How Do I Activate My Prepaid Meter Online?

How to activate conlog prepaid meter

1. If your prepaid meter number begins with 45 or 46, type in your meter number and press enter.
2. Type the 1st 20 digits of your meter activation token, then enter.
3. Type the 2nd digits of your meter activation token, then enter.

How do I activate my prepaid meter?

To load your Meter Activation token carryout the steps below:

1. Punch in the first 20 digits and press “enter”.
2. Meter will display succeed.
3. Then continue with the next 20 digits and press “enter”. The meter will display “succeed”
4. After this, you can buy energy.

How do I know if my prepaid meter is activated?

How do I know my meter has been activated? Log on to IE portal http://www.ikejaelectric.com/keychange/. Input your meter number and click the submit button. Activation token will be displayed instantly.

How do I activate my PHCN prepaid meter?

To activate Your EDMI box, you’d need to input the 2 20 digit tokens that were issued with the meter and EDMI box. Enter them one after the other, pressing enter each time. Wait for the “Success” prompt each time before continuing.

How do I activate my new token meter?

KPLC meters activation can be done from the comfort of your home through purchasing tokens via M-PESA and AirtelMoney.
M-PESA.

1. Enter KPLC prepaid business number 888880 or 88888.
2. Enter your 11 digit meter number.
3. Enter amount between 250 and 35,000.
4. Enter your M-Pesa pin.

How can I get my token meter number?

To retrieve your last purchase, SMS your meter number to 31371 and your token will be sent back to you.

How can I recharge my PHCN prepaid meter Online?

You can use the official site PHCN (Power Holding Company of Nigeria) at http://www.phcnpins.com/ to load PHCN prepaid meter online or to pay electricity bill online.
Type in your mobile phone number.

1. Enter your email address.
2. Type in the amount to pay in Naira.
3. Click on ‘Submit’ to complete your payment.

How do I recharge my CIU prepaid meter?

Buy electricity online get the token and recharge by inputting the 20 digits into the customer user interface unit and press enter (Blue button). The feedback response from the meter will be ”Accepted”.

How do I get my Ikeja electric activation code?

Log on to IE portal http://www.ikejaelectric.com/keychange/. Input your meter number and click the submit button. Activation token will be displayed instantly.

What do I do if my prepaid meter is not working?

Start resolving error 30 on your prepaid meter by switching off your meter and your mains switch. Keep your meter off for a few minutes. Now turn the meter on and retry feeding in your tokens. If you keep getting error 30, then it is time to lay your hands off the meter and contact a technician from your municipality.

Why is my token not working?

If you see a red blinking light, or when there is no light, this means the Token is not working. You need to replace your Token if it is lost, faulty, damaged, or when the battery is low. Please bring in your faulty/damaged Token and original ID with barcode for replacement.

How do I reset my prepaid meter?

To reset your prepaid meter, make sure all your appliances are switched off, this is very important. Then Press the ‘I’ key then 008 on the device, a screen will appear showing your consumption days and other information, press the ‘I’ key again twice to reset your prepaid meter.

Why is my prepaid meter rejecting my token?

WHY DOES MY METER REJECT TOKENS? This may result from using the wrong meter number when vending, a faulty meter or change in tariff index. The customer is required to visit any of our nearest customer care units or contact us through our contact channels(helplines, social media & live chat) for immediate assistance.

How do you load prepaid electricity?

How do I load the pre-payment meter with electricity? When you purchase electricity you will receive a slip, an SMS or an e-mail (depending on the method of purchase). This slip will include the meter number and a 20 digit token. Punch the 20 digit token number into the meter, followed by the enter button.

How do I pay my NEPA bill online?

Steps to make your payment

1. Visit quickteller.com/phcn.
2. When on the site, provide the 12 digit unique PHCN customer account number you were given at PHCN office.
3. Provide your valid email address.
4. Provide your phone number in the space provided.
5. Enter the particular amount of money you want to pay in the space provided.

How do I validate my meter number?

Check meter number: To know your meter number, press 65 then the blue button, the meter number is the 11 digit numbers that displays on the screen. Balance: To check balance, press “07” on the keypad and then press the blue button.

How do you unlock a meter box?

1. A pair of needle nosed pliers, work just fine.
2. A screwdriver, at the contact point, works.
3. A new key costs less then a quid, at a diy store.
4. Any other meter key, will open your meter box, all the keys are the same.

How do I redeem tokens online?

To load the token via vendor, you will need to know your meter number before meeting the vendor.

1. Check your meter number by dialing 100 on the meter and it will be displayed.
2. Visit the vendor and make payment for your choice.
3. Give the vendor your meter number.
4. Collect the 20 digit token from the vendor.

Why is my prepaid meter not showing light?

An incident where your prepaid meter is showing a blank screen happens when their is a disconnect between your meter token gadget and the sub power transmitter adapter connected to it. Loose wires is a major cause for this problem.