If you have a few track lighting fixtures or IKEA light fixtures that use small halogen bulbs, there are finally decent to good LED replacements that use about 1/10th the energy but still make nice light.
Can I replace halogen bulbs with LED in track lighting?
Yes, in many cases, you can simply replace your bulbs separately, one by one.Replacing your existing incandescent or halogen bulbs with durable LED bulbs offers numerous benefits. You enjoy an even better light performance and benefit from very low energy consumption.
Do you need to change the transformer for LED lights?
They will have a transformer either in the ceiling or light fitting. Some LED bulbs, like the Philips Master LED range, have in-built circuitry that can deal with most (but not all) transformers, so you don’t have to change them.
What happens when you switch from light bulbs to LED?
Making the switch to LED light bulbs offers significant energy savings over incandescent, halogen and compact fluorescent alternatives. On average, LEDs consume 80% less energy when compared to incandescent light bulbs.
Will LED bulbs work with ballast?
No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs. Incandescent and halogen lamps do not require a ballast.
Can I use an LED bulb in a CFL fixture?
You can easily choose LED replacements for existing CFL bulbs and fixtures by knowing the correct pin-type, and buying easily available plug-and-play options with the same pin-type but are LEDs instead of CFLs. LED bulbs consume less electricity and also provide better quality light.
Can I mix LED and halogen bulbs in same fixture?
Put simply, you can also mix LED and halogen bulbs together and it’s an easy way to slowly start transitioning your fixtures to energy-saving LED lights.You will have issues with flickering lights, because the fixture may not be designed to deliver different power levels to different sockets.
Can LED lights work without an adapter?
LED strips, unfortunately, are not as simple as traditional incandescent light bulbs when it comes to installation and set up. Because they run on low voltage DC, they require a power supply device that converts 120V/240V AC (depending on your location) into the voltage signal that LED strips can use.
How do I know if my transformer is LED compatible?
How Do I Know I’ve Found a Compatible Transformer for My LEDs?
- It Has a High IP Rating.
- The Output Voltage Matches That of Your LED Bulbs.
- Its Output Current Is Higher Than That of Your LEDs.
- Its Power Factor Is Above 0.9.
- Its Output Wattage Equal or Higher Than That of Your LEDs.
- It Has Dimming Ability.
- It’s Compact in Size.
What is the difference between a transformer and an LED driver?
LED drivers and electronic transformers for retrofit LED lighting are not interchangeable. They differ in output and load compatibility i.e. which LED lights they will work with. The fundamental difference between the two is that LED drivers output DC while electronic halogen transformers output 12VAC.
What are the disadvantages of LED lights?
What are the disadvantages of LEDs?
- High up-front costs.
- Transformer compatibility.
- Potential color shift over lamp life.
- Performance standardization has not yet been streamlined.
- Overheating can cause reduced lamp life.
What can go wrong with LED lights?
Common Problems with LED Lighting
- LED Light Flickering.
- LED Buzzing or Humming Noise.
- Too Bright light.
- LED Light Too Dim.
- LED Light Stopped Working.
- LED Flashes on and then Goes off.
- LED Dimming Does not work.
- LED Strip Showing the Wrong Color.
Are all LED lights the same?
Not all LEDs are the same
Unlike Compact Fluorescent Lamps (CFLs), LEDs are currently not regulated for energy efficiency or characteristics such as colour. This means you may experience greater variation in their performance.
Do I need to remove the ballast to use an LED bulb?
A plug and play LED is a fixture where you can install LED bulbs to what was once a fluorescent bulb. This is an easy solution and requires minimal effort on your part. Since it works with the existing ballast, there is no need for rewiring or ballast removal.
Can I bypass the ballast for LED lights?
Since LED lights work on low DC voltage, they need a driver. Most T8 LED tubes do not need a ballast. So, if you are going to install a T8 LED tube light, it will require a ballast bypass unless you choose a ballast compatible T8 LED tube.
Can a plug and play LED bulb be used without a ballast?
Plug-and-play T8 LED pros and cons (UL type A)
The lamp snaps into the existing fixture without any wiring modifications, meaning installation can be done by virtually anyone, as long as your existing ballast is compatible.
Is it worth replacing CFL bulbs with LED?
So, is it worth switching from CFL to LED? If your CFL bulbs are working, it’s usually not worth replacing them with LEDs immediately LEDs are more efficient, but the savings aren’t huge. Only replace them now if your CFLs aren’t suited to the fitting or are damaging fabrics. Otherwise, wait until they’re burned out.
Why should you not use LED bulbs in enclosed fixtures?
Enclosed fixtures that don’t allow for proper ventilation can drastically affect the temperature of the LED bulb, causing it to overheat and shortening the lifespan of the bulb. That’s why some bulbs will tell you not to use it in an enclosed ceiling fan or fully enclosed porch light fixture.
Do LED lights draw less power?
LEDs use much less energy than incandescent bulbs because diode light is much more efficient, power-wise, than filament light. LED bulbs use more than 75% less energy than incandescent lighting. At low power levels, the difference is even larger.
Do LED light bulbs get hot?
Yes, new technology LED lighting can and will get hot, but when compared to the lighting of the past, temperatures are much safer. The heat from the lighting will also warm your surrounding environment but in comparison to old incandescent lighting, this ambient heat is greatly reduced when using LED lighting.
Can you replace G9 halogen bulbs with LED?
Yes, the G9 LED is a direct replacement for the G9 halogen bulb. You don’t need a transformer or LED driver (see section 6). So there you have it, changing to this LED is the easiest thing in the world. But, before you change them over, make sure the lights are switched off.
Contents