https://www.youtube.com/watch?v=kiiK5xub4pU
How do I turn on Voopoo?
Power on/off: Press the fire button 5 times continuously.
How do you switch on Voopoo drag?
Voopoo Drag S How to use/button functionality
- Powering on & off: Tap the fire button 5 times.
- Changing modes: Tap the fire button three times to change from ‘RBA’ to ‘smart’ modes.
- Locking & unlocking the device: Hold the up button and power button at the same time.
If your e-cigarette does have a fire button, it can be turned on by pressing the button five times quickly in succession. For most e-cigarettes, you’ll need to press the fire button 5 times in 2 seconds – this is to prevent your device going off unexpectedly in your bag or pocket!
How do you unlock drag?
How To Lock/Unlock The Drag 2 Mod: To lock the device, press the fire and up + adjustment buttons simultaneously. To unlock the device, repeat the process. How To Switch Screen Orientation: To switch the screen orientation, press the fire and down adjustment buttons simultaneously.
How do I unlock Voopoo Vinci?
VOOPOO VINCI pod system kits are shipped in a locked position. In order to unlock your device, simply click the ‘power button’ three times quickly. This will unlock your VOOPOO VINCI.
How do you unlock the Voopoo Argus gene?
Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device.
What is gene chip Voopoo?
As The Chip
VOOPOO GENE Tech platform devotes to developing the most innovative technology of muti-analysis to achieve power control, temperature control, mode switching, power management and other smart functions.
Why is my Voopoo not working?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I unlock my Voopoo mojo?
Upon updated, you can lock/ unlock MOJO by long pressing both + and FIRE buttons. This greatly prevents firing in unintended touching of the mod. 2. Long pressing both + and FIRE buttons to LOCK/UNLOCK MOJO (there will be a LOCK/Unlock icon on the screen).
How do I change the voltage on my Voopoo mojo?
Press fire button 4 times rapidly to enter the custom power or temperature curve menu (Under power mode, the upper right corner will show the adjustment power value.
What is pulse mode vape?
Pulse mode
Essentially, the mode switches the relatively consistent output of most devices by a regular pulsing of output, which occurs every 0.2 seconds as long as you hold down the fire button.
What wattage should I vape at?
It is not surprising, thus, to find most vapers, advanced users included, tend to stick in the 50-75 watt level for their daily vaping, only bumping it up when they want to pull some tricks or try out something new. You will find many mid-range personal vaporisers built for use at this wattage level.
How do you change Voopoo to Fahrenheit?
co Page 5 To switch from Celsius to Fahrenheit, press the down button until the temperature reaches the lowest Celsius temperature, 100°C. Release the down button and then press the down button again and the temperature will cycle to the highest Fahrenheit temperature, 600°F.
How do you charge a drag vape?
Charge the Voopoo Drag Max by connecting it to your computer using the included USB-C cable. While the device charges, the screen displays a pair of battery icons to indicate the charge status of the two battery cells. When both battery icons read 100%, the batteries are fully charged.
What is RBA mode on drag S?
RBA mode really is just standard variable wattage allowing to adjust right up to the maximum 60w whatever the resistance is.
How do you charge a Voopoo gene?
How Do I Charge The Voopoo Vinci Pod? Using the supplied Type-C USB charging cable, plug the cable into the USB port on the bottom of the Vinci body. Connect the other end into a suitable power source (typically 5V/1A). Whilst charging, the GENE logo will illuminate and slowly cycle on and off.
How do you activate auto draw on Voopoo drag S?
Auto-draw. The Drag S comes with an Auto-draw mode, you can of course switch between using the button instead, as well as both at the same time by clicking the fire button 3 times. The auto draw is quick to fire, and I find very responsive.
Contents