How Do You Read A First Generation Smart Meter?

How to read a first generation (SMETS1) Octopus installed Secure™ Smart Meter

1. Press 9 on the keypad.
2. You’ll see the letters “IMP R01” appear on the screen.
3. Wait a moment – then eight digits will appear, followed by “kWh” towards the bottom right of the screen.
4. Take the first 7 digits – this is your reading.

How do you read a smart meter with A and B button?

If your meter has A and B buttons under the screen

1. press the A button.
2. press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’
3. write down the number from left to right.
4. ignore any zeroes at the beginning and any numbers after the decimal point.

How do you read OVO SMETS1 meter?

1) How to read your first-generation smart meter (SMETS1) installed by OVO

1. Press 9 on the keypad.
2. Your smart meter screen will show a series of letters: IMP KWH.
3. You’ll see 8 digits (eg 0001234.5) followed by kWh at the bottom right of the screen.

How do I read an old electric meter?

To read correctly:

1. Read the dials from left to right.
2. If the pointer is between two numbers, always take the lower number.
3. If the pointer falls between 9 and 0, write down 9.
4. Ignore red dials, ones marked ‘100 per rev’ and the largest dial.

How do I read my electric meter from my smart meter?

To get a reading from these smart meters:

1. Press 9 on the keypad.
2. A series of letters will appear: IMP KWH.
3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
4. This is your read, so in this case your reading would be 12565.

Can you read a smart meter yourself?

If you prefer to take electricity and gas readings for yourself, here’s how you can check how much energy you’re using by reading your smart meter. You can read your smart meter by taking a look at your in-house smart meter display unit.

What type of smart meter do I have?

The easiest way to tell is to look at your electricity meter. If the serial number starts with 19P, this indicates it’s a SMETS1 meter. If it starts with 19M, then this means it’s SMETS2.

What do the symbols mean on my smart meter?

What do the lights on my smart energy monitor mean? The illuminated button at the bottom of the monitor shows your electricity usage. Green is low, amber is medium and red is high. Blue is for gas only.

What do the numbers mean on a smart meter?

There are three displays on your smart meter. The first lets you know if your electric service is on.The second shows you how much electricity in kilowatt-hours (kWh) you have used for the current billing term. That’s also called your cumulative usage. The third number shows your electricity demand reading.

How do you read a digital electric meter UK?

To read the meter:

1. Read the first 5 dials from left to right – ignore any red dials or dials marked 1/10.
2. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9.
3. If the pointer is directly over a number, write down that number and underline it.

How do I read my current meter reading?

When reading an electric meter, read and write down the numbers as shown on the dials from right to left. When the pointer is directly on a number, look at the dial to the right. If it has passed zero, use the next higher number. If it has not passed zero, use the lower number.

How do you read a SMETS2 meter?

How to read your EDMI SMETS2 Meters: To read your electricity meter, press the button on the right to wake up the meter screen. You should see the words ‘Active Import Register’, and a number which is your meter reading. The display will automatically cycle through other screens, but this first one is your reading.

Do smart meters still need to be read?

You don’t need to take any readings with a smart meter, it will do that automatically. But if you want them for your own peace of mind, you can still get them.

Where is the serial number on my smart meter?

If you have a smart meter installed, your Meter Serial Number should be found next to a barcode on the front of the meter box. On electricity smart meters, the Meter Serial Number will begin with either ’14P’ or ’15P’.

What does a red triangle on a smart meter mean?

A red triangle is yet another sign of an alert. Your smart meter is trying to tell you something, though deciphering what this is can be difficult. A red triangle could be a sign of an unread alert, just like the beeping. Temporary loss of signal, such as a power cut, could also cause a red triangle to appear.