7 professional monitoring, but the monitoring agents do not access your cameras’ streams or recorded videos. However, Vivint can be hacked by outsiders who can control your devices from another location and spy on you through your cameras.
What is panel duress on CPI app?
A duress alarm also means immediate dispatch for those systems with central station (for those without, duress is a useless feature and should probably be removed (delete user 8 code on 2GIG panel))
The Vivint Smart Home app gives you access and control to your home from anywhere.? You can also activate a Panic alarm, request dispatches, and notify Vivint of false alarms.
The Vivint medical pendant is a wearable panic button. It weighs less than half an ounce, and is easy to keep on your (or a loved one’s) person. Wear it as a necklace, lanyard, medical alert bracelet, or attached to a belt. Like other medical alert devices, simply press the button to trigger your alarm.
How do I turn off vivint fire alarm?
To disarm, press the Shield icon in the middle of the screen and drag down. If there is an alarm in process, tap the Alarm icon in the center to disarm the system and cancel the alarm. Tap Yes or No to let Monitoring know if it was a false alarm.
Does vivint charge for false alarms?
Does Vivint Charge for False Alarms? According to Vivint, some cities charge a false alarm fee. For more detailed information about false alarm fees, give Vivint’s Customer Care team a call at 855-298-7730.
How do I silence vivint low battery?
You can silence the Vivint low battery notification by tapping the alert notification on the left side of the SkyControl’s home screen and reading the whole message. In rare instances, you may have a bad backup battery, and you will need to contact Vivint directly for support.
What makes a motion detector go off?
A motion detector sees movement, but it relies on what that movement is doing. Namely, changing light or shadow levels as they go by. Because the sensors rely on these movements, it’s possible that the way a tree is blowing in the wind and casting patterns on the carpet can be enough to set off a motion detector.
Contents